New subject: [Serusers] multiple SIPURA behind same NAT

18 Jan 2005

What firewall do you have?

Your firewall probably has problems to support hairpin traffic.

Richard

  _____  

From: Raymond Chen [mailto:rchen@cityabove.net] 
Sent: Tuesday, January 18, 2005 4:56 PM
To: 'Richard'
Cc: serusers(a)lists.iptel.org
Subject: RE: [Serusers] multiple SIPURA behind same NAT

We use SIPURA 2000 and rtpproxy.  I have attached the sip message log.

Ray

  _____  

From: Richard [mailto:richard@o-matrix.org] 
Sent: Wednesday, January 19, 2005 10:27 AM
To: 'Raymond Chen'
Cc: serusers(a)lists.iptel.org
Subject: RE: [Serusers] multiple SIPURA behind same NAT

What nat device do you have? Does it have any sip helper module? Are you
running rtpproxy? It will be helpful if you can send a sip packet dump.

Richard

  _____  

From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On
Behalf Of Raymond Chen
Sent: Tuesday, January 18, 2005 2:59 PM
To: 'Matt Schulte'
Cc: serusers(a)lists.iptel.org
Subject: RE: [Serusers] multiple SIPURA behind same NAT

Matt,

Both port use different sip port, and can make calls at the same time.  But
still can't get voice when call to each other.

Raymond

  _____  

From: Matt Schulte [mailto:mschulte@netlogic.net] 
Sent: Tuesday, January 18, 2005 9:08 AM
To: Raymond Chen; serusers(a)lists.iptel.org
Subject: RE: [Serusers] multiple SIPURA behind same NAT

If I had a guess I would say either the NAT or rtp/media proxy is getting
confused about which client is which. Ignoring the problem for a second, can
both sipura's make calls at the same time? Are you using NAThelper for this
with SER? You mentioned "without proxy", this would mean port forwarding?
Try this, make each sipura use a diff range of RTP ports (in their config).

     Matt

-----Original Message-----
From: Raymond Chen [mailto:rchen@cityabove.net] 
Sent: Monday, January 17, 2005 12:25 PM
To: serusers(a)lists.iptel.org
Subject: [Serusers] multiple SIPURA behind same NAT

Dear all, 

I have two sipura box behind NAT.  both use via header and can dial out and
received calls without proxy.  but they have no voice when they call to each
other, any idea?

Raymond