Hello again,

catching up the thread, sorry for delay, busy here ...

On 06/09/08 18:03, Gaoqiang Qian wrote:

Hi, Thank you very much for replying, yes the handshake between sip and xmpp server was established. And I got some logs when I send a "subsribe" message from gqian@ovi.com(on Pidgin XMPP client) to address tcc11*sip.rcs.demo@rcs.allatum.wipsl.com as below:

Jun 9 17:54:46 ims /home/openser/openser1.2.3/sbin/openser[18844]: xmpp: server read [<presence from='gaqian@ovi.com' to='tcc11*sip.rcs.demo@rcs.allatum.wipsl.com' type='subscribe'><status>I would like to add you to my roster.</status></presence>] Jun 9 17:54:46 ims /home/openser/openser1.2.3/sbin/openser[18844]: xmpp: stream callback: 1: presence Jun 9 17:56:06 ims /home/openser/openser1.2.3/sbin/openser[18821]: PRESENCE: msg_watchers_clean:cleaning pending subscriptions Jun 9 17:56:06 ims /home/openser/openser1.2.3/sbin/openser[18821]: PRESENCE: msg_active_watchers_clean:cleaning expired watcher information

I would need the log messages from the moment openser started, to be able to identify the workers for xmpp side and what they did there.

But nothing more and on the sip client X-lite side, I didn't get any message.

Can you watch the SIP traffic with ngrep/whireshark and see if messages are sent on the net?

So now I still have two questions:

1. Is Having openser 1.2.3 module "mysql , presence, xmpp" enough to

setup the sip gateway to a remote ejabber server? Or should I try "mysql, presence, pua, pua_xmpp" modules?

mysql, pua, pua_xmpp, xmpp, presence, presence_xml are required.

2. What sip and xmpp client should be used to test?

For sip, X-Lite/Eyebeam/Bria are a good variant, or Twinkle for Linux, for Jabber, most of the clients out there have presence implemented, including pidgin.

Would you mind moving on the devel@lists.openser.org and merge in the other threads you are involved in, about same topic? Although it is about stable, I feel like xmpp-gw is still under development, as the IETF keeps updating specs about interoperability.

Thanks, Daniel

Thanks a lot in advance.

Br Gaoqiang Quoting Daniel-Constantin Mierla miconda@gmail.com:

...

Hello,

can you grab the sip trace and xmpp trace on openser server to see if the messages reaches your sip server? Also, run openser with higher debug level so you get hints in syslog (e.g., debug=5).

Cheers, Daniel

On 06/05/08 16:22, Gaoqiang Qian wrote:

...

Hi all, I have setup and configured my Openser with mysql, presence, xmpp, pua modules. The server was startup fine. I setup the xmpp module as the xmpp gateway as component module cuase I have another jabber server running remotely.

The configuration of servers parameters is as below:

#---------------openser.cfg------------------ listen=udp:193.210.148.243:5060 alias=xmpp.rcs.demo modparam("xmpp", "domain_separator", "*") modparam("xmpp", "gateway_domain", "xmpp.rcs.demo")//added to etc/hosts file modparam("xmpp", "xmpp_domain", "rcs.allatum.wipsl.com")//added to etc/hosts file modparam("xmpp", "xmpp_host", "allatum.wipsl.com") modparam("xmpp", "backend", "component") #--------------------------------------------

Now I want to test the interoperability of XMPP gateway of openser, so I use sip client (X-lite) and a XMPP client. I use sip and xmpp account to successfully register in the sip and XMPP client: sip account: sip:test@193.210.148.244 xmpp acount: gqian@allatum.wipsl.com

But what destination address should I use to add to both of the client to test the interoperability? I failed at below address added according to the xmpp module document.

At SIP client I add Contact address: sip:gqian*allatum.wipsl.com@xmpp.rcs.demo

At XMPP client: test*193.210.148.244@rcs.allatum.wipsl.com

Does anyone has this testing experience and give me some hints how should I add the contacts in both client to let them talk to each other? I am now really heading the wall.

Thanks a lot in advance.

BR, Gaoqiang

-- http://www.asipto.com