Hi List
My Problem is solved i think so...........i will get back to mention the solution.....
From: "Kapil Dhawan" sersavvy@hotmail.com To: sersavvy@hotmail.com, serusers@lists.iptel.org Subject: RE: [Serusers] PSTN Date: Tue, 01 Jun 2004 12:46:37 +0000
any help....
From: "Kapil Dhawan" sersavvy@hotmail.com To: sersavvy@hotmail.com CC: serusers@lists.iptel.org Subject: RE: [Serusers] PSTN Date: Tue, 01 Jun 2004 05:02:54 +0000
Hi my second part is done...i have used t_relay_to_udp rather than
forward for pstn calls and now logs are coming....for pstn as well
but first is till not done.
From: "Kapil Dhawan" sersavvy@hotmail.com To: serusers@lists.iptel.org Subject: [Serusers] PSTN Date: Tue, 01 Jun 2004 00:59:07 +0000
Hi List
I am running rtpproxy and nathelper which is fine for me...but when i
transfer all calls starting with 00 to my SIP gateway...then person calling from public IP is able to hear properly the pstn call and person calling behind NAT can not hear but the pstn callee can hear that behind NAT guy...
and second is i am storing logs in acc table...there is i make a
SIP-SIP call, i get proper logs but if i make PSTN call whether from public or private IP, i only get BYE record..
below is my ser.cfg
# # $Id: nathelper.cfg,v 1.1.2.1 2003/11/24 14:47:18 janakj Exp $ # # simple quick-start config script including nathelper support
# This default script includes nathelper support. To make it work # you will also have to install Maxim's RTP proxy. The proxy is
enforced
# if one of the parties is behind a NAT. # # If you have an endpoing in the public internet which is known to # support symmetric RTP (Cisco PSTN gateway or voicemail, for example), # then you don't have to force RTP proxy. If you don't want to enforce # RTP proxy for some destinations than simply use t_relay() instead of # route(1) # # Sections marked with !! Nathelper contain modifications for nathelper # # NOTE !! This config is EXPERIMENTAL ! # # ----------- global configuration parameters ------------------------
debug=8 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E)
/* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so"
# !! Nathelper loadmodule "/usr/local/lib/ser/modules/nathelper.so"
# !! Accounting loadmodule "/usr/local/lib/ser/modules/acc.so"
# !! Voicemail And Conference loadmodule "/usr/local/lib/ser/modules/vm.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)
# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this
config),
# uncomment also the following parameter) # modparam("auth_db", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# !! Nathelper # -- nathelper params -- modparam("registrar", "nat_flag", 6) modparam("nathelper", "natping_interval", 30) # Ping interval 30 s modparam("nathelper", "ping_nated_only", 1) # Ping only clients
behind NAT
# !! Accounting # -- acc params -- # set the reporting log level modparam("acc", "log_level", 2) # Set log_level to 2 # number of flag, which will be used for accounting; if a message is # labeled with this flag, its completion status will be reported modparam("acc", "log_flag", 1 ) modparam("acc", "log_missed_flag", 2) modparam("acc", "failed_transactions", 1) modparam("acc", "report_cancels", 1) modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2)
# !! Transaction # -- tm params -- modparam("tm", "fr_inv_timer", 200)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; };
# !! Nathelper# Special handling for NATed clients; first, NAT test is # executed: it looks for via!=received and RFC1918 addresses # in Contact (may fail if line-folding is used); also, # the received test should, if completed, should check all # vias for rpesence of received if (nat_uac_test("3")) { # Allow RR-ed requests, as these may indicate that # a NAT-enabled proxy takes care of it; unless it is # a REGISTER
if (method == "REGISTER" || ! search("^Record-Route:")) { log("LOG: Someone trying to register from private IP,rewriting\n");
# This will work only for user agents that support symmetric # communication. We tested quite many of them and majority is # smart enough to be symmetric. In some phones it takes aconfiguration
# option. With Cisco 7960, it is called NAT_Enable=Yes, withkphone it is
# called "symmetric media" and "symmetric signalling". fix_nated_contact(); # Rewrite contact with source IP ofsignalling
if (method == "INVITE") { fix_nated_sdp("1"); # Add direction=active to SDP }; force_rport(); # Add rport parameter to topmost Via setflag(6); # Mark as NATed };};
# labeled all transaction for accounting setflag(1); setflag(2);# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route();
# subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; };
if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if (method=="REGISTER") {# Uncomment this if you want to use digest authentication if (!www_authorize("220.226.42.185","subscriber")) { www_challenge("220.226.42.185", "0"); break; };
save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; };}; append_hf("P-hint: usrloc applied\r\n"); route(1); }
route[1] { # !! Nathelper if (uri=~"[@:](192.168.|10.|172.(1[6-9]|2[0-9]|3[0-1]).)" &&
!search("^Route:")){
sl_send_reply("479", "We don't forward to private IP addresses"); break; };# if client or server know to be behind a NAT, enable relay if (isflagset(6)) { force_rtp_proxy(); };
# NAT processing of replies; apply to all transactions (for example, # re-INVITEs from public to private UA are hard to identify as # NATed at the moment of request processing); look at replies t_on_reply("1");
if(uri=~"^sip:00*") { rewritehost(); forward() break; };
# send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; }
# !! Nathelper onreply_route[1] { # NATed transaction ? if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") { fix_nated_contact(); force_rtp_proxy(); # otherwise, is it a transaction behind a NAT and we did not # know at time of request processing ? (RFC1918 contacts) } else if (nat_uac_test("1")) { fix_nated_contact(); }; }
Post Classifieds on MSN classifieds.
http://go.msnserver.com/IN/44045.asp Buy and Sell on MSN Classifieds.
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
_________________________________________________________________ Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag Only on www.shaadi.com. Register now!
-
Kapil Dhawan