Good afternoon all,
I have two questions regarding my configs: kamailio.cfghttp://pastebin.com/32PCh8n0 tls.cfghttp://pastebin.com/gnWZeD9e . I am using Kamailio 4.3.5 on Cent OS 7.2 and all relevant pakage up-to-date.
1.) When I try to start Kamailio I get the following warning:
WARNING: tls [tls_mod.c:287]: mod_init(): tls support is disabled (set enable_tls=1 in the config to enable it)
Q: As you can see (line 36) TLS is enabled in config. So what could be the problem?
2.) Lines 324-330 indicate that I want to redirect to 2031 if I'm called at 1. For some reason the SIP-Trace tells me its still building the INVITE with the To-Header to sip:1@PSTN:5060 and the PSTN can't find 1, because no 1 is registered.
Q: Why? (Outbound is set the same way and working perfectly).
Info: I tried already with uac_replace_to and uac_replace_from w/o success.
I would very much appreciate any hints on solving these issues.
Very Respectfully Dimitry Nagorny Trainee
I'd think you'd also need to enable TCP in order to use TLS. You explicitly disable TCP.
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Nagorny, Dimitry Sent: 13 April 2016 14:56 To: sr-users@lists.sip-router.org Subject: [SR-Users] Kamailio TLS and SIP-Package building
Good afternoon all,
I have two questions regarding my configs: kamailio.cfghttp://pastebin.com/32PCh8n0 tls.cfghttp://pastebin.com/gnWZeD9e . I am using Kamailio 4.3.5 on Cent OS 7.2 and all relevant pakage up-to-date.
1.) When I try to start Kamailio I get the following warning:
WARNING: tls [tls_mod.c:287]: mod_init(): tls support is disabled (set enable_tls=1 in the config to enable it)
Q: As you can see (line 36) TLS is enabled in config. So what could be the problem?
2.) Lines 324-330 indicate that I want to redirect to 2031 if I'm called at 1. For some reason the SIP-Trace tells me its still building the INVITE with the To-Header to sip:1@PSTN:5060 and the PSTN can't find 1, because no 1 is registered.
Q: Why? (Outbound is set the same way and working perfectly).
Info: I tried already with uac_replace_to and uac_replace_from w/o success.
I would very much appreciate any hints on solving these issues.
Very Respectfully Dimitry Nagorny Trainee
Thanks Phil that was the error...
Anybody an idea about Question 2.)?
Best Regards Dimitry Nagorny Trainee
Von: sr-users [mailto:sr-users-bounces@lists.sip-router.org] Im Auftrag von Phil Lavin Gesendet: Mittwoch, 13. April 2016 16:07 An: Kamailio (SER) - Users Mailing List sr-users@lists.sip-router.org Betreff: Re: [SR-Users] Kamailio TLS and SIP-Package building
I'd think you'd also need to enable TCP in order to use TLS. You explicitly disable TCP.
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Nagorny, Dimitry Sent: 13 April 2016 14:56 To: sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org Subject: [SR-Users] Kamailio TLS and SIP-Package building
Good afternoon all,
I have two questions regarding my configs: kamailio.cfghttp://pastebin.com/32PCh8n0 tls.cfghttp://pastebin.com/gnWZeD9e . I am using Kamailio 4.3.5 on Cent OS 7.2 and all relevant pakage up-to-date.
1.) When I try to start Kamailio I get the following warning:
WARNING: tls [tls_mod.c:287]: mod_init(): tls support is disabled (set enable_tls=1 in the config to enable it)
Q: As you can see (line 36) TLS is enabled in config. So what could be the problem?
2.) Lines 324-330 indicate that I want to redirect to 2031 if I'm called at 1. For some reason the SIP-Trace tells me its still building the INVITE with the To-Header to sip:1@PSTN:5060 and the PSTN can't find 1, because no 1 is registered.
Q: Why? (Outbound is set the same way and working perfectly).
Info: I tried already with uac_replace_to and uac_replace_from w/o success.
I would very much appreciate any hints on solving these issues.
Very Respectfully Dimitry Nagorny Trainee
-
Nagorny, Dimitry -
Phil Lavin