Does Kamailio send BYE if opposite side lost connection? - sr-users - kamailio.org

List overview All Threads
Download

Does Kamailio send BYE if opposite side lost connection?

best practice to re-install...

Topos: contact header is not...

Nguyen Tran Nhan

10 Jun 2017 10 Jun '17

6:10 a.m.

Hi all, I am working in basic call. I got common cause that opposite side (callee) lost connection and caller still hangging in the call. Is there any message to server to caller in this case? Thanks, Nhan

Attachments:

attachment.html (text/html — 272 bytes)

Reply

Show replies by date

sgy

11 Jun 11 Jun

3:51 p.m.

Hi Nhan, As I know, You can refer to http://www.kamailio.org/docs/modules/stable/modules/sst.html#idp37398500. -- Best Regards, Shengy At 2017-06-10 12:10:29, "Nguyen Tran Nhan" <nguyentran(a)nccsoft.vn> wrote: Hi all, I am working in basic call. I got common cause that opposite side (callee) lost connection and caller still hangging in the call. Is there any message to server to caller in this case? Thanks, Nhan

Reply

Daniel-Constantin Mierla

12 Jun 12 Jun

5:19 p.m.

Hello, two options coming in my mind: 1) use dialog module and enable keepalive within the dialog 2) if you use an rtp relay (for nat traversal, etc), then thee were some patches that rtpproxy is sending an xmlrpc command to kamailio, which via dialog module can send a bye. Not sure what is the current status with that patch or if rtpengine has anything similar. Cheers, Daniel On 10.06.17 06:10, Nguyen Tran Nhan wrote:

Hi all, I am working in basic call. I got common cause that opposite side (callee) lost connection and caller still hangging in the call. Is there any message to server to caller in this case? Thanks, Nhan _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

-- Daniel-Constantin Mierla www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - www.asipto.com Kamailio World Conference - www.kamailioworld.com

Reply

Nguyen Tran Nhan

13 Jun 13 Jun

3:59 a.m.

New subject: Does Kamailio send BYE if opposite side lost connection?

Thanks Daniel, I am using rtpproxy, so I think the patches is good for me. Have you got any information about patch for rtpproxy? Thanks, Nhàn On Mon, Jun 12, 2017 at 10:19 PM, Daniel-Constantin Mierla < miconda(a)gmail.com> wrote:

Hello, two options coming in my mind: 1) use dialog module and enable keepalive within the dialog 2) if you use an rtp relay (for nat traversal, etc), then thee were some patches that rtpproxy is sending an xmlrpc command to kamailio, which via dialog module can send a bye. Not sure what is the current status with that patch or if rtpengine has anything similar. Cheers, Daniel On 10.06.17 06:10, Nguyen Tran Nhan wrote: Hi all, I am working in basic call. I got common cause that opposite side (callee) lost connection and caller still hangging in the call. Is there any message to server to caller in this case? Thanks, Nhan _______________________________________________ Kamailio (SER) - Users Mailing Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - www.asipto.com Kamailio World Conference - www.kamailioworld.com _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Reply

Nguyen Tran Nhan

14 Jun 14 Jun

4:29 a.m.

New subject: Does Kamailio send BYE if opposite side lost connection?

About installation dialog module, I add load dialog.so and it require to load outbound.so. After that it need to enable stcp. I think there is no stcp.so module? enable_stcp=1 does not work for me. Thanks, Nhan On Tue, Jun 13, 2017 at 8:59 AM, Nguyen Tran Nhan <nguyentran(a)nccsoft.vn> wrote:

Thanks Daniel, I am using rtpproxy, so I think the patches is good for me. Have you got any information about patch for rtpproxy? Thanks, Nhàn On Mon, Jun 12, 2017 at 10:19 PM, Daniel-Constantin Mierla < miconda(a)gmail.com> wrote:

Hello, two options coming in my mind: 1) use dialog module and enable keepalive within the dialog 2) if you use an rtp relay (for nat traversal, etc), then thee were some patches that rtpproxy is sending an xmlrpc command to kamailio, which via dialog module can send a bye. Not sure what is the current status with that patch or if rtpengine has anything similar. Cheers, Daniel On 10.06.17 06:10, Nguyen Tran Nhan wrote: Hi all, I am working in basic call. I got common cause that opposite side (callee) lost connection and caller still hangging in the call. Is there any message to server to caller in this case? Thanks, Nhan _______________________________________________ Kamailio (SER) - Users Mailing Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - www.asipto.com Kamailio World Conference - www.kamailioworld.com _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Reply

Nguyen Tran Nhan

15 Jun 15 Jun

9 a.m.

New subject: Does Kamailio send BYE if opposite side lost connection?

Thanks, I am able to install dialog module. Just add dlg_flag config for starting kamailio. But I think this flag is deprecated. It is using dlg_manage() now? Thanks, Nhan On Wed, Jun 14, 2017 at 9:29 AM, Nguyen Tran Nhan <nguyentran(a)nccsoft.vn> wrote:

About installation dialog module, I add load dialog.so and it require to load outbound.so. After that it need to enable stcp. I think there is no stcp.so module? enable_stcp=1 does not work for me. Thanks, Nhan On Tue, Jun 13, 2017 at 8:59 AM, Nguyen Tran Nhan <nguyentran(a)nccsoft.vn> wrote:

Thanks Daniel, I am using rtpproxy, so I think the patches is good for me. Have you got any information about patch for rtpproxy? Thanks, Nhàn On Mon, Jun 12, 2017 at 10:19 PM, Daniel-Constantin Mierla < miconda(a)gmail.com> wrote:

Hello, two options coming in my mind: 1) use dialog module and enable keepalive within the dialog 2) if you use an rtp relay (for nat traversal, etc), then thee were some patches that rtpproxy is sending an xmlrpc command to kamailio, which via dialog module can send a bye. Not sure what is the current status with that patch or if rtpengine has anything similar. Cheers, Daniel On 10.06.17 06:10, Nguyen Tran Nhan wrote: Hi all, I am working in basic call. I got common cause that opposite side (callee) lost connection and caller still hangging in the call. Is there any message to server to caller in this case? Thanks, Nhan _______________________________________________ Kamailio (SER) - Users Mailing Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - www.asipto.com Kamailio World Conference - www.kamailioworld.com _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Reply

Abdoul Osséni

9:07 a.m.

New subject: Does Kamailio send BYE if opposite side lost connection?

Hi, I think, you can use the following config. ..... ..... ..... #!define FLT_DLG 9 ..... ..... ..... loadmodule "dialog.so" ..... ..... ..... # ----- dialog params ----- modparam("dialog", "enable_stats", 1) modparam("dialog", "dlg_flag", FLT_DLG) modparam("dialog", "send_bye", 1) modparam("dialog", "ka_timer", 5) modparam("dialog", "ka_interval", 30) ..... ..... ..... route[RELAY] { ..... ..... ..... if (is_method("INVITE")) { setflag(FLT_DLG); dlg_set_property("ka-src"); dlg_set_property("timeout-noreset"); } dlg_manage(); ..... ..... ..... Regards Abdoul. 2017-06-15 9:00 GMT+02:00 Nguyen Tran Nhan <nguyentran(a)nccsoft.vn>vn>:

Thanks, I am able to install dialog module. Just add dlg_flag config for starting kamailio. But I think this flag is deprecated. It is using dlg_manage() now? Thanks, Nhan On Wed, Jun 14, 2017 at 9:29 AM, Nguyen Tran Nhan <nguyentran(a)nccsoft.vn> wrote:

About installation dialog module, I add load dialog.so and it require to load outbound.so. After that it need to enable stcp. I think there is no stcp.so module? enable_stcp=1 does not work for me. Thanks, Nhan On Tue, Jun 13, 2017 at 8:59 AM, Nguyen Tran Nhan <nguyentran(a)nccsoft.vn> wrote:

Thanks Daniel, I am using rtpproxy, so I think the patches is good for me. Have you got any information about patch for rtpproxy? Thanks, Nhàn On Mon, Jun 12, 2017 at 10:19 PM, Daniel-Constantin Mierla < miconda(a)gmail.com> wrote:

Hello, two options coming in my mind: 1) use dialog module and enable keepalive within the dialog 2) if you use an rtp relay (for nat traversal, etc), then thee were some patches that rtpproxy is sending an xmlrpc command to kamailio, which via dialog module can send a bye. Not sure what is the current status with that patch or if rtpengine has anything similar. Cheers, Daniel On 10.06.17 06:10, Nguyen Tran Nhan wrote: Hi all, I am working in basic call. I got common cause that opposite side (callee) lost connection and caller still hangging in the call. Is there any message to server to caller in this case? Thanks, Nhan _______________________________________________ Kamailio (SER) - Users Mailing Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - www.asipto.com Kamailio World Conference - www.kamailioworld.com _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

-- Abdoul OSSENI Ingénieur Réseaux et systèmes chez THALES Co-Fondateur de ON SERVICES Tél : +33 601 135 167

Reply

Nguyen Tran Nhan

9:41 a.m.

New subject: Does Kamailio send BYE if opposite side lost connection?

Thank Abdoul, I use your suggest config and kamailio start now but there is no message when opposite site lost connection. Thanks, Nhan On Thu, Jun 15, 2017 at 2:07 PM, Abdoul Osséni <abdoul.osseni(a)gmail.com> wrote:

Hi, I think, you can use the following config. ..... ..... ..... #!define FLT_DLG 9 ..... ..... ..... loadmodule "dialog.so" ..... ..... ..... # ----- dialog params ----- modparam("dialog", "enable_stats", 1) modparam("dialog", "dlg_flag", FLT_DLG) modparam("dialog", "send_bye", 1) modparam("dialog", "ka_timer", 5) modparam("dialog", "ka_interval", 30) ..... ..... ..... route[RELAY] { ..... ..... ..... if (is_method("INVITE")) { setflag(FLT_DLG); dlg_set_property("ka-src"); dlg_set_property("timeout-noreset"); } dlg_manage(); ..... ..... ..... Regards Abdoul. 2017-06-15 9:00 GMT+02:00 Nguyen Tran Nhan <nguyentran(a)nccsoft.vn>vn>:

Thanks, I am able to install dialog module. Just add dlg_flag config for starting kamailio. But I think this flag is deprecated. It is using dlg_manage() now? Thanks, Nhan On Wed, Jun 14, 2017 at 9:29 AM, Nguyen Tran Nhan <nguyentran(a)nccsoft.vn> wrote:

About installation dialog module, I add load dialog.so and it require to load outbound.so. After that it need to enable stcp. I think there is no stcp.so module? enable_stcp=1 does not work for me. Thanks, Nhan On Tue, Jun 13, 2017 at 8:59 AM, Nguyen Tran Nhan <nguyentran(a)nccsoft.vn

wrote:

Thanks Daniel, I am using rtpproxy, so I think the patches is good for me. Have you got any information about patch for rtpproxy? Thanks, Nhàn On Mon, Jun 12, 2017 at 10:19 PM, Daniel-Constantin Mierla < miconda(a)gmail.com> wrote: > Hello, > > two options coming in my mind: > > 1) use dialog module and enable keepalive within the dialog > 2) if you use an rtp relay (for nat traversal, etc), then thee were > some patches that rtpproxy is sending an xmlrpc command to kamailio, which > via dialog module can send a bye. Not sure what is the current status with > that patch or if rtpengine has anything similar. > > Cheers, > Daniel > > > > On 10.06.17 06:10, Nguyen Tran Nhan wrote: > > Hi all, > I am working in basic call. I got common cause that opposite side > (callee) lost connection and caller still hangging in the call. Is there > any message to server to caller in this case? > > Thanks, > Nhan > > > _______________________________________________ > Kamailio (SER) - Users Mailing Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > > > -- > Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda > Kamailio Advanced Training - www.asipto.com > Kamailio World Conference - www.kamailioworld.com > > > _______________________________________________ > Kamailio (SER) - Users Mailing List > sr-users(a)lists.kamailio.org > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > >

_______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

-- Abdoul OSSENI Ingénieur Réseaux et systèmes chez THALES Co-Fondateur de ON SERVICES Tél : +33 601 135 167 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Reply

Abdoul Osséni

9:48 a.m.

New subject: Does Kamailio send BYE if opposite side lost connection?

opposite site ie caller or callee ? here the extract of the dialog documentation: dlg_set_property(attr) Set a dialog property - an attribute that enable/disable various behaviours (e.g., sending keep alive requests). Meaning of the parameters is as follows: - *attr* - name of property. It can be: - 'ka-src' - send keep alive OPTION requests to caller - 'ka-dst' - send keep alive OPTION requests to callee - 'timeout-noreset' - don't reset timeout on in-dialog messages reception If keep alive is enabled for a dialog, the module will send SIP OPTIONS requests with CSeq lower or equal than last request within dialog, with the scope of detecting if the destination is still in the call. If the keep alive request results in a local timeout or '481 Call Leg/Transaction Does Not Exist', then the dialog is ended from the server. If 'timeout-noreset' is set, dialog timeout won't be reset upon reception of in-dialog messages (default behavior). This function can be used from ANY_ROUTE. Regards 2017-06-15 9:41 GMT+02:00 Nguyen Tran Nhan <nguyentran(a)nccsoft.vn>vn>:

Thank Abdoul, I use your suggest config and kamailio start now but there is no message when opposite site lost connection. Thanks, Nhan On Thu, Jun 15, 2017 at 2:07 PM, Abdoul Osséni <abdoul.osseni(a)gmail.com> wrote:

Hi, I think, you can use the following config. ..... ..... ..... #!define FLT_DLG 9 ..... ..... ..... loadmodule "dialog.so" ..... ..... ..... # ----- dialog params ----- modparam("dialog", "enable_stats", 1) modparam("dialog", "dlg_flag", FLT_DLG) modparam("dialog", "send_bye", 1) modparam("dialog", "ka_timer", 5) modparam("dialog", "ka_interval", 30) ..... ..... ..... route[RELAY] { ..... ..... ..... if (is_method("INVITE")) { setflag(FLT_DLG); dlg_set_property("ka-src"); dlg_set_property("timeout-noreset"); } dlg_manage(); ..... ..... ..... Regards Abdoul. 2017-06-15 9:00 GMT+02:00 Nguyen Tran Nhan <nguyentran(a)nccsoft.vn>vn>:

Thanks, I am able to install dialog module. Just add dlg_flag config for starting kamailio. But I think this flag is deprecated. It is using dlg_manage() now? Thanks, Nhan On Wed, Jun 14, 2017 at 9:29 AM, Nguyen Tran Nhan <nguyentran(a)nccsoft.vn

wrote:

About installation dialog module, I add load dialog.so and it require to load outbound.so. After that it need to enable stcp. I think there is no stcp.so module? enable_stcp=1 does not work for me. Thanks, Nhan On Tue, Jun 13, 2017 at 8:59 AM, Nguyen Tran Nhan < nguyentran(a)nccsoft.vn> wrote: > Thanks Daniel, > I am using rtpproxy, so I think the patches is good for me. Have you > got any information about patch for rtpproxy? > > Thanks, > Nhàn > > On Mon, Jun 12, 2017 at 10:19 PM, Daniel-Constantin Mierla < > miconda(a)gmail.com> wrote: > >> Hello, >> >> two options coming in my mind: >> >> 1) use dialog module and enable keepalive within the dialog >> 2) if you use an rtp relay (for nat traversal, etc), then thee were >> some patches that rtpproxy is sending an xmlrpc command to kamailio, which >> via dialog module can send a bye. Not sure what is the current status with >> that patch or if rtpengine has anything similar. >> >> Cheers, >> Daniel >> >> >> >> On 10.06.17 06:10, Nguyen Tran Nhan wrote: >> >> Hi all, >> I am working in basic call. I got common cause that opposite side >> (callee) lost connection and caller still hangging in the call. Is there >> any message to server to caller in this case? >> >> Thanks, >> Nhan >> >> >> _______________________________________________ >> Kamailio (SER) - Users Mailing Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >> >> >> -- >> Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda >> Kamailio Advanced Training - www.asipto.com >> Kamailio World Conference - www.kamailioworld.com >> >> >> _______________________________________________ >> Kamailio (SER) - Users Mailing List >> sr-users(a)lists.kamailio.org >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >> >> >

_______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

-- Abdoul OSSENI Ingénieur Réseaux et systèmes chez THALES Co-Fondateur de ON SERVICES Tél : +33 601 135 167 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

-- Abdoul OSSENI Ingénieur Réseaux et systèmes chez THALES Co-Fondateur de ON SERVICES Tél : +33 601 135 167

Reply

2531

days inactive

2536

days old

sr-users@lists.kamailio.org

Manage subscription

8 comments

4 participants

tags (0)

participants (4)

Abdoul Osséni
Daniel-Constantin Mierla
Nguyen Tran Nhan
sgy