hi,

First we signed in a@localhost.localdomain and which will subscribe b@localhost.localdomain's presence info.

Yes, we do receive 200 OK for that SUBSCRIBE. After that SER keep sending NOTIFY to a@localhost.localdomin with status "closed", even after b@localhost.localdomain signed in, and b also get same staff.

We expect to receive NOTIFY with status online on both side.

Can you help us ? the ser.cfg is attached below.

thanks, hong ----- Original Message ----- From: "Jan Janak" jan@iptel.org To: "hong cheng" chenhong@public.sta.net.cn Cc: serusers@iptel.org Sent: Friday, December 05, 2003 1:09 AM Subject: Re: [Serusers] help for PA can not work with MS messager 5.0

What exactly is not working ? Do you get any 200 OK for the SUBSCRIBE followed by a NOTIFY ?

Jan.

On 04-12 11:41, hong cheng wrote:

...

hi all,

Try to use presence feature with MS messager 5.0, seems SUBSCRIBER can not work. Can anybody have a look for the attached ser.cfg ?

Many thanks, hong

---

#debug=4 # debug level (cmd line: -dddddddddd) #listen=192.168.8.96 #fork=no #log_stderror=yes # (cmd line: -E)

#debug=7 #fork=no #log_stderror=yes

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/pa.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic -------------------

# main routing logic

route{

    # initial sanity checks -- messages with
    # max_forwards==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
            sl_send_reply("483","Too Many Hops");
            break;
    };
    if ( msg:len > max_len ) {
            sl_send_reply("513", "Message too big");
            break;
    };

    # we record-route all messages -- to make sure that
    # subsequent messages will go through our proxy; that's
    # particularly good if upstream and downstream entities
    # use different transport protocol
    record_route();
    # loose-route processing
    if (loose_route()) {
            t_relay();
            break;
    };

    # if the request is for other domain use UsrLoc
    # (in case, it does not work, use the following command
    # with proper names and addresses in it)
    if (uri==myself) {

            if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # };

                    save("location");
                    break;
            };

            if (method=="SUBSCRIBE") {
                    if (t_newtran()) {
                            handle_subscription("registrar");
                    };
                    break;
            };

            # native SIP destinations are handled using our USRLOC DB
            if (!lookup("location")) {
                    sl_send_reply("404", "Not Found");
                    break;
            };
    };
    # forward to current uri now; use stateful forwarding; that
    # works reliably even if we forward from TCP to UDP
    if (!t_relay()) {
            sl_reply_error();
    };

}

...

---

Serusers mailing list Serusers@iptel.org http://mail.iptel.org/mailman/listinfo/serusers