21 Mar
2005
21 Mar
'05
6:48 p.m.
Hi all !
I use CDRTool for accounting with radiusclient 0.4.3 librairy and freeradius
1.0.2.
For Start and Stop status code, I have no problem, I have the CDRs on MySQL
Database.
But when I want to have MISSED CALL, I have an error on freeradius !
Error :
Mon Mar 21 17:10:53 2005 : Error: rlm_radutmp: NAS localhost port 5060
unknown packet type 15)
Mon Mar 21 17:10:53 2005 : Info: rlm_sql (sql): Unsupported Acct-Status-Type
= 15
Does someone know how to solve this problem??
Is it in the SQL.CONF ??
Thanks a lot
Vos Solutions Voix-Data !
Nicolas Ruiz
Service Technique
Ligne directe : + 33 (0) 1 56 38 39 71
Fax :+ 33 (0) 1 47 24 74 77
nruiz(a)vivaction.com
Immeuble Plein Ouest
177 av. Georges Clemenceau
92024 Nanterre - France
Tel : 0 811 02 6000
www.vivaction.com
____________________________________________________________________________
____________________________________________
This e-mail and the information it contains are confidential and legally
protected by law. Only access by the intended recipient is authorized.
Review, distribution,reproduction, publication or other use of this e-mail
is prohibited.
Cet e-mail et les informations qu'il contient sont confidentiels et protégés
par la loi. L'accès à ce message n'est autorisé qu'au destinataire de
celui-ci. Toute modification,distribution, reproduction, publication, ou
autre utilisation de cet e-mail est formellement interdite.
22 Mar
22 Mar
7:26 a.m.
Can you send me the changes that needs to be done in global.inc to get
CDRTOLL working .. I tried all combinations but was unsuccessful.
Thanks
Deepak Singhal
_____
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On
Behalf Of Nicolas Ruiz
Sent: Monday, March 21, 2005 10:19 PM
To: serusers(a)lists.iptel.org
Subject: [Serusers] SER 0.8.14 + Radius ACCOUNTING problems
Hi all !
I use CDRTool for accounting with radiusclient 0.4.3 librairy and freeradius
1.0.2.
For Start and Stop status code, I have no problem, I have the CDRs on MySQL
Database.
But when I want to have MISSED CALL, I have an error on freeradius !
Error :
Mon Mar 21 17:10:53 2005 : Error: rlm_radutmp: NAS localhost port 5060
unknown packet type 15)
Mon Mar 21 17:10:53 2005 : Info: rlm_sql (sql): Unsupported Acct-Status-Type
= 15
Does someone know how to solve this problem??
Is it in the SQL.CONF ??
Thanks a lot
Vos Solutions Voix-Data !
Nicolas Ruiz
Service Technique
Ligne directe : + 33 (0) 1 56 38 39 71
Fax :+ 33 (0) 1 47 24 74 77
<mailto:nruiz@vivaction.com> nruiz(a)vivaction.com
Immeuble Plein Ouest
177 av. Georges Clemenceau
92024 Nanterre - France
Tel : 0 811 02 6000
<http://www.vivaction.com/> www.vivaction.com
____________________________________________________________________________
____________________________________________
This e-mail and the information it contains are confidential and legally
protected by law. Only access by the intended recipient is authorized.
Review, distribution,reproduction, publication or other use of this e-mail
is prohibited.
Cet e-mail et les informations qu'il contient sont confidentiels et protégés
par la loi. L'accès à ce message n'est autorisé qu'au destinataire de
celui-ci. Toute modification,distribution, reproduction, publication, ou
autre utilisation de cet e-mail est formellement interdite.
8:22 a.m.
New subject: [Serusers] prefix command
Hi all,
I have write a command as
if (uri=~"^sip:0") {
strip(1);
prefix("02134");
forward(xx.xx.xx.xx);
break;
}
I find it only prefix the invite URI but the to field is not add prefix. The
peer PSTN gateway need both URI and to field has the same value. how to add
a prefix in to field?
Jiangzhou
Best Regards
-------------------------------------------------
Phone: 021-54591867
Email: zjiang(a)sipod.com
WWW : www.sipod.com
------------------------------------------------
8:56 p.m.
New subject: [Serusers] prefix command
Hi Jiang,
prefix() operates only on RURI. You shouldn't change TO hdr since you
may break transaction matching.
Note that according to RFC 3261 the SIP routing is never done based on
TO uri, so your gateway must look only to RURI and not to TO header.
Better report the bug to the GW vendor.
Best regards,
Marian
Jiang zhou wrote:
Hi all,
I have write a command as
if (uri=~"^sip:0") {
strip(1);
prefix("02134");
forward(xx.xx.xx.xx);
break;
}
I find it only prefix the invite URI but the to field is not add prefix.
The peer PSTN gateway need both URI and to field has the same value. how
to add a prefix in to field?
Jiangzhou
Best Regards
-------------------------------------------------
Phone: 021-54591867
Email: zjiang(a)sipod.com
WWW : www.sipod.com
------------------------------------------------
------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
Voice System
http://www.voice-system.ro
23 Mar
23 Mar
7:15 a.m.
New subject: [Serusers] record-route and pstn gateway problem.
Hi,all
I have a record route problem:
sip client===>ser====>(pstn)gateway
invite: client---->ser---->gw
ring and 200ok : gw--->ser--->client
ack : client--------------->gw
I use forward command forward pstn call to gateway.
if (uri=~"^sip:9817") {
rewritehost("xxx.xxx.xxx.xxx");
forward(xxx.xxx.xxx.xxx,5060);
break;
}
There is no record-route field in the 200ok packet. So client forward to gw
directly.
But when sip client call each other ser insert record-route field. Can
someone tell me
how to config forward command with record-route supported?
Jiangzhou
Best Regards
1:59 p.m.
New subject: [Serusers] record-route and pstn gateway problem.
This should fix that:
route {
# sanity checks
if (method!="REGISTER") record_route();
# all other processing
}
Regards,
Paul
On Wed, 23 Mar 2005 13:15:40 +0800, Jiang zhou <zjiang(a)sipod.com> wrote:
Hi,all
I have a record route problem:
sip client===>ser====>(pstn)gateway
invite: client---->ser---->gw
ring and 200ok : gw--->ser--->client
ack : client--------------->gw
I use forward command forward pstn call to gateway.
if (uri=~"^sip:9817") {
rewritehost("xxx.xxx.xxx.xxx");
forward(xxx.xxx.xxx.xxx,5060);
break;
}
There is no record-route field in the 200ok packet. So client forward to gw
directly.
But when sip client call each other ser insert record-route field. Can
someone tell me
how to config forward command with record-route supported?
Jiangzhou
Best Regards
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
7215
days inactive
7217
days old
5 comments
5 participants
participants (5)
-
Deepak Singhal -
Java Rockx -
Jiang zhou -
Marian Dumitru -
Nicolas Ruiz