Hi I did not reach that far yet, I am still trying to make it run with no errors. Thanks -----Original Message----- From: David Villasmil [mailto:david.villasmil.work@gmail.com] Sent: Monday, June 16, 2008 3:02 PM To: Ali Jawad Subject: Re: [OpenSER-Users] Acc/CDRTool Issue with log_flagyou are telling the system to log accounting on syslog... is that what you want? my whole module config is this: modparam("acc", "radius_config", "/etc/radiusclient-ng/radiusclient.conf") modparam("acc", "radius_flag", 2) modparam("acc", "radius_missed_flag", 3) I don't have any log flag, I'm already logging to radius... On Mon, Jun 16, 2008 at 2:00 PM, David Villasmil <david.villasmil.work(a)gmail.com> wrote: > then take a look at the file's permissions... it all seems ok to me. > > On Mon, Jun 16, 2008 at 1:58 PM, Ali Jawad <ali.jawad(a)splendor.net> wrote: >> Hi >> Yes I did >> >> This is a part of my openser script >> >> modparam("acc", "log_flag", 1) >> modparam("acc", "log_missed_flag", 1) >> >> modparam("acc", "radius_config","/usr/local/etc/radiusclient-ng/radiusclient.conf") >> >> >> >> -----Original Message----- >> From: David Villasmil [mailto:david.villasmil.work@gmail.com] >> Sent: Monday, June 16, 2008 2:55 PM >> To: Ali Jawad >> Subject: Re: [OpenSER-Users] Acc/CDRTool Issue >> >> did you tell the module where to find the dictionary? >> >> this is mine (I'm using 1.3): >> >> modparam("acc", "radius_config", "/etc/radiusclient-ng/radiusclient.conf") >> >> On Mon, Jun 16, 2008 at 1:51 PM, Ali Jawad <ali.jawad(a)splendor.net> wrote: >>> >>> Hi All >>> >>> I did add to in /etc/raddb/dictionary >>> >>> $INCLUDE /usr/share/freeradius/dictionary >>> $INCLUDE /etc/raddb/dictionary.ser >>> >>> I did add in /usr/local/etc/radiusclient-ng/dictionary >>> >>> $INCLUDE /usr/local/etc/radiusclient-ng/dictionary.ser the the LAST line. >>> >>> I did restart radiusd with no problems >>> >>> When I restarted Openser I got >>> >>> Jun 16 12:48:47 [4923] ERROR:acc:init_acc_rad: failed to read radius dictionary >>> Jun 16 12:48:47 [4923] ERROR:acc:mod_init: failed to init radius >>> Jun 16 12:48:47 [4923] ERROR:core:init_mod: failed to initialize module acc >>> Jun 16 12:48:47 [4923] ERROR:core:main: error while initializing modules >>> Jun 16 12:48:47 [4923] DBG:xlog:destroy: destroy module... >>> >>> >>> -----Original Message----- >>> From: David Villasmil [mailto:david.villasmil.work@gmail.com] >>> Sent: Monday, June 16, 2008 2:23 PM >>> To: Ali Jawad >>> Cc: users(a)lists.openser.org >>> Subject: Re: [OpenSER-Users] Acc/CDRTool Issue >>> >>> this is my config: >>> >>> on the server (radius): >>> >>> ls -l /etc/freeradius/dictionary.ser >>> -rw-r--r-- 1 root freerad 4233 2008-06-11 04:03 /etc/freeradius/dictionary.ser >>> >>> my /etc/freeradius/dictionary: >>> >>> $INCLUDE /usr/share/freeradius/dictionary >>> $INCLUDE /etc/freeradius/dictionary.ser >>> >>> >>> on the client (openser): >>> >>> ls -l /etc/radiusclient-ng/ >>> total 48 >>> -rw-r--r-- 1 root root 7375 2008-06-11 04:14 dictionary >>> -rw-r--r-- 1 root root 4233 2008-06-11 04:52 dictionary.ser >>> >>> in the file /etc/radiusclient-ng/dictionary AT THE VERY END: >>> >>> $INCLUDE /etc/radiusclient-ng/dictionary.ser >>> >>> >>> >>> >>> that's it. >>> >>> d >>> On Mon, Jun 16, 2008 at 1:13 PM, Ali Jawad <ali.jawad(a)splendor.net> wrote: >>>> >>>> >>>> Hi Again >>>> >>>> I have re-read the howto and it states that I should comment out the include line for the dictionary.ser file in the dictionary file for radiusclient-ng. Should I do the same for the server ? >>>> I did it for the client by adding the following line to the radiusclient-ng file >>>> >>>> $INCLUDE /usr/local/etc/radiusclient-ng/dictionary.ser >>>> >>>> This gave the following errror >>>> >>>> Jun 16 12:08:12 [4781] ERROR:acc:init_acc_rad: failed to read radius dictionary >>>> Jun 16 12:08:12 [4781] ERROR:acc:mod_init: failed to init radius >>>> Jun 16 12:08:12 [4781] ERROR:core:init_mod: failed to initialize module acc >>>> Jun 16 12:08:12 [4781] ERROR:core:main: error while initializing modules >>>> >>>> However if I do edit the radiusclient.conf file and point the dictionary directly to /usr/local/etc/radiusclient-ng/dictionary.ser openser appears to launch normally. Although nothing is added to the radius db. >>>> >>>> In short. >>>> >>>> Should I include the server as well ? >>>> >>>> Is my include line for the client correct ? >>>> >>>> Thanks. >>>> >>>> >>>> -----Original Message----- >>>> From: users-bounces(a)lists.openser.org [mailto:users-bounces@lists.openser.org] On Behalf Of Iñaki Baz Castillo >>>> Sent: Monday, June 16, 2008 1:01 PM >>>> To: users(a)lists.openser.org >>>> Subject: Re: [OpenSER-Users] Acc/CDRTool Issue >>>> >>>> El Monday 16 June 2008 11:19:58 Ali Jawad escribió: >>>>> Hi >>>>> The server and client are on the same machine. >>>>> >>>>> The freeradius server config files are on /etc/raddb/ >>>>> >>>>> So I did copy it to that dir >>>>> >>>>> [root@localhost radiusclient-ng]# cd /etc/raddb/ >>>>> [root@localhost raddb]# pwd >>>>> /etc/raddb >>>>> [root@localhost raddb]# ls dictionary.ser >>>>> dictionary.ser >>>>> [root@localhost raddb]# >>>> >>>> That's not enough. Check that you FreeRadius "dictionary" file has an #INCLUDE >>>> pointing to that file. >>>> >>>> -- >>>> Iñaki Baz Castillo >>>> ibc(a)in.ilimit.es >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users(a)lists.openser.org >>>> http://lists.openser.org/cgi-bin/mailman/listinfo/users >>>> >>>> -- >>>> This message has been scanned for viruses and >>>> dangerous content by MailScanner, and is >>>> believed to be clean. >>>> >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users(a)lists.openser.org >>>> http://lists.openser.org/cgi-bin/mailman/listinfo/users >>>> >>> >>> -- >>> This message has been scanned for viruses and >>> dangerous content by MailScanner, and is >>> believed to be clean. >>> >>> >> >> -- >> This message has been scanned for viruses and >> dangerous content by MailScanner, and is >> believed to be clean. >> >> > -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

then take a look at the file's permissions... it all seems ok to me. On Mon, Jun 16, 2008 at 1:58 PM, Ali Jawad <ali.jawad(a)splendor.net> wrote: > Hi > Yes I did > > This is a part of my openser script > > modparam("acc", "log_flag", 1) > modparam("acc", "log_missed_flag", 1) > > modparam("acc", "radius_config","/usr/local/etc/radiusclient-ng/radiusclient.conf") > > > > -----Original Message----- > From: David Villasmil [mailto:david.villasmil.work@gmail.com] > Sent: Monday, June 16, 2008 2:55 PM > To: Ali Jawad > Subject: Re: [OpenSER-Users] Acc/CDRTool Issue > > did you tell the module where to find the dictionary? > > this is mine (I'm using 1.3): > > modparam("acc", "radius_config", "/etc/radiusclient-ng/radiusclient.conf") > > On Mon, Jun 16, 2008 at 1:51 PM, Ali Jawad <ali.jawad(a)splendor.net> wrote: >> >> Hi All >> >> I did add to in /etc/raddb/dictionary >> >> $INCLUDE /usr/share/freeradius/dictionary >> $INCLUDE /etc/raddb/dictionary.ser >> >> I did add in /usr/local/etc/radiusclient-ng/dictionary >> >> $INCLUDE /usr/local/etc/radiusclient-ng/dictionary.ser the the LAST line. >> >> I did restart radiusd with no problems >> >> When I restarted Openser I got >> >> Jun 16 12:48:47 [4923] ERROR:acc:init_acc_rad: failed to read radius dictionary >> Jun 16 12:48:47 [4923] ERROR:acc:mod_init: failed to init radius >> Jun 16 12:48:47 [4923] ERROR:core:init_mod: failed to initialize module acc >> Jun 16 12:48:47 [4923] ERROR:core:main: error while initializing modules >> Jun 16 12:48:47 [4923] DBG:xlog:destroy: destroy module... >> >> >> -----Original Message----- >> From: David Villasmil [mailto:david.villasmil.work@gmail.com] >> Sent: Monday, June 16, 2008 2:23 PM >> To: Ali Jawad >> Cc: users(a)lists.openser.org >> Subject: Re: [OpenSER-Users] Acc/CDRTool Issue >> >> this is my config: >> >> on the server (radius): >> >> ls -l /etc/freeradius/dictionary.ser >> -rw-r--r-- 1 root freerad 4233 2008-06-11 04:03 /etc/freeradius/dictionary.ser >> >> my /etc/freeradius/dictionary: >> >> $INCLUDE /usr/share/freeradius/dictionary >> $INCLUDE /etc/freeradius/dictionary.ser >> >> >> on the client (openser): >> >> ls -l /etc/radiusclient-ng/ >> total 48 >> -rw-r--r-- 1 root root 7375 2008-06-11 04:14 dictionary >> -rw-r--r-- 1 root root 4233 2008-06-11 04:52 dictionary.ser >> >> in the file /etc/radiusclient-ng/dictionary AT THE VERY END: >> >> $INCLUDE /etc/radiusclient-ng/dictionary.ser >> >> >> >> >> that's it. >> >> d >> On Mon, Jun 16, 2008 at 1:13 PM, Ali Jawad <ali.jawad(a)splendor.net> wrote: >>> >>> >>> Hi Again >>> >>> I have re-read the howto and it states that I should comment out the include line for the dictionary.ser file in the dictionary file for radiusclient-ng. Should I do the same for the server ? >>> I did it for the client by adding the following line to the radiusclient-ng file >>> >>> $INCLUDE /usr/local/etc/radiusclient-ng/dictionary.ser >>> >>> This gave the following errror >>> >>> Jun 16 12:08:12 [4781] ERROR:acc:init_acc_rad: failed to read radius dictionary >>> Jun 16 12:08:12 [4781] ERROR:acc:mod_init: failed to init radius >>> Jun 16 12:08:12 [4781] ERROR:core:init_mod: failed to initialize module acc >>> Jun 16 12:08:12 [4781] ERROR:core:main: error while initializing modules >>> >>> However if I do edit the radiusclient.conf file and point the dictionary directly to /usr/local/etc/radiusclient-ng/dictionary.ser openser appears to launch normally. Although nothing is added to the radius db. >>> >>> In short. >>> >>> Should I include the server as well ? >>> >>> Is my include line for the client correct ? >>> >>> Thanks. >>> >>> >>> -----Original Message----- >>> From: users-bounces(a)lists.openser.org [mailto:users-bounces@lists.openser.org] On Behalf Of Iñaki Baz Castillo >>> Sent: Monday, June 16, 2008 1:01 PM >>> To: users(a)lists.openser.org >>> Subject: Re: [OpenSER-Users] Acc/CDRTool Issue >>> >>> El Monday 16 June 2008 11:19:58 Ali Jawad escribió: >>>> Hi >>>> The server and client are on the same machine. >>>> >>>> The freeradius server config files are on /etc/raddb/ >>>> >>>> So I did copy it to that dir >>>> >>>> [root@localhost radiusclient-ng]# cd /etc/raddb/ >>>> [root@localhost raddb]# pwd >>>> /etc/raddb >>>> [root@localhost raddb]# ls dictionary.ser >>>> dictionary.ser >>>> [root@localhost raddb]# >>> >>> That's not enough. Check that you FreeRadius "dictionary" file has an #INCLUDE >>> pointing to that file. >>> >>> -- >>> Iñaki Baz Castillo >>> ibc(a)in.ilimit.es >>> >>> _______________________________________________ >>> Users mailing list >>> Users(a)lists.openser.org >>> http://lists.openser.org/cgi-bin/mailman/listinfo/users >>> >>> -- >>> This message has been scanned for viruses and >>> dangerous content by MailScanner, and is >>> believed to be clean. >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users(a)lists.openser.org >>> http://lists.openser.org/cgi-bin/mailman/listinfo/users >>> >> >> -- >> This message has been scanned for viruses and >> dangerous content by MailScanner, and is >> believed to be clean. >> >> > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. > >