On 09/18/2012 12:15 PM, Gary Shergill wrote: Gary, I thought Bria uses RPID data format for presence (RFC 4480) while Blink uses PIDF so they won't be able to see presence status of each other. I see though that blink website mentions RPID as well, maybe somebody more knowledgeable about blink can correct me. For IM, add MESSAGE method to supported methods and send it after lookup like INVITE. For offline message delivery, checkout the msilo module readme. HTH, Andrew

Hi Gary!   You don't need to do anything to support MESSAGE requests on Kamailio. Following the guide from the web site, you will enable Presence. However, your problem seems to be with the client software. If I am correct, Blink uses Session mode (MSRP) for IM service. Bria uses Page mode (sip MESSAGE requests) for that. Try to use other clients, for example Jitsi. Presence and IM should be working there.   Martin ______________________________________________________________ Hi Kamailio Community, I've been configuring the presence module on Kamailio and trying to get it working, using the following as a guideline; http://nil.uniza.sk/instant-messaging/simple/configuring-im-and-presence-ka… enabled too. However, that doesn't seem to be the case. May I ask please how to configure IM on Kamailio? Note that I am testing this with one computer connected by Bria and another computer connected via Blink. I am able to log on to a user on each (test1 and test2) and they are able to call each other. The issue is, with presence enabled, they are unable to IM each other (or add each other as contacts and see online status). Thank you. Kind Regards, Gary Shergill _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users