Dispatcher crashes everytime guaranteed if there is a single dead host kamailio exits with a core dump (see below). If there are two dead hosts entire kamailio locks up (no core dump). Any ideas on this one? The invalid flag is never marked in the DB btw.
Crashes at ds_select_dst having never reached "COMPLETED FIRST DST LOOKUP"
# ------------------------- request routing logic ------------------- # main routing logic # ------------------ route{ # initial checks if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; xlog("[$TF] VALID RECV $rm\n $fu ($si:$sp) to $ru\n"); $avp(orig_du) = $du; if($(fU{s.select,1,-})){ # from a user-formed message $avp(user) = $(fU{s.select,0,-}); xlog(" USER $avp(user) DETECTED\n"); } if(pv_isset("$avp(user)") && !ds_is_from_list()){ # from client # route to client PBX if(method == "REGISTER"){ route(3); } else { route(1); } } if(ds_is_from_list()){ # from client, outbound from pbx xlog(" IS FROM PBX\n"); if(is_e164($rU)){ xlog(" IS E164"); # all pbx-pbx traffic should be in user format # since this is pbx-non-pbx send it to gateway # gateway only takes E164 route(2); } if($(rU{s.select,0,-})){ # send directly from pbx to client route(4); } } if($si == "GATEWAY_IP_ADDRESS"){ # lookup enum # route to appropriate pbx via DISPATCHER based on user returned xlog(" CALL FROM GATEWAY\n"); } } route[1]{ route(3); xlog(" ROUTED to $avp(user) PBX\n"); ds_select_dst($avp(user),"7"); xlog(" COMPLETED FIRST DST LOOKUP\n"); if($avp(orig_rd) == $rd){ exec("kamctl dispatcher reload"); ds_select_dst($avp(user),"9"); } xlog(" host is now $rd; all is $ru || $du\n"); if($avp(orig_du) != $du){ t_on_failure("1"); if(!t_relay()){ xlog(" T_RELAY() FAILED\n"); sl_reply_error(); } } else { xlog(" RELOAD STILL YIELDED NOTHING\n"); } } route[2]{ xlog(" Sending to gateway..."); #$rd = "GATEWAY"; } route[3]{ #register if(!www_authorize("domain.net","subscriber")){ www_challenge("domain.net","0"); return; } else { xlog(" AUTHENTICATED $avp(user)\n"); save("location"); return; } } route[4]{ $rU = "2-1"; #$rd = "10.1.40.7"; #$rp = "16314"; lookup("location"); xlog(" ROUTING TO USER $rU\n"); forward(); } failure_route[1]{ xlog(" FAILED FAILURE_ROUTE[1]\n"); if(t_any_timeout()){ xlog(" MARKING DEAD HOST $du\n"); ds_mark_dst(); xlog(" TIMEOUT!\n"); } }
0(2934) ERROR: <script>: [Thu Dec 2 20:15:34 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:43899) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX 0(2934) ERROR: <script>: mark#1 0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.166:5060 0(2934) ERROR: <script>: [Thu Dec 2 20:15:35 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:43899) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX 0(2934) ERROR: <script>: mark#1 0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.166:5060 1(2935) ERROR: <script>: FAILED FAILURE_ROUTE[1] 1(2935) ERROR: <script>: MARKING DEAD HOST sip:xxx.xxx.xxx.166:5060 1(2935) ERROR: <script>: TIMEOUT! 0(2934) ERROR: <script>: [Thu Dec 2 20:15:50 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:29372) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX 0(2934) ERROR: <script>: mark#1 0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.165:5060 0(2934) ERROR: <script>: [Thu Dec 2 20:15:50 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:29372) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX 0(2934) ERROR: <script>: mark#1 0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.165:5060 1(2935) ERROR: <script>: FAILED FAILURE_ROUTE[1] 1(2935) ERROR: <script>: MARKING DEAD HOST sip:xxx.xxx.xxx.165:5060 1(2935) ERROR: <script>: TIMEOUT! 0(2934) ERROR: <script>: [Thu Dec 2 20:15:55 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:29373) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX
:::::Core file from crash with 1 invalid host::::: Program terminated with signal 8, Arithmetic exception. #0 0x0069e92b in ds_select_dst (msg=0x82ffb00, set=2, alg=7, mode=0) at dispatch.c:1720 1720 i = (i+1)%(idx->nr-1);
Thanks for any help on this one! -Eric
Hello,
do you have parameter use_default set to 1?
Cheers, Daniel
On 12/3/10 6:47 AM, Eric Hiller wrote:
Dispatcher crashes everytime guaranteed if there is a single dead host kamailio exits with a core dump (see below). If there are two dead hosts entire kamailio locks up (no core dump). Any ideas on this one? The invalid flag is never marked in the DB btw.
Crashes at ds_select_dst having never reached "COMPLETED FIRST DST LOOKUP"
# ------------------------- request routing logic ------------------- # main routing logic # ------------------ route{ # initial checks if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; xlog("[$TF] VALID RECV $rm\n $fu ($si:$sp) to $ru\n"); $avp(orig_du) = $du; if($(fU{s.select,1,-})){ # from a user-formed message $avp(user) = $(fU{s.select,0,-}); xlog(" USER $avp(user) DETECTED\n"); } if(pv_isset("$avp(user)") && !ds_is_from_list()){ # from client # route to client PBX if(method == "REGISTER"){ route(3); } else { route(1); } } if(ds_is_from_list()){ # from client, outbound from pbx xlog(" IS FROM PBX\n"); if(is_e164($rU)){ xlog(" IS E164"); # all pbx-pbx traffic should be in user format # since this is pbx-non-pbx send it to gateway # gateway only takes E164 route(2); } if($(rU{s.select,0,-})){ # send directly from pbx to client route(4); } } if($si == "GATEWAY_IP_ADDRESS"){ # lookup enum # route to appropriate pbx via DISPATCHER based on user returned xlog(" CALL FROM GATEWAY\n"); } } route[1]{ route(3); xlog(" ROUTED to $avp(user) PBX\n"); ds_select_dst($avp(user),"7"); xlog(" COMPLETED FIRST DST LOOKUP\n"); if($avp(orig_rd) == $rd){ exec("kamctl dispatcher reload"); ds_select_dst($avp(user),"9"); } xlog(" host is now $rd; all is $ru || $du\n"); if($avp(orig_du) != $du){ t_on_failure("1"); if(!t_relay()){ xlog(" T_RELAY() FAILED\n"); sl_reply_error(); } } else { xlog(" RELOAD STILL YIELDED NOTHING\n"); } } route[2]{ xlog(" Sending to gateway..."); #$rd = "GATEWAY"; } route[3]{ #register if(!www_authorize("domain.net","subscriber")){ www_challenge("domain.net","0"); return; } else { xlog(" AUTHENTICATED $avp(user)\n"); save("location"); return; } } route[4]{ $rU = "2-1"; #$rd = "10.1.40.7"; #$rp = "16314"; lookup("location"); xlog(" ROUTING TO USER $rU\n"); forward(); } failure_route[1]{ xlog(" FAILED FAILURE_ROUTE[1]\n"); if(t_any_timeout()){ xlog(" MARKING DEAD HOST $du\n"); ds_mark_dst(); xlog(" TIMEOUT!\n"); } }
0(2934) ERROR: <script>: [Thu Dec 2 20:15:34 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:43899) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX 0(2934) ERROR: <script>: mark#1 0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.166:5060 0(2934) ERROR: <script>: [Thu Dec 2 20:15:35 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:43899) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX 0(2934) ERROR: <script>: mark#1 0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.166:5060 1(2935) ERROR: <script>: FAILED FAILURE_ROUTE[1] 1(2935) ERROR: <script>: MARKING DEAD HOST sip:xxx.xxx.xxx.166:5060 1(2935) ERROR: <script>: TIMEOUT! 0(2934) ERROR: <script>: [Thu Dec 2 20:15:50 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:29372) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX 0(2934) ERROR: <script>: mark#1 0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.165:5060 0(2934) ERROR: <script>: [Thu Dec 2 20:15:50 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:29372) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX 0(2934) ERROR: <script>: mark#1 0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.165:5060 1(2935) ERROR: <script>: FAILED FAILURE_ROUTE[1] 1(2935) ERROR: <script>: MARKING DEAD HOST sip:xxx.xxx.xxx.165:5060 1(2935) ERROR: <script>: TIMEOUT! 0(2934) ERROR: <script>: [Thu Dec 2 20:15:55 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:29373) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX
:::::Core file from crash with 1 invalid host::::: Program terminated with signal 8, Arithmetic exception. #0 0x0069e92b in ds_select_dst (msg=0x82ffb00, set=2, alg=7, mode=0) at dispatch.c:1720 1720 i = (i+1)%(idx->nr-1);
Thanks for any help on this one! -Eric
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Yes, I do.
Date: Fri, 3 Dec 2010 10:31:51 +0100 From: miconda@gmail.com To: mrraptor98@hotmail.com CC: sr-users@lists.sip-router.org Subject: Re: [SR-Users] Dispatcher Crash when all hosts are invalid
Message body
Hello,
do you have parameter use_default set to 1?
Cheers,
Daniel
On 12/3/10 6:47 AM, Eric Hiller wrote:
Dispatcher crashes everytime guaranteed if there is a single dead host kamailio exits with a core dump (see below). If there are two dead hosts entire kamailio locks up (no core dump). Any ideas on this one? The invalid flag is never marked in the DB btw.
Crashes at ds_select_dst having never reached "COMPLETED FIRST DST LOOKUP"
# ------------------------- request routing logic -------------------
# main routing logic
# ------------------
route{
# initial checks
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
exit;
};
xlog("[$TF] VALID RECV $rm\n $fu ($si:$sp) to $ru\n");
$avp(orig_du) = $du;
if($(fU{s.select,1,-})){
# from a user-formed message
$avp(user) = $(fU{s.select,0,-});
xlog(" USER $avp(user) DETECTED\n");
}
if(pv_isset("$avp(user)") && !ds_is_from_list()){
# from client
# route to client PBX
if(method == "REGISTER"){
route(3);
} else {
route(1);
}
}
if(ds_is_from_list()){
# from client, outbound from pbx
xlog(" IS FROM PBX\n");
if(is_e164($rU)){
xlog(" IS E164");
# all pbx-pbx traffic should be in user format
# since this is pbx-non-pbx send it to gateway
# gateway only takes E164
route(2);
}
if($(rU{s.select,0,-})){
# send directly from pbx to client
route(4);
}
}
if($si == "GATEWAY_IP_ADDRESS"){
# lookup enum
# route to appropriate pbx via DISPATCHER based on user returned
xlog(" CALL FROM GATEWAY\n");
}
}
route[1]{
route(3);
xlog(" ROUTED to $avp(user) PBX\n");
ds_select_dst($avp(user),"7");
xlog(" COMPLETED FIRST DST LOOKUP\n");
if($avp(orig_rd) == $rd){
exec("kamctl dispatcher reload");
ds_select_dst($avp(user),"9");
}
xlog(" host is now $rd; all is $ru || $du\n");
if($avp(orig_du) != $du){
t_on_failure("1");
if(!t_relay()){
xlog(" T_RELAY() FAILED\n");
sl_reply_error();
}
} else {
xlog(" RELOAD STILL YIELDED NOTHING\n");
}
}
route[2]{
xlog(" Sending to gateway...");
#$rd = "GATEWAY";
}
route[3]{
#register
if(!www_authorize("domain.net","subscriber")){
www_challenge("domain.net","0");
return;
} else {
xlog(" AUTHENTICATED $avp(user)\n");
save("location");
return;
}
}
route[4]{
$rU = "2-1";
#$rd = "10.1.40.7";
#$rp = "16314";
lookup("location");
xlog(" ROUTING TO USER $rU\n");
forward();
}
failure_route[1]{
xlog(" FAILED FAILURE_ROUTE[1]\n");
if(t_any_timeout()){
xlog(" MARKING DEAD HOST $du\n");
ds_mark_dst();
xlog(" TIMEOUT!\n");
}
}
0(2934) ERROR: <script>: [Thu Dec 2 20:15:34 2010] VALID RECV REGISTER
sip:3-1@domain.com (10.1.40.7:43899) to sip:domain.com
0(2934) ERROR: <script>: USER 3 DETECTED
0(2934) ERROR: <script>: ROUTED to 3 PBX
0(2934) ERROR: <script>: mark#1
0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.166:5060
0(2934) ERROR: <script>: [Thu Dec 2 20:15:35 2010] VALID RECV REGISTER
sip:3-1@domain.com (10.1.40.7:43899) to sip:domain.com
0(2934) ERROR: <script>: USER 3 DETECTED
0(2934) ERROR: <script>: ROUTED to 3 PBX
0(2934) ERROR: <script>: mark#1
0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.166:5060
1(2935) ERROR: <script>: FAILED FAILURE_ROUTE[1]
1(2935) ERROR: <script>: MARKING DEAD HOST sip:xxx.xxx.xxx.166:5060
1(2935) ERROR: <script>: TIMEOUT!
0(2934) ERROR: <script>: [Thu Dec 2 20:15:50 2010] VALID RECV REGISTER
sip:3-1@domain.com (10.1.40.7:29372) to sip:domain.com
0(2934) ERROR: <script>: USER 3 DETECTED
0(2934) ERROR: <script>: ROUTED to 3 PBX
0(2934) ERROR: <script>: mark#1
0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.165:5060
0(2934) ERROR: <script>: [Thu Dec 2 20:15:50 2010] VALID RECV REGISTER
sip:3-1@domain.com (10.1.40.7:29372) to sip:domain.com
0(2934) ERROR: <script>: USER 3 DETECTED
0(2934) ERROR: <script>: ROUTED to 3 PBX
0(2934) ERROR: <script>: mark#1
0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.165:5060
1(2935) ERROR: <script>: FAILED FAILURE_ROUTE[1]
1(2935) ERROR: <script>: MARKING DEAD HOST sip:xxx.xxx.xxx.165:5060
1(2935) ERROR: <script>: TIMEOUT!
0(2934) ERROR: <script>: [Thu Dec 2 20:15:55 2010] VALID RECV REGISTER
sip:3-1@domain.com (10.1.40.7:29373) to sip:domain.com
0(2934) ERROR: <script>: USER 3 DETECTED
0(2934) ERROR: <script>: ROUTED to 3 PBX
:::::Core file from crash with 1 invalid host:::::
Program terminated with signal 8, Arithmetic exception.
#0 0x0069e92b in ds_select_dst (msg=0x82ffb00, set=2, alg=7, mode=0)
at dispatch.c:1720
1720 i = (i+1)%(idx->nr-1);
Thanks for any help on this one!
-Eric
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla Kamailio (OpenSER) Advanced Training Jan 24-26, 2011, Irvine, CA, USA http://www.asipto.com
I did a fix for it several days ago, not sure you noticed it, since I was mostly unavailable to reply on mailing list. Here is the link: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=0f5e21c6...
If you can try the patch and report if it is working will be great. It is for master, but I will backport to stable banrches as well.
Btw, do you need use_default? I is something quite unmaintained (read untested together with latest additions), so my plan was to remove it since many people were confused by its necessity.
Cheers, Daniel
On 12/3/10 9:54 PM, Eric Hiller wrote:
Yes, I do.
Date: Fri, 3 Dec 2010 10:31:51 +0100 From: miconda@gmail.com To: mrraptor98@hotmail.com CC: sr-users@lists.sip-router.org Subject: Re: [SR-Users] Dispatcher Crash when all hosts are invalid
Hello,
do you have parameter use_default set to 1?
Cheers, Daniel
On 12/3/10 6:47 AM, Eric Hiller wrote:
Dispatcher crashes everytime guaranteed if there is a single dead host kamailio exits with a core dump (see below). If there are two dead hosts entire kamailio locks up (no core dump). Any ideas on this one? The invalid flag is never marked in the DB btw. Crashes at ds_select_dst having never reached "COMPLETED FIRST DST LOOKUP" # ------------------------- request routing logic ------------------- # main routing logic # ------------------ route{ # initial checks if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; xlog("[$TF] VALID RECV $rm\n $fu ($si:$sp) to $ru\n"); $avp(orig_du) = $du; if($(fU{s.select,1,-})){ # from a user-formed message $avp(user) = $(fU{s.select,0,-}); xlog(" USER $avp(user) DETECTED\n"); } if(pv_isset("$avp(user)") && !ds_is_from_list()){ # from client # route to client PBX if(method == "REGISTER"){ route(3); } else { route(1); } } if(ds_is_from_list()){ # from client, outbound from pbx xlog(" IS FROM PBX\n"); if(is_e164($rU)){ xlog(" IS E164"); # all pbx-pbx traffic should be in user format # since this is pbx-non-pbx send it to gateway # gateway only takes E164 route(2); } if($(rU{s.select,0,-})){ # send directly from pbx to client route(4); } } if($si == "GATEWAY_IP_ADDRESS"){ # lookup enum # route to appropriate pbx via DISPATCHER based on user returned xlog(" CALL FROM GATEWAY\n"); } } route[1]{ route(3); xlog(" ROUTED to $avp(user) PBX\n"); ds_select_dst($avp(user),"7"); xlog(" COMPLETED FIRST DST LOOKUP\n"); if($avp(orig_rd) == $rd){ exec("kamctl dispatcher reload"); ds_select_dst($avp(user),"9"); } xlog(" host is now $rd; all is $ru || $du\n"); if($avp(orig_du) != $du){ t_on_failure("1"); if(!t_relay()){ xlog(" T_RELAY() FAILED\n"); sl_reply_error(); } } else { xlog(" RELOAD STILL YIELDED NOTHING\n"); } } route[2]{ xlog(" Sending to gateway..."); #$rd = "GATEWAY"; } route[3]{ #register if(!www_authorize("domain.net","subscriber")){ www_challenge("domain.net","0"); return; } else { xlog(" AUTHENTICATED $avp(user)\n"); save("location"); return; } } route[4]{ $rU = "2-1"; #$rd = "10.1.40.7"; #$rp = "16314"; lookup("location"); xlog(" ROUTING TO USER $rU\n"); forward(); } failure_route[1]{ xlog(" FAILED FAILURE_ROUTE[1]\n"); if(t_any_timeout()){ xlog(" MARKING DEAD HOST $du\n"); ds_mark_dst(); xlog(" TIMEOUT!\n"); } } 0(2934) ERROR: <script>: [Thu Dec 2 20:15:34 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:43899) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX 0(2934) ERROR: <script>: mark#1 0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.166:5060 0(2934) ERROR: <script>: [Thu Dec 2 20:15:35 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:43899) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX 0(2934) ERROR: <script>: mark#1 0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.166:5060 1(2935) ERROR: <script>: FAILED FAILURE_ROUTE[1] 1(2935) ERROR: <script>: MARKING DEAD HOST sip:xxx.xxx.xxx.166:5060 1(2935) ERROR: <script>: TIMEOUT! 0(2934) ERROR: <script>: [Thu Dec 2 20:15:50 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:29372) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX 0(2934) ERROR: <script>: mark#1 0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.165:5060 0(2934) ERROR: <script>: [Thu Dec 2 20:15:50 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:29372) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX 0(2934) ERROR: <script>: mark#1 0(2934) ERROR: <script>: host is now domain.com; all is sip:domain.com || sip:xxx.xxx.xxx.165:5060 1(2935) ERROR: <script>: FAILED FAILURE_ROUTE[1] 1(2935) ERROR: <script>: MARKING DEAD HOST sip:xxx.xxx.xxx.165:5060 1(2935) ERROR: <script>: TIMEOUT! 0(2934) ERROR: <script>: [Thu Dec 2 20:15:55 2010] VALID RECV REGISTER sip:3-1@domain.com (10.1.40.7:29373) to sip:domain.com 0(2934) ERROR: <script>: USER 3 DETECTED 0(2934) ERROR: <script>: ROUTED to 3 PBX :::::Core file from crash with 1 invalid host::::: Program terminated with signal 8, Arithmetic exception. #0 0x0069e92b in ds_select_dst (msg=0x82ffb00, set=2, alg=7, mode=0) at dispatch.c:1720 1720 i = (i+1)%(idx->nr-1); Thanks for any help on this one! -Eric _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users-- Daniel-Constantin Mierla Kamailio (OpenSER) Advanced Training Jan 24-26, 2011, Irvine, CA, USA http://www.asipto.com
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-
Daniel-Constantin Mierla -
Eric Hiller