15 Aug
2014
15 Aug
'14
5:29 a.m.
hello everybody,
I would like loop in kamailio.cfg because I want register soft phone on all asterisk
system so I have this configuration
but also if I want add another asterisk system
my Kamailio.cfg
#!define WITH_ASTERISK
#!define WITH_CLUST_AST
#!ifdef WITH_ASTERISK
asterisk.bindip = "asterisk.home.fr" desc "Asterisk IP Address"
asterisk.bindport = "5080" desc "Asterisk Port"
kamailio.bindip = « kamailio.home.fr" desc "kamailio IP Address"
kamailio.bindport = "5060" desc "Kamailio Port"
#!endif
#!ifdef WITH_CLUST_AST
#!define HOST 2
asterisk1.bindip = "192.168.0.10" desc « Asterisk - 1 - IP Address"
asterisk1.bindport = "5080" desc "Asterisk Port"
asterisk2.bindip = "192.168.0.20" desc « Asterisk - 2 - IP Address"
asterisk2.bindport = "5080" desc "Asterisk Port"
#!endif
# Forward REGISTER to Asterisk
route[REGFWD] {
if(!is_method("REGISTER"))
{
return;
}
$var(rip) = $sel(cfg_get.asterisk1.bindip);
$uac_req(method)="REGISTER";
$uac_req(ruri)="sip:" + $var(rip) + ":" +
$sel(cfg_get.asterisk1.bindport);
$uac_req(furi)="sip:" + $au + "@" + $var(rip);
$uac_req(turi)="sip:" + $au + "@" + $var(rip);
$uac_req(hdrs)="Contact: <sip:" + $au + "@"
+ $sel(cfg_get.kamailio.bindip)
+ ":" + $sel(cfg_get.kamailio.bindport) +
">\r\n";
if($sel(contact.expires) != $null)
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
$sel(contact.expires) + "\r\n";
else
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " + $hdr(Expires) +
"\r\n";
uac_req_send();
$var(rip) = $sel(cfg_get.asterisk2.bindip);
$uac_req(method)="REGISTER";
$uac_req(ruri)="sip:" + $var(rip) + ":" +
$sel(cfg_get.asterisk2.bindport);
$uac_req(furi)="sip:" + $au + "@" + $var(rip);
$uac_req(turi)="sip:" + $au + "@" + $var(rip);
$uac_req(hdrs)="Contact: <sip:" + $au + "@"
+ $sel(cfg_get.kamailio.bindip)
+ ":" + $sel(cfg_get.kamailio.bindport) +
">\r\n";
if($sel(contact.expires) != $null)
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
$sel(contact.expires) + "\r\n";
else
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " + $hdr(Expires) +
"\r\n";
uac_req_send();
}
#!endif
thank you for your help
anthony
5 Sep
5 Sep
4:52 a.m.
Hello,
using global custom parameters is a bit complex, because they cannot be
referred by a dynamic name.
Creating a loop is not possible, you will have to put all the options
one after the other, using an if condition to see if it is set, like:
if($sel(cfg_get.asterisk1.bindip)!=$null &&
$sel(cfg_get.asterisk1.bindip)!="") {
$var(astip) = $sel(cfg_get.asterisk1.bindip);
if($sel(cfg_get.asterisk1.bindport)!=$null &&
$sel(cfg_get.asterisk1.bindport)!="") {
$var(astport) = $sel(cfg_get.asterisk1.bindport);
} else {
$var(astport) = 5060;
}
route(REGFWD);
}
Then do the same for asterisk2, ...
The route[REGFWD] has to be updated to use $var(astip) and $var(astport)
instead of using $sel(...).
Perhaps i better to use hash table (because you can get the key dynamic)
or global avps in this case.
For example with a hash table named ast:
$var(i) = 1;
while($sht(ast=>ip$var(i))!= $null) {
$var(i) = $var(i) + 1;
$var(astip) = $sht(ast=>ip$var(i));
if($sht(ast=>port$var(i))!=$null) {
$var(astport) = $sht(ast=>port$var(i));
} else {
$var(astport) = 5060;
}
route(REGFWD);
}
In the hash table 'ast' you need to add pairs like: (ip1, "1.2.3.4"),
(port1, "5060"), (ip2, "2.2.3.4"), (port2, "5060"), ...
More about hash tables in config in the readme of htable module.
Cheers,
Daniel
On 15/08/14 11:29, ANTHONY HESNAUX wrote:
hello everybody,
I would like loop in kamailio.cfg because I want register soft phone
on all asterisk system so I have this configuration
but also if I want add another asterisk system
my Kamailio.cfg
#!define WITH_ASTERISK
#!define WITH_CLUST_AST
#!ifdef WITH_ASTERISK
asterisk.bindip = "asterisk.home.fr <http://asterisk.home.fr>" desc
"Asterisk IP Address"
asterisk.bindport = "5080" desc "Asterisk Port"
kamailio.bindip = « kamailio.home.fr <http://kamailio.home.fr>" desc
"kamailio IP Address"
kamailio.bindport = "5060" desc "Kamailio Port"
#!endif
#!ifdef WITH_CLUST_AST
#!define HOST 2
asterisk1.bindip = "192.168.0.10" desc « Asterisk - 1 - IP Address"
asterisk1.bindport = "5080" desc "Asterisk Port"
asterisk2.bindip = "192.168.0.20" desc « Asterisk - 2 - IP Address"
asterisk2.bindport = "5080" desc "Asterisk Port"
#!endif
# Forward REGISTER to Asterisk
route[REGFWD] {
if(!is_method("REGISTER"))
{
return;
}
$var(rip) = $sel(cfg_get.*asterisk1.bindip*);
$uac_req(method)="REGISTER";
$uac_req(ruri)="sip:" + $var(rip) + ":" +
$sel(cfg_get.*asterisk1.bindport*);
$uac_req(furi)="sip:" + $au + "@" + $var(rip);
$uac_req(turi)="sip:" + $au + "@" + $var(rip);
$uac_req(hdrs)="Contact: <sip:" + $au + "@"
+ $sel(cfg_get.kamailio.bindip)
+ ":" + $sel(cfg_get.kamailio.bindport) +
">\r\n";
if($sel(contact.expires) != $null)
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
$sel(contact.expires) + "\r\n";
else
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
$hdr(Expires) + "\r\n";
uac_req_send();
$var(rip) = $sel(cfg_get.*asterisk2.bindip*);
$uac_req(method)="REGISTER";
$uac_req(ruri)="sip:" + $var(rip) + ":" +
$sel(cfg_get.*asterisk2*.bindport);
$uac_req(furi)="sip:" + $au + "@" + $var(rip);
$uac_req(turi)="sip:" + $au + "@" + $var(rip);
$uac_req(hdrs)="Contact: <sip:" + $au + "@"
+ $sel(cfg_get.kamailio.bindip)
+ ":" + $sel(cfg_get.kamailio.bindport) +
">\r\n";
if($sel(contact.expires) != $null)
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
$sel(contact.expires) + "\r\n";
else
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " +
$hdr(Expires) + "\r\n";
uac_req_send();
}
#!endif
thank you for your help
anthony
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Next Kamailio Advanced Trainings 2014 - http://www.asipto.com
Sep 22-25, Berlin, Germany
3765
days inactive
3786
days old
1 comments
2 participants
participants (2)
-
ANTHONY HESNAUX -
Daniel-Constantin Mierla