Hi.

I am trying to compile the SER on a Sun Fire V100 and have the following assemble error.

I am wondering if someone could point me to the right direction.

Thanks

JC

bash: makeall: command not found ipvoiss1:/usr/joseph/JC/ser/ser-0.8.12$ make all Makefile.defs:473: Old gcc detected (2.9x), use gcc >= 3.1 for better results Makefile:238: warning: overriding commands for target `/usr/local' Makefile:235: warning: ignoring old commands for target `/usr/local' Makefile:241: warning: overriding commands for target `/usr/local' Makefile:238: warning: ignoring old commands for target `/usr/local' Makefile:245: warning: overriding commands for target `/usr/local' Makefile:241: warning: ignoring old commands for target `/usr/local' Makefile:248: warning: overriding commands for target `/usr/local' Makefile:245: warning: ignoring old commands for target `/usr/local' Makefile:251: warning: overriding commands for target `/usr/local' Makefile:248: warning: ignoring old commands for target `/usr/local' gcc -g -O9 -funroll-loops -Wall -mv8 -DNAME='"ser"' -DVERSION='"0.8.12"' -DARCH='"sparc64"' -DOS='"solaris"' -DCOMPILER='"gcc 2.95"' -D__CPU_sparc64 -D__OS_solaris -DCFG_DIR='"/usr/local /etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_TCP -DDISABLE_NAGLE -DF_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETIPNODEBYNAME -DHAVE_SYS_SOCKIO_H -DHAVE_SCHED_YIELD -c main.c -o main.o /usr/ccs/bin/as: "/var/tmp/ccgv1YCz.s", line 1375: error: cannot use v8plus instructions in a non-v8plus target binary /usr/ccs/bin/as: "/var/tmp/ccgv1YCz.s", line 1401: error: cannot use v8plus instructions in a non-v8plus target binary /usr/ccs/bin/as: "/var/tmp/ccgv1YCz.s", line 10948: error: cannot use v8plus instructions in a non-v8plus target binary /usr/ccs/bin/as: "/var/tmp/ccgv1YCz.s", line 10977: error: cannot use v8plus instructions in a non-v8plus target binary make: *** [main.o] Error 1 ipvoiss1:/usr/joseph/JC/ser/ser-0.8.12$

-----Original Message----- From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Jeremy George Sent: June 24, 2004 4:23 PM To: gc Cc: serusers@lists.iptel.org Subject: Re: [Serusers] Using AS5300 for SER

Where 10.1.1.1 is the address of the SER host and 10.2.1.1 is the address of the AS5300.

access-list 101 permit ip host 10.1.1.1 host 10.2.1.1 access-list 101 deny tcp any host 10.2.1.1 eq 5060 access-list 101 deny udp any host 10.2.1.1 eq 5060 access-list 101 permit ip any any

- Jeremy

On Thu, 24 Jun 2004, gc wrote:

Date: Thu, 24 Jun 2004 16:16:45 -0400 From: gc garych@unidial.com To: serusers@lists.iptel.org Subject: [Serusers] Using AS5300 for SER

I am using AS5300 as PSTN Gateway for SER. I'd like to make the AS5300 only accept sip call forward by ser. Does anybody know how to setup AS5300 for this?

Gary