actually this is a subroute..

route[3] { if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | (uri=~"^sip:1515@")) { rewritehost("ip"); forward(uri:host, uri:port); break; };

.. called by he main route

if ((uri=~"^sip:1200[0-9]+@") && (!uri=~"^sip:1200200@") && (!uri=~"^sip:1200100@") ) { rewritehost("ip"); forward(uri:host, uri:port); break;

} else { route(3); break;

..can I do like this?? call a subroute [4] from e subroute [3]?

if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | (uri=~"^sip:1515@")) { route(4); } route[4] { rewritehostport("192.168.0.1:5060"); t_on_failure("1"); t_relay(); }

failure_route[4] { rewritehostport("192.168.0.2:5060"); append_branch(); t_relay(); }

Giuseppe

----- Original Message ----- From: "Tobias Lindgren" tobias.lindgren@ip-only.se To: "Giuseppe Parlato" gparlato@tnet.it Cc: serusers@lists.iptel.org Sent: Tuesday, May 23, 2006 9:56 AM Subject: Re: [Serusers] backup route

Hello,

You can use the "route[]" and "failure_route[]" functions in ser.cfg.

A short example: if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | (uri=~"^sip:1515@")) { route(1); } route[1] { rewritehostport("192.168.0.1:5060"); t_on_failure("1"); t_relay(); }

failure_route[1] { rewritehostport("192.168.0.2:5060"); append_branch(); t_relay(); }

This above would relay on that you have the "tm.so" module loaded. Also, the tm-module has some parameters for timeouts and stuff (such as fr_timer) which you should laborate with.

Good luck!

Br, Tobias

Giuseppe Parlato said the following on 2006-05-22 18:04:

...

When calling some numbers I have to forward calls to a router cisco (then it wil forward calls out through isdn) or to a backup router cisco if the first one is busy. The route to primary cisco router works but I don't know how to implement the backup route in ser.cfg ? how can I configure a backup route in sip server? I hope someone can answer me soon, I'm in trouble :|

if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | (uri=~"^sip:1515@")) { rewritehost("router IP"); forward(uri:host, uri:port); break; };

Thanks

Giuseppe

---

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.6.1/344 - Release Date: 19/05/2006

yes.. t_on_failure is "4" .. but when I restart ser I get 8 errors in config file, is there any way to check where these errors are?

route[3] {

if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | (uri=~"^sip:1515@")) { route(4); }

route[4] { rewritehost("routerA cisco IP"); forward(uri:host, uri:port); t_on_failure("4"); t_relay(); }

failure_route[4] { rewritehost("routerB cisco IP"); forward(uri:host, uri:port); append_branch(); t_relay(); }

Giuseppe

----- Original Message ----- From: "Tobias Lindgren" tobias.lindgren@ip-only.se To: "Giuseppe Parlato" gparlato@tnet.it Cc: serusers@lists.iptel.org Sent: Tuesday, May 23, 2006 12:39 PM Subject: Re: [Serusers] backup route

Yep, that works fine.

But t_on_failuer("X") == failure_route[X], so t_on_failure should be 4, if you use failure_route[4].

/T

Giuseppe Parlato said the following on 2006-05-23 12:25:

...

actually this is a subroute..

route[3] { if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | (uri=~"^sip:1515@")) { rewritehost("ip"); forward(uri:host, uri:port); break; };

.. called by he main route

if ((uri=~"^sip:1200[0-9]+@") && (!uri=~"^sip:1200200@") && (!uri=~"^sip:1200100@") ) { rewritehost("ip"); forward(uri:host, uri:port); break;

            } else {
                    route(3);
                    break;

..can I do like this?? call a subroute [4] from e subroute [3]?

if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | (uri=~"^sip:1515@")) { route(4); } route[4] { rewritehostport("192.168.0.1:5060"); t_on_failure("1"); t_relay(); }

failure_route[4] { rewritehostport("192.168.0.2:5060"); append_branch(); t_relay(); }

Giuseppe

----- Original Message ----- From: "Tobias Lindgren" tobias.lindgren@ip-only.se To: "Giuseppe Parlato" gparlato@tnet.it Cc: serusers@lists.iptel.org Sent: Tuesday, May 23, 2006 9:56 AM Subject: Re: [Serusers] backup route

...

Hello,

You can use the "route[]" and "failure_route[]" functions in ser.cfg.

A short example: if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | (uri=~"^sip:1515@")) { route(1); } route[1] { rewritehostport("192.168.0.1:5060"); t_on_failure("1"); t_relay(); }

failure_route[1] { rewritehostport("192.168.0.2:5060"); append_branch(); t_relay(); }

This above would relay on that you have the "tm.so" module loaded. Also, the tm-module has some parameters for timeouts and stuff (such as fr_timer) which you should laborate with.

Good luck!

Br, Tobias

Giuseppe Parlato said the following on 2006-05-22 18:04:

...

When calling some numbers I have to forward calls to a router cisco (then it wil forward calls out through isdn) or to a backup router cisco if the first one is busy. The route to primary cisco router works but I don't know how to implement the backup route in ser.cfg ? how can I configure a backup route in sip server? I hope someone can answer me soon, I'm in trouble :|

if ((uri=~"^sip:80[0-9]+@") | (uri=~"^sip:1[0-9][0-9]@") | (uri=~"^sip:1515@")) { rewritehost("router IP"); forward(uri:host, uri:port); break; };

Thanks

Giuseppe

---

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.6.1/344 - Release Date: 19/05/2006

-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.7.0/345 - Release Date: 22/05/2006