23 Mar
2007
23 Mar
'07
4:15 p.m.
Hello,
On 03/23/07 13:59, Asterisk Expert wrote:
Hello Daniel,
I just figured out. I forgot to set db url for avpops :))
But in this case openser should not start and give error. not?
does now, thanks for
reporting (just committed on svn).
Instead it started and when executed mysql query, it
crashed.
I have one more query. I read that if we set onreply_avp_mode=1 in tm
module, we can access avp variables in reply routes. I have done the
same. I set some avp value in request route and update mysql db based
on that value in reply route but I'm getting null :(
What do you think will be the problem?
I will check it.
Cheers,
Daniel
On 3/23/07, *Daniel-Constantin Mierla* <daniel(a)voice-system.ro
<mailto:daniel@voice-system.ro> > wrote:
Hello,
i tried to reproduce, but I got no same result. If the avp is
null, the
returned values is false in comparisons.
Could you send log messages and backtrace?
Cheers,
Daniel
On 03/23/07 10:37, Asterisk Expert wrote:
Hello,
I'm using openser 1.2.0 . I have following section in my
openser.cfg.
avp_db_query("SELECT active, accountcode FROM openser_ip_auth WHERE
ip_addr='$src_ip'","$avp(s:active);$avp(s:accountcode)");
xlog("L_INFO", "\n$avp(s:active):::$avp(s:accountcode)\n");
if (!avp_check("$avp(s:active)","eq/1/I"))
{
xlog("L_ERR", "$si [$Tf]: $rm $fu -> $ru: REGISTER: bad
credentials, ask for credentials\n");
#authentication failed
www_challenge("", "0");
setflag(1);
return;
}
Basically I'm doing IP based authentication. I have used the similar
method in version 1.1 but openser 1.2.0 crashes if the query in
avp_db_query returns no rows which keeps those two avp variables
null.
Is this a bug or I'm doing something wrong?
I also tried "==" operator for comparison but it crashes whenever it
is trying to access one of those two variables.
--
Regards
Ruchir Brahmbhatt
Ecosmob Technologies
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org <mailto:Users@openser.org>
http://openser.org/cgi-bin/mailman/listinfo/users
--
Regards
Ruchir Brahmbhatt 
23 Mar
23 Mar
4:32 p.m.
New subject: [Users] OpenSER crashes when attempting to use null avp variable
Hi Daniel,
Maybe there should be some rules posted on the openser website about
mailing list usage, like "hit the reply to all button, not the just
the reply" ....
just my 2c
Regards,
Ovidiu Sas
On 3/23/07, Daniel-Constantin Mierla <daniel(a)voice-system.ro> wrote:
Hello,
On 03/23/07 13:59, Asterisk Expert wrote:
Hello Daniel,
I just figured out. I forgot to set db url for avpops :))
But in this case openser should not start and give error. not?
does now, thanks
for reporting (just committed on svn).
Instead it started and when executed mysql query,
it crashed.
I have one more query. I read that if we set onreply_avp_mode=1 in tm
module, we can access avp variables in reply routes. I have done the
same. I set some avp value in request route and update mysql db based
on that value in reply route but I'm getting null :(
What do you think will be the problem?
I will check it.
Cheers,
Daniel
On 3/23/07, *Daniel-Constantin Mierla* <daniel(a)voice-system.ro
<mailto:daniel@voice-system.ro> > wrote:
Hello,
i tried to reproduce, but I got no same result. If the avp is
null, the
returned values is false in comparisons.
Could you send log messages and backtrace?
Cheers,
Daniel
On 03/23/07 10:37, Asterisk Expert wrote:
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
Hello,
I'm using openser 1.2.0 . I have following section in my
openser.cfg.
avp_db_query("SELECT active, accountcode FROM openser_ip_auth WHERE
ip_addr='$src_ip'","$avp(s:active);$avp(s:accountcode)");
xlog("L_INFO", "\n$avp(s:active):::$avp(s:accountcode)\n");
if (!avp_check("$avp(s:active)","eq/1/I"))
{
xlog("L_ERR", "$si [$Tf]: $rm $fu -> $ru: REGISTER: bad
credentials, ask for credentials\n");
#authentication failed
www_challenge("", "0");
setflag(1);
return;
}
Basically I'm doing IP based authentication. I have used the similar
method in version 1.1 but openser 1.2.0 crashes if the query in
avp_db_query returns no rows which keeps those two avp variables
null.
Is this a bug or I'm doing something wrong?
I also tried "==" operator for comparison but it crashes whenever it
is trying to access one of those two variables.
--
Regards
Ruchir Brahmbhatt
Ecosmob Technologies
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org <mailto:Users@openser.org>
http://openser.org/cgi-bin/mailman/listinfo/users
--
Regards
Ruchir Brahmbhatt
4:47 p.m.
New subject: [Users] OpenSER crashes when attempting to use null avp variable
Hello Ovidiu,
On 03/23/07 17:32, Ovidiu Sas wrote:
Hi Daniel,
Maybe there should be some rules posted on the openser website about
mailing list usage, like "hit the reply to all button, not the just
the reply" ....
should be "keep CC-ing to mailing list", I think
this must be mandatory.
I think there is an option to mailman to set the reply-to address. But I
guess then will be troubles with reply all, since will get only to
reply-to address -- at least will get back to mailing list.
Cheers,
Daniel
just my 2c
Regards,
Ovidiu Sas
On 3/23/07, Daniel-Constantin Mierla <daniel(a)voice-system.ro> wrote:
Hello,
On 03/23/07 13:59, Asterisk Expert wrote:
whenever it
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
Hello Daniel,
I just figured out. I forgot to set db url for avpops :))
But in this case openser should not start and give error. not?
does now, thanks
for reporting (just committed on svn).
Instead it started and when executed mysql query,
it crashed.
I have one more query. I read that if we set onreply_avp_mode=1 in tm
module, we can access avp variables in reply routes. I have done the
same. I set some avp value in request route and update mysql db based
on that value in reply route but I'm getting null :(
What do you think will be the problem?
I will check it.
Cheers,
Daniel
On 3/23/07, *Daniel-Constantin Mierla* <daniel(a)voice-system.ro
<mailto:daniel@voice-system.ro> > wrote:
Hello,
i tried to reproduce, but I got no same result. If the avp is
null, the
returned values is false in comparisons.
Could you send log messages and backtrace?
Cheers,
Daniel
On 03/23/07 10:37, Asterisk Expert wrote:
WHERE
Hello,
I'm using openser 1.2.0 . I have following section in my
openser.cfg.
>
> avp_db_query("SELECT active, accountcode FROM openser_ip_auth >
ip_addr='$src_ip'","$avp(s:active);$avp(s:accountcode)");
> xlog("L_INFO",
"\n$avp(s:active):::$avp(s:accountcode)\n");
> if
(!avp_check("$avp(s:active)","eq/1/I"))
> {
> xlog("L_ERR", "$si [$Tf]: $rm $fu -> $ru:
REGISTER: bad
> credentials, ask for
credentials\n");
>
> #authentication failed
> www_challenge("", "0");
> setflag(1);
> return;
> }
> Basically I'm doing IP based authentication. I have used the
similar
method in
version 1.1 but openser 1.2.0 crashes if the query in
avp_db_query returns no rows which keeps those two avp variables
null.
> Is this a bug or I'm doing something wrong?
> I also tried "==" operator for comparison but it crashes is trying
to access one of those two variables.
--
Regards
Ruchir Brahmbhatt
Ecosmob Technologies
_______________________________________________
Users mailing list
Users(a)openser.org <mailto:Users@openser.org>
http://openser.org/cgi-bin/mailman/listinfo/users
--
Regards
Ruchir Brahmbhatt
6463
days inactive
6463
days old
2 comments
2 participants
participants (2)
-
Daniel-Constantin Mierla -
Ovidiu Sas