You use usrloc-cl? If not, unless you replicate, the non-REGISTER handling server will not have the usrloc in memory. g-) Tomasz Zieleniewski wrote: Hi Jiri, On Nov 25, 2007 10:08 PM, Jiri Kuthan <jiri(a)iptel.org> wrote: At 10:56 25/11/2007, Tomasz Zieleniewski wrote: Hi, I don't have those lines because I have a registrar on seperate SIP Proxy. This proxy here is the boundary one, but they both use the same database and have access to location table common. Well, I'm not sure I'm getting the context of this configuration so I don't feel certain with providing some hints (in particular two proxy serveer in a series both using usrloc seems unusual to me). A hand-waving estimate is you need to configure the "boundary proxy" to change all natted clients to form "as seen by the network" and the "actual proxy" to send pings to all contacts. Boundary proxy uses usrloc only for the purpose of pinging the natted users. Nathelper module requires usrloc. Because all reuqest travels 'boundary proxy' before entering network the 'boundary proxy' must ping users to keep my nat bindings right. they are both on seperate machines. -tomek -jiri -tomasz On Nov 25, 2007 10:40 AM, Jiri Kuthan <jiri(a)iptel.org> wrote: Hi Tomasz, well it could be that reusing an existing config and commiting than your specific changes to it would save you quite some laborous exercises rather than writing it from scratch.... http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/etc/ser-oob.cfg?re… The lines in question are (out of which I think you are missing the registrar params) FLAG_NAT : 3, # the UAC is behind a NAT ... # identify natted contacts using a flag modparam("registrar", "load_nat_flag", "FLAG_NAT") modparam("registrar", "save_nat_flag", "FLAG_NAT") ... modparam("rr", "cookie_filter", "(account|uac_nat)") ... modparam("nathelper", "ping_nated_only", 1 ) # if this option is not set, simple 4-bytes ping is sent modparam("nathelper", "natping_method", "OPTIONS" ) #temporary statefull natping test (only in future versions) #modparam("nathelper", "natping_stateful", 1) ... setflag(FLAG_NAT); -jiri At 22:20 24/11/2007, Tomasz Zieleniewski wrote: I'm sorry for the CC here is my config: debug=3 # debug level (cmd line: -dddddddddd) memdbg=5 memlog=5 log_facility=LOG_LOCAL0 fork=yes log_stderror=no check_via=yes # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 tls_port_no=5061 children=4 user=ser group=ser mhomed=yes disable_tcp=no tcp_accept_aliases=yes enable_tls=no sip_warning=0 reply_to_via=no alias="voip.touk.pl" dns_retr_time=1 dns_retr_no=1 dns_servers_no=1 dns_use_search_list=no dns_try_ipv6=no # dns cache & failover use_dns_cache=on use_dns_failover=on # dns_cache_flags=0 dns_cache_negative_ttl=300 dns_cache_min_ttl=60 dns_cache_max_ttl=86400 # 1 day dns_cache_mem=2048 # 2 MB dns_cache_gc_interval=60 tcp_connection_lifetime=3600 tcp_max_connections=2048 tcp_connect_timeout=1 loadmodule ... .... # specify the path to you database here modparam("acc_db|auth_db|avp_db|domain|gflags|usrloc|uri_db|speeddial|msilo|lcr", "db_url", "mysql://ser:ser@localhost/ser") # -- usrloc params -- modparam("usrloc", "db_mode", 1) # -- registrar params -- modparam("registrar", "default_expires", 300) modparam("registrar", "min_expires", 60) modparam("registrar", "max_expires", 300) modparam("registrar", "append_branches", 1) modparam("registrar", "received_param", "rcv") modparam("registrar", "max_contacts", 2) # -- auth params -- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") # -- rr params -- modparam("rr", "enable_full_lr", 1) modparam("rr", "cookie_filter", "uac_nat") modparam("rr", "cookie_secret", "secret") modparam("rr", "user_part_avp", "route_user") modparam("rr", "next_route_avp", "route_next") # -- gflags params -- modparam("gflags", "load_global_attrs", 1) # -- domain params -- modparam("domain", "load_domain_attrs", 1) # -- ctl params -- modparam("ctl", "binrpc", "unixs:/tmp/ser-bsp_ctl") modparam("ctl", "fifo", "fifo:/tmp/ser-bsp_fifo") # modparam("ctl", "binrpc", "tcp:localhost:2046") modparam("ctl", "mode", 0777) # -- tm params -- modparam("tm", "restart_fr_on_each_reply", 1) # -- auth_radius params -- modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("auth_radius", "service_type", 15) # -- options params -- modparam("options", "accept", "*/*") modparam("options", "accept_encoding", "") modparam("options", "accept_language", "en") # -- ratelimit params -- modparam("ratelimit","timer_interval", 10) modparam("ratelimit","invite_limit", 100) modparam("ratelimit","register_limit", 100) modparam("ratelimit","subscribe_limit", 100) # -- xmlrpc params -- modparam("xmlrpc", "route","RPC") # -- nathelper params -- modparam("nathelper", "natping_interval", 20) modparam("nathelper", "ping_nated_only", 0) modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "tcpping_crlf", 1) # -- tls params -- modparam("tls", "config", "/home/ser/ser/ca/tls-bsp.cfg") modparam("tls", "tls_force_run", 0) modparam("tls", "tls_log",3) modparam("tls", "handshake_timeout", 10) modparam("tls", "send_timeout", 10) modparam("tls", "tls_disable_compression", 0) #modparam("tls", "private_key", "/etc/certs/key.pem") #modparam("tls", "certificate", "/etc/certs/cert.pem") #modparam("tls", "ca_list", "/etc/certs/ca_list.pem") #modparam("tls", "require_certificate", 0) #modparam("tls", "verify_certificate", 1) #modparam("tls", "tls_method", "TLSv1") route{ ... } On Nov 24, 2007 9:35 PM, Atle Samuelsen <clona(a)cyberhouse.no> wrote: Hi, Always CC the list. then I dont know.. post your full config so people can see if they see something -A * Tomasz Zieleniewski <tzieleniewski(a)gmail.com> [071124 20:38]: Hi, I had that parameter set to 0, but still no udp packets... On Nov 24, 2007 6:43 PM, Atle Samuelsen <clona(a)cyberhouse.no> wrote: * Tomasz Zieleniewski <tzieleniewski(a)gmail.com> [071124 16:50]: HI, I have the following nathelper settings: modparam("nathelper", "natping_interval", 20) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "tcpping_crlf", 1) But i cant see any udp packets being sent to registered users. Please point me what did I miss. Hi, without seeing any more of your config, I'm guessing that you do not set the natflag, so if you change ping_nated_only to 0, I think you will see some udp packets. - Atle (shot in the whild world of sip) Best Tomasz _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/ _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/ _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

usrloc-cl is a cacheless version of usrloc module, i.e. nothing is stored in memory. I believe Martin Hoffmann took over maintenance of it, but I'm not sure about the status on 2.0.0. If your edge proxy uses usrloc-cl instead of usrloc, it will pull locations to ping from the DB instead of from memory. g-) Tomasz Zieleniewski wrote: what is usrloc-cl?? What do you mean by that and how can I do that? -tomasz On Nov 27, 2007 8:58 AM, Greger V. Teigre <greger(a)teigre.com> wrote: You use usrloc-cl? If not, unless you replicate, the non-REGISTER handling server will not have the usrloc in memory. g-) Tomasz Zieleniewski wrote: Hi Jiri, On Nov 25, 2007 10:08 PM, Jiri Kuthan <jiri(a)iptel.org> wrote: At 10:56 25/11/2007, Tomasz Zieleniewski wrote: Hi, I don't have those lines because I have a registrar on seperate SIP Proxy. This proxy here is the boundary one, but they both use the same database and have access to location table common. Well, I'm not sure I'm getting the context of this configuration so I don't feel certain with providing some hints (in particular two proxy serveer in a series both using usrloc seems unusual to me). A hand-waving estimate is you need to configure the "boundary proxy" to change all natted clients to form "as seen by the network" and the "actual proxy" to send pings to all contacts. Boundary proxy uses usrloc only for the purpose of pinging the natted users. Nathelper module requires usrloc. Because all reuqest travels 'boundary proxy' before entering network the 'boundary proxy' must ping users to keep my nat bindings right. they are both on seperate machines. -tomek -jiri -tomasz On Nov 25, 2007 10:40 AM, Jiri Kuthan <jiri(a)iptel.org> wrote: Hi Tomasz, well it could be that reusing an existing config and commiting than your specific changes to it would save you quite some laborous exercises rather than writing it from scratch.... http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/etc/ser-oob.cfg?re… The lines in question are (out of which I think you are missing the registrar params) FLAG_NAT : 3, # the UAC is behind a NAT ... # identify natted contacts using a flag modparam("registrar", "load_nat_flag", "FLAG_NAT") modparam("registrar", "save_nat_flag", "FLAG_NAT") ... modparam("rr", "cookie_filter", "(account|uac_nat)") ... modparam("nathelper", "ping_nated_only", 1 ) # if this option is not set, simple 4-bytes ping is sent modparam("nathelper", "natping_method", "OPTIONS" ) #temporary statefull natping test (only in future versions) #modparam("nathelper", "natping_stateful", 1) ... setflag(FLAG_NAT); -jiri At 22:20 24/11/2007, Tomasz Zieleniewski wrote: I'm sorry for the CC here is my config: debug=3 # debug level (cmd line: -dddddddddd) memdbg=5 memlog=5 log_facility=LOG_LOCAL0 fork=yes log_stderror=no check_via=yes # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 tls_port_no=5061 children=4 user=ser group=ser mhomed=yes disable_tcp=no tcp_accept_aliases=yes enable_tls=no sip_warning=0 reply_to_via=no alias="voip.touk.pl" dns_retr_time=1 dns_retr_no=1 dns_servers_no=1 dns_use_search_list=no dns_try_ipv6=no # dns cache & failover use_dns_cache=on use_dns_failover=on # dns_cache_flags=0 dns_cache_negative_ttl=300 dns_cache_min_ttl=60 dns_cache_max_ttl=86400 # 1 day dns_cache_mem=2048 # 2 MB dns_cache_gc_interval=60 tcp_connection_lifetime=3600 tcp_max_connections=2048 tcp_connect_timeout=1 loadmodule ... .... # specify the path to you database here modparam("acc_db|auth_db|avp_db|domain|gflags|usrloc|uri_db|speeddial|msilo|lcr", "db_url", "mysql://ser:ser@localhost/ser") # -- usrloc params -- modparam("usrloc", "db_mode", 1) # -- registrar params -- modparam("registrar", "default_expires", 300) modparam("registrar", "min_expires", 60) modparam("registrar", "max_expires", 300) modparam("registrar", "append_branches", 1) modparam("registrar", "received_param", "rcv") modparam("registrar", "max_contacts", 2) # -- auth params -- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") # -- rr params -- modparam("rr", "enable_full_lr", 1) modparam("rr", "cookie_filter", "uac_nat") modparam("rr", "cookie_secret", "secret") modparam("rr", "user_part_avp", "route_user") modparam("rr", "next_route_avp", "route_next") # -- gflags params -- modparam("gflags", "load_global_attrs", 1) # -- domain params -- modparam("domain", "load_domain_attrs", 1) # -- ctl params -- modparam("ctl", "binrpc", "unixs:/tmp/ser-bsp_ctl") modparam("ctl", "fifo", "fifo:/tmp/ser-bsp_fifo") # modparam("ctl", "binrpc", "tcp:localhost:2046") modparam("ctl", "mode", 0777) # -- tm params -- modparam("tm", "restart_fr_on_each_reply", 1) # -- auth_radius params -- modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("auth_radius", "service_type", 15) # -- options params -- modparam("options", "accept", "*/*") modparam("options", "accept_encoding", "") modparam("options", "accept_language", "en") # -- ratelimit params -- modparam("ratelimit","timer_interval", 10) modparam("ratelimit","invite_limit", 100) modparam("ratelimit","register_limit", 100) modparam("ratelimit","subscribe_limit", 100) # -- xmlrpc params -- modparam("xmlrpc", "route","RPC") # -- nathelper params -- modparam("nathelper", "natping_interval", 20) modparam("nathelper", "ping_nated_only", 0) modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "tcpping_crlf", 1) # -- tls params -- modparam("tls", "config", "/home/ser/ser/ca/tls-bsp.cfg") modparam("tls", "tls_force_run", 0) modparam("tls", "tls_log",3) modparam("tls", "handshake_timeout", 10) modparam("tls", "send_timeout", 10) modparam("tls", "tls_disable_compression", 0) #modparam("tls", "private_key", "/etc/certs/key.pem") #modparam("tls", "certificate", "/etc/certs/cert.pem") #modparam("tls", "ca_list", "/etc/certs/ca_list.pem") #modparam("tls", "require_certificate", 0) #modparam("tls", "verify_certificate", 1) #modparam("tls", "tls_method", "TLSv1") route{ ... } On Nov 24, 2007 9:35 PM, Atle Samuelsen <clona(a)cyberhouse.no> wrote: Hi, Always CC the list. then I dont know.. post your full config so people can see if they see something -A * Tomasz Zieleniewski <tzieleniewski(a)gmail.com> [071124 20:38]: Hi, I had that parameter set to 0, but still no udp packets... On Nov 24, 2007 6:43 PM, Atle Samuelsen <clona(a)cyberhouse.no> wrote: * Tomasz Zieleniewski <tzieleniewski(a)gmail.com> [071124 16:50]: HI, I have the following nathelper settings: modparam("nathelper", "natping_interval", 20) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "tcpping_crlf", 1) But i cant see any udp packets being sent to registered users. Please point me what did I miss. Hi, without seeing any more of your config, I'm guessing that you do not set the natflag, so if you change ping_nated_only to 0, I think you will see some udp packets. - Atle (shot in the whild world of sip) Best Tomasz _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/ _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/ _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers