Hi, I am struggling with kamailio and radius configuration to achieve proper Call duration notification. Here is what i have: - kamailio 1.6 - radiusclient-ng - freeradius on different server Kamailio configuration has following radius-extra: modparam("acc", "radius_extra", "User-Name=$Au; \ Calling-Station-Id=$from; \ Called-Station-Id=$to; \ Sip-Translated-Request-URI=$ruri; \ Sip-RPid=$avp(s:rpid); \ Source-IP=$si; \ Source-Port=$sp; \ Canonical-URI=$avp(s:can_uri); \ Billing-Party=$avp(s:billing_party); \ Divert-Reason=$avp(s:divert_reason); \ X-RTP-Stat=$hdr(X-RTP-Stat); \ Contact=$hdr(contact); \ Event=$hdr(event); \ SIP-Proxy-IP=$avp(s:sip_proxy_ip); \ ENUM-TLD=$avp(s:enum_tld)") which produce following radius data START and STOP: Mon Nov 23 16:26:38 2009 Acct-Status-Type = Start Service-Type = IAPP-Register Sip-Response-Code = 200 Sip-Method = Invite Event-Timestamp = 1258990835 Sip-From-Tag = "c3716c01" Sip-To-Tag = "11544D08-C80" Acct-Session-Id = "Nzg5MmZlMDNkMGUwODgwN2ZkZWZkMmQ3NzYwYzNkNWY." User-Name = "Mac(a)xx.yy.zz.vv" Calling-Station-Id = "sip:Mac@xx.yy.zz.vv" Called-Station-Id = "sip:123456789@xx.yy.zz.vv" Sip-Translated-Request-URI = "sip:123456789@aa.bb.cc.dd" X-Ascend-Send-Secret = 0x3135372e32352e3139322e32 X-Ascend-Receive-Secret = 0x3a7c X-Ascend-Netware-timeout = 0x3c7369703a4d616369656a403139322e3136382e332e3132353a36323034323e NAS-Port = 5060 Acct-Delay-Time = 0 NAS-IP-Address = xx.yy.zz.vv Client-IP-Address = xx.yy.zz.vv Acct-Unique-Session-Id = "a62f94528d34acfe" Timestamp = 1258989998 Mon Nov 23 16:26:38 2009 Acct-Status-Type = Stop Service-Type = IAPP-Register Sip-Response-Code = 200 Sip-Method = 8 Event-Timestamp = 1258990836 Sip-From-Tag = "c3716c01" Sip-To-Tag = "11544D08-C80" Acct-Session-Id = "Nzg5MmZlMDNkMGUwODgwN2ZkZWZkMmQ3NzYwYzNkNWY." User-Name = "Mac(a)xx.yy.zz.vv" Calling-Station-Id = "sip:Mac@xx.yy.zz.vv" Called-Station-Id = "sip:123456789@xx.yy.zz.vv" Sip-Translated-Request-URI = "sip:123456789@aa.bb.cc.dd:5060" X-Ascend-Send-Secret = 0x3135372e32352e3139322e32 X-Ascend-Receive-Secret = 0x3a7c X-Ascend-Netware-timeout = 0x3c7369703a4d616369656a403139322e3136382e332e3132353a36323034323e NAS-Port = 5060 Acct-Delay-Time = 0 NAS-IP-Address = xx.yy.zz.vv Client-IP-Address = xx.yy.zz.vv Acct-Unique-Session-Id = "a62f94528d34acfe" Timestamp = 1258989998 The task is to upload all stored radius messages into MYSQL with proper call duration info. I've ran through many posts and found a few way-outs: 1) to use AVPOPS module: modparam("acc", "radius_extra", "Acct-Session-Time=$avp(call_length)") modparam( "avpops", "avp_aliases", "start_timestamp=i:100") modparam( "avpops", "avp_aliases", "end_timestamp=i:101") modparam( "avpops", "avp_aliases", "call_length=i:102") avp_op("$avp(end_timestamp)","sub/$avp(start_timestamp)"); avp_op("$avp(end_timestamp)/$avp(call_length)","sub/$avp(start_timestamp)"); 2) to use DIALOG module modparam("acc", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("acc", "radius_flag", 1) modparam("acc", "radius_extra", "Acct-Session-Time=$avp(i:921)") if (is_method("BYE")) { xlog("L_INFO", "dialog_status:$DLG_status duration=$DLG_lifetime\n"); $avp(i:921) = $DLG_lifetime{s.int}; } else { $avp(i:921) = 0; } setflag(1); 3) to use a script or db triggers(after STOP). Could you advice which one is better/work properly. Maybe there are any other configuration i could use. Thanks in advance, Maciej _______________________________________________ Kamailio (OpenSER) - Users mailing list Users(a)lists.kamailio.org http://lists.kamailio.org/cgi-bin/mailman/listinfo/users http://lists.openser-project.org/cgi-bin/mailman/listinfo/users