I am having an issue where I enable presence modules and the SCA module stops working. I disable presence and SCA works fine on Polycom phones. Does anyone know what I am missing or doing wrong?
Thank you in advance
Joel
Hi Joel,
When you say: "I enable presence modules" what you mean? Other than loading the module itself you may have included some code in kamailio.cfg using to handle the SUBSCRIBE messages for presence right?
Without knowing your config, one thing that crossed my mind is: - Since both SCA and PRESENCE modules need to handle SUBSCRIBE messages you need to be sure that you do it first using the SCA function "sca_handle_subscribe()" just for the ones with Event header == "call-info" or == "line-seize". Then, for all the other SUBSCRIBE messages you can use the PRESENCE module function.
There is an example of the code for filtering the ones to be handled by the SCA module function here: http://www.kamailio.org/docs/modules/devel/modules/sca.html#idp27944
You too mention that the SCA works fine on your Polycom phones, since I´m too trying to use it but having some issues, I will appreciate if you can share (either here or by pvt message) some info like: which Polycom phone models and firmware version you are using.
Regards, João Vitor Arruda
2014-07-08 13:26 GMT-03:00 Joel White joelewhite@gmail.com:
I am having an issue where I enable presence modules and the SCA module stops working. I disable presence and SCA works fine on Polycom phones. Does anyone know what I am missing or doing wrong?
Thank you in advance
Joel
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
I am enabling what was in the default config for WITH_PRESENCE
When I enable WITH_PRESENCE, the Polycom phones do not show BLF
Sure, I am using SPIP 335, SPIP 601 and 650, as well as VVX 1500 and SPIP 5000
For the 601 I am running Legacy firmware 3.1.8 combined with a Bootrom of 3.1.3 rev D
For the 335, 650, and 5000 I am running firmware version 3.2.6 Combined . I believe the Bootrom is 4.2.0
I have not started to work on auto provisioning with the VVX 1500 and have been manually configuring them. I believe that they will work with the 3.2.6 firmware as well although I have seen many using 4.0.3 firmware with the newer VVX models
Ask me anything and I will try to help :)
On Thu, Jul 10, 2014 at 7:28 AM, João Vitor Arruda joao.arruda@gmail.com wrote:
Hi Joel,
When you say: "I enable presence modules" what you mean? Other than loading the module itself you may have included some code in kamailio.cfg using to handle the SUBSCRIBE messages for presence right?
Without knowing your config, one thing that crossed my mind is:
- Since both SCA and PRESENCE modules need to handle SUBSCRIBE messages
you need to be sure that you do it first using the SCA function "sca_handle_subscribe()" just for the ones with Event header == "call-info" or == "line-seize". Then, for all the other SUBSCRIBE messages you can use the PRESENCE module function.
There is an example of the code for filtering the ones to be handled by the SCA module function here: http://www.kamailio.org/docs/modules/devel/modules/sca.html#idp27944
You too mention that the SCA works fine on your Polycom phones, since I´m too trying to use it but having some issues, I will appreciate if you can share (either here or by pvt message) some info like: which Polycom phone models and firmware version you are using.
Regards, João Vitor Arruda
2014-07-08 13:26 GMT-03:00 Joel White joelewhite@gmail.com:
I am having an issue where I enable presence modules and the SCA module stops working. I disable presence and SCA works fine on Polycom phones. Does anyone know what I am missing or doing wrong?
Thank you in advance
Joel
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Forgive me if this is daft - but what is your need for the Presence module?
It sounds like you're trying to enable two different technologies that do the same thing, since SCA already handles busy-lamps. I presume I'm just missing something.
-- Jorj
On Jul 14, 2014, at 3:57 PM, Joel White joelewhite@gmail.com wrote:
I am enabling what was in the default config for WITH_PRESENCE
When I enable WITH_PRESENCE, the Polycom phones do not show BLF
Sure, I am using SPIP 335, SPIP 601 and 650, as well as VVX 1500 and SPIP 5000
For the 601 I am running Legacy firmware 3.1.8 combined with a Bootrom of 3.1.3 rev D
For the 335, 650, and 5000 I am running firmware version 3.2.6 Combined . I believe the Bootrom is 4.2.0
I have not started to work on auto provisioning with the VVX 1500 and have been manually configuring them. I believe that they will work with the 3.2.6 firmware as well although I have seen many using 4.0.3 firmware with the newer VVX models
Ask me anything and I will try to help :)
On Thu, Jul 10, 2014 at 7:28 AM, João Vitor Arruda joao.arruda@gmail.com wrote: Hi Joel,
When you say: "I enable presence modules" what you mean? Other than loading the module itself you may have included some code in kamailio.cfg using to handle the SUBSCRIBE messages for presence right?
Without knowing your config, one thing that crossed my mind is:
- Since both SCA and PRESENCE modules need to handle SUBSCRIBE messages you need to be sure that you do it first using the SCA function "sca_handle_subscribe()" just for the ones with Event header == "call-info" or == "line-seize". Then, for all the other SUBSCRIBE messages you can use the PRESENCE module function.
There is an example of the code for filtering the ones to be handled by the SCA module function here: http://www.kamailio.org/docs/modules/devel/modules/sca.html#idp27944
You too mention that the SCA works fine on your Polycom phones, since I´m too trying to use it but having some issues, I will appreciate if you can share (either here or by pvt message) some info like: which Polycom phone models and firmware version you are using.
Regards, João Vitor Arruda
2014-07-08 13:26 GMT-03:00 Joel White joelewhite@gmail.com: I am having an issue where I enable presence modules and the SCA module stops working. I disable presence and SCA works fine on Polycom phones. Does anyone know what I am missing or doing wrong?
Thank you in advance
Joel
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-
Joel White -
Jorj Bauer -
João Vitor Arruda