1 Jun
2004
1 Jun
'04
11:36 p.m.
When the caller to the offline user (connected to SEMS) hungup first the BYE message must
be sent to SEMS for release the call.
How i can send the BYE to SEMS only if the user that hungup are talking to SEMS ?
Ex:
if ( BYE or CANCEL ) {
if (for established SEMS session) {
vm("/tmp/am_fifo","bye")
} else {
end_media_session();
t_relay();
};
break;
};
Thanks
Ezequiel Colombo
3 Jun
3 Jun
4:08 a.m.
Record routing is used to forward BYE messages, so it should be routed
to SEMS automatically if you call loose_route() in your scripts (see the
default config file).
Jan.
On 01-06 16:36, Ezequiel Colombo wrote:
When the caller to the offline user (connected to
SEMS) hungup first the BYE message must be sent to SEMS for release the call.
How i can send the BYE to SEMS only if the user that hungup are talking to SEMS ?
Ex:
if ( BYE or CANCEL ) {
if (for established SEMS session) {
vm("/tmp/am_fifo","bye")
} else {
end_media_session();
t_relay();
};
break;
};
Thanks
Ezequiel Colombo
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
6:58 p.m.
Thanks Jan, but my problem is to differentiate if a received BYE is for a
established call with SEMS or any UserAgent.
I need this to known if need a "vm(/tmp/am_fifo, bye) or t_relay the BYE
message.
I have tried to make the two actions but dont work. The vm(bye) dont create
transaction and dont work withouth this, but if i create a transaction
before vm(bye) the t_relay fail (try to create a new trans).
if BYE or CANCEL received
I dont known if the BYE is for SEMS(localhost) or ANY Client(otherhost)
[or exist any way tho check this ?]
So i need send "bye" to SEMS for close the session
AND
t_relay the BYE (for Client(otherhost))
This cause that "bye" for SEMS fail (require transaction) - t_relay OK
or
cause that t_relay fail (ERROR: t_newtran: transaction already in process)
if i force a transaction before send "bye" to SEMS.
Thanks
Ezequiel Colombo
----- Original Message -----
From: "Jan Janak" <jan(a)iptel.org>
To: "Ezequiel Colombo" <ecolombo(a)arcotel.net>
Cc: <serusers(a)lists.iptel.org>
Sent: Wednesday, June 02, 2004 9:08 PM
Subject: Re: [Serusers] send BYE to SEMS
Record routing is used to forward BYE messages, so it
should be routed
to SEMS automatically if you call loose_route() in your scripts (see the
default config file).
Jan.
On 01-06 16:36, Ezequiel Colombo wrote:
> When the caller to the offline user (connected to SEMS) hungup first the
BYE
message must be sent to SEMS for release the call.
> How i can send the BYE to SEMS only if the user
that hungup are talking
to SEMS ?
Ex:
if ( BYE or CANCEL ) {
if (for established SEMS session) {
vm("/tmp/am_fifo","bye")
} else {
end_media_session();
t_relay();
};
break;
};
Thanks
Ezequiel Colombo
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
7 Jun
7 Jun
12:20 p.m.
SEMS puts a special delimiter into the username of the Contact header
field it generates. The content of the contact header field will be in
the Request-URI of BYE, so you can check if the Request-URI of BYE
contains that delimiter. If so then you can call vm, otherwise call
t_relay().
See user_prefix_separator parameter of SEMS.
Jan.
On 03-06 11:58, Ezequiel Colombo wrote:
Thanks Jan, but my problem is to differentiate if a
received BYE is for a
established call with SEMS or any UserAgent.
I need this to known if need a "vm(/tmp/am_fifo, bye) or t_relay the BYE
message.
I have tried to make the two actions but dont work. The vm(bye) dont create
transaction and dont work withouth this, but if i create a transaction
before vm(bye) the t_relay fail (try to create a new trans).
if BYE or CANCEL received
I dont known if the BYE is for SEMS(localhost) or ANY Client(otherhost)
[or exist any way tho check this ?]
So i need send "bye" to SEMS for close the session
AND
t_relay the BYE (for Client(otherhost))
This cause that "bye" for SEMS fail (require transaction) - t_relay OK
or
cause that t_relay fail (ERROR: t_newtran: transaction already in process)
if i force a transaction before send "bye" to SEMS.
Thanks
Ezequiel Colombo
----- Original Message -----
From: "Jan Janak" <jan(a)iptel.org>
To: "Ezequiel Colombo" <ecolombo(a)arcotel.net>
Cc: <serusers(a)lists.iptel.org>
Sent: Wednesday, June 02, 2004 9:08 PM
Subject: Re: [Serusers] send BYE to SEMS
Record routing is used to forward BYE messages,
so it should be routed
to SEMS automatically if you call loose_route() in your scripts (see the
default config file).
Jan.
On 01-06 16:36, Ezequiel Colombo wrote:
> When the caller to the offline user (connected to SEMS) hungup first the
BYE
message must be sent to SEMS for release the call.
> How i can send the BYE to SEMS only if the
user that hungup are talking
to SEMS ?
Ex:
if ( BYE or CANCEL ) {
if (for established SEMS session) {
vm("/tmp/am_fifo","bye")
} else {
end_media_session();
t_relay();
};
break;
};
Thanks
Ezequiel Colombo
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
10:02 p.m.
New subject: [Serusers] [DONE] send BYE to SEMS
Thanks Jan, i search in the sems list for syntax and implement the
"user_prefix_separator" in my sems.cfg.
SEMS prepend a "voicemail[user_prefix_separator] in the Contact URI for the
ACK and 200OK responses sent to the caller, so i make this configuration in
my ser.cfg for relay BYE to SEMS
if (method=="BYE") {
if (uri=~"sip:voicemail\+") {
log(1,"BYE for SEMS voicemail+");
if (!t_lookup_request()) {log(1,"ROUTE_0: force new
transaction"); t_newtran();};
if(!vm("/tmp/am_fifo","bye")){
log(1,"could not contact voicemail");
t_reply("500","could not contact voicemail");
};
break;
} else {
log(1,"BYE request for UAC");
end_media_session();
};
};
When receive a BYE from my PSTN gateway the Request-URI look like "BYE
sip:voicemail+ecolombo@172.16.200.54:5060 SIP/2.0"
Thanks again
Ezequiel Colombo
----- Original Message -----
From: "Jan Janak" <jan(a)iptel.org>
To: "Ezequiel Colombo" <ecolombo(a)arcotel.net>
Cc: <serusers(a)lists.iptel.org>
Sent: Monday, June 07, 2004 5:20 AM
Subject: Re: [Serusers] send BYE to SEMS
SEMS puts a special delimiter into the username of the
Contact header
field it generates. The content of the contact header field will be in
the Request-URI of BYE, so you can check if the Request-URI of BYE
contains that delimiter. If so then you can call vm, otherwise call
t_relay().
See user_prefix_separator parameter of SEMS.
Jan.
On 03-06 11:58, Ezequiel Colombo wrote:
> Thanks Jan, but my problem is to differentiate if a received BYE is for
a
> established call with SEMS or any UserAgent.
> I need this to known if need a "vm(/tmp/am_fifo, bye) or t_relay the BYE
> message.
>
> I have tried to make the two actions but dont work. The vm(bye) dont
create
> transaction and dont work withouth this, but if i
create a transaction
> before vm(bye) the t_relay fail (try to create a new trans).
>
> if BYE or CANCEL received
> I dont known if the BYE is for SEMS(localhost) or ANY
Client(otherhost)
> [or exist any way tho check this ?]
> So i need send "bye" to SEMS for close the session
> AND
> t_relay the BYE (for Client(otherhost))
>
> This cause that "bye" for SEMS fail (require transaction) - t_relay OK
> or
> cause that t_relay fail (ERROR: t_newtran: transaction already in
process)
> if i force a transaction before send
"bye" to SEMS.
>
> Thanks
> Ezequiel Colombo
>
> ----- Original Message -----
> From: "Jan Janak" <jan(a)iptel.org>
> To: "Ezequiel Colombo" <ecolombo(a)arcotel.net>
> Cc: <serusers(a)lists.iptel.org>
> Sent: Wednesday, June 02, 2004 9:08 PM
> Subject: Re: [Serusers] send BYE to SEMS
>
>
> > Record routing is used to forward BYE messages, so it should be routed
> > to SEMS automatically if you call loose_route() in your scripts (see
the
> > default config file).
> >
> > Jan.
> >
> > On 01-06 16:36, Ezequiel Colombo wrote:
> > > When the caller to the offline user (connected to SEMS) hungup first
the
> BYE message must be sent to SEMS for release the
call.
> > > How i can send the BYE to SEMS only if the user that hungup are
talking
to SEMS ?
Ex:
if ( BYE or CANCEL ) {
if (for established SEMS session) {
vm("/tmp/am_fifo","bye")
} else {
end_media_session();
t_relay();
};
break;
};
Thanks
Ezequiel Colombo
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
7463
days inactive
7469
days old
4 comments
2 participants
participants (2)
-
Ezequiel Colombo -
Jan Janak