21 Jul
2006
21 Jul
'06
10:32 a.m.
Hi.. I got the following error when I try to start ser:
parse error (329,55-56): unknown command, missing loadmodule?
ERROR: bad config file (1 errors)
ser startup failed
so on my configuration file the problem is this here:
} else if ((method=="INVITE") & !check_from()) {
I was using ser 0.8.14 then upgraded to 0.9.6, but configuration file has
not been changed. The same file worked on 0.8.14 version.
help please
Giuseppe
21 Jul
21 Jul
10:59 a.m.
maybe && instead of & ?????
this error message also happens if you forget to close all if blocks
(watch out for missing '}' )
regards
klaus
Giuseppe Parlato wrote:
Hi.. I got the following error when I try to start
ser:
parse error (329,55-56): unknown command, missing loadmodule?
ERROR: bad config file (1 errors)
ser startup failed
so on my configuration file the problem is this here:
} else if ((method=="INVITE") & !check_from()) {
I was using ser 0.8.14 then upgraded to 0.9.6, but configuration file
has not been changed. The same file worked on 0.8.14 version.
help please
Giuseppe
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
22 Jul
22 Jul
12:02 p.m.
I think it's the check_from() that gives the error. Check if you've
loaded uri_db.so module...
On 7/21/06, Klaus Darilion <klaus.mailinglists(a)pernau.at> wrote:
maybe && instead of & ?????
this error message also happens if you forget to close all if blocks
(watch out for missing '}' )
regards
klaus
Giuseppe Parlato wrote:
Hi.. I got the following error when I try to
start ser:
parse error (329,55-56): unknown command, missing loadmodule?
ERROR: bad config file (1 errors)
ser startup failed
so on my configuration file the problem is this here:
} else if ((method=="INVITE") & !check_from()) {
I was using ser 0.8.14 then upgraded to 0.9.6, but configuration file
has not been changed. The same file worked on 0.8.14 version.
help please
Giuseppe
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
23 Jul
23 Jul
10:16 a.m.
thanks.. after installing back version 0.8.14 now ser seems to be starting
correctly but actually, looking at active processes, I cannot find it. That
is why I think:
ser[32367]: ERROR: acc: can't get code for the Sip-Translated-Request-URI
attribute
dns ser[32367]: init_mod(): Error while initializing module acc
dns ser[32367]: WARNING:fm_free: free(0) called
here is acc module in my configuration file:
loadmodule "/usr/local/lib/ser/modules/acc.so"
...
modparam("acc", "log_fmt", "cdfimorstup")
modparam("acc", "log_level", 1)
modparam("acc", "failed_transactions", 1)
modparam("acc", "report_cancels", 1)
modparam("acc", "report_ack", 0)
modparam("acc", "radius_config",
"/usr/local/etc/radiusclient-ng/radiusclient.conf")
modparam("acc", "radius_flag", 2)
modparam("acc", "radius_missed_flag", 3)
if I comment #modparam("acc", "radius_config",
"/usr/local/etc/radiusclient-ng/radiusclient.conf") it starts.. why ????
Giuseppe
----- Original Message -----
From: "Andrey Kouprianov" <andrey.kouprianov(a)gmail.com>
To: <serusers(a)iptel.org>
Sent: Saturday, July 22, 2006 12:02 PM
Subject: Re: [Serusers] error configuration file
I think it's the check_from() that gives the error.
Check if you've
loaded uri_db.so module...
On 7/21/06, Klaus Darilion <klaus.mailinglists(a)pernau.at> wrote:
maybe && instead of & ?????
this error message also happens if you forget to close all if blocks
(watch out for missing '}' )
regards
klaus
Giuseppe Parlato wrote:
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: 21/07/2006
Hi.. I got the following error when I try to
start ser:
parse error (329,55-56): unknown command, missing loadmodule?
ERROR: bad config file (1 errors)
ser startup failed
so on my configuration file the problem is this here:
} else if ((method=="INVITE") & !check_from()) {
I was using ser 0.8.14 then upgraded to 0.9.6, but configuration file
has not been changed. The same file worked on 0.8.14 version.
help please
Giuseppe
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
11:37 a.m.
make sure acc.so is loaded before certain modules (dont remember which
ones exactly, but plz check the acc.so README file for dependencies).
it may also be that when you were downgrading back to 0.8.x, acc.so
was not removed properly. othrwise, i have no more ideas.
On 7/23/06, Giuseppe Parlato <gparlato(a)tnet.it> wrote:
thanks.. after installing back version 0.8.14 now ser
seems to be starting
correctly but actually, looking at active processes, I cannot find it. That
is why I think:
ser[32367]: ERROR: acc: can't get code for the Sip-Translated-Request-URI
attribute
dns ser[32367]: init_mod(): Error while initializing module acc
dns ser[32367]: WARNING:fm_free: free(0) called
here is acc module in my configuration file:
loadmodule "/usr/local/lib/ser/modules/acc.so"
...
modparam("acc", "log_fmt", "cdfimorstup")
modparam("acc", "log_level", 1)
modparam("acc", "failed_transactions", 1)
modparam("acc", "report_cancels", 1)
modparam("acc", "report_ack", 0)
modparam("acc", "radius_config",
"/usr/local/etc/radiusclient-ng/radiusclient.conf")
modparam("acc", "radius_flag", 2)
modparam("acc", "radius_missed_flag", 3)
if I comment #modparam("acc", "radius_config",
"/usr/local/etc/radiusclient-ng/radiusclient.conf") it starts.. why ????
Giuseppe
----- Original Message -----
From: "Andrey Kouprianov" <andrey.kouprianov(a)gmail.com>
To: <serusers(a)iptel.org>
Sent: Saturday, July 22, 2006 12:02 PM
Subject: Re: [Serusers] error configuration file
I think it's the check_from() that gives the
error. Check if you've
loaded uri_db.so module...
On 7/21/06, Klaus Darilion <klaus.mailinglists(a)pernau.at> wrote:
maybe && instead of & ?????
this error message also happens if you forget to close all if blocks
(watch out for missing '}' )
regards
klaus
Giuseppe Parlato wrote:
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: 21/07/2006
Hi.. I got the following error when I try to
start ser:
parse error (329,55-56): unknown command, missing loadmodule?
ERROR: bad config file (1 errors)
ser startup failed
so on my configuration file the problem is this here:
} else if ((method=="INVITE") & !check_from()) {
I was using ser 0.8.14 then upgraded to 0.9.6, but configuration file
has not been changed. The same file worked on 0.8.14 version.
help please
Giuseppe
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
8:11 p.m.
Before (0.8.14) in conf file uri_db.so was not loaded but everything worked
the same.
In my conf file I had: modparam("auth_db|domain|group|uri|usrloc",
"db_url",
"sql://serro:psw@xxx.xxx.xxx.xxx/ser"), but if I upgrade to 0.9.6 I get an
error on this line.
..I'm using freeradius
thanks
Giuseppe
----- Original Message -----
From: "Andrey Kouprianov" <andrey.kouprianov(a)gmail.com>
To: <serusers(a)iptel.org>
Sent: Saturday, July 22, 2006 12:02 PM
Subject: Re: [Serusers] error configuration file
I think it's the check_from() that gives the error.
Check if you've
loaded uri_db.so module...
On 7/21/06, Klaus Darilion <klaus.mailinglists(a)pernau.at> wrote:
maybe && instead of & ?????
this error message also happens if you forget to close all if blocks
(watch out for missing '}' )
regards
klaus
Giuseppe Parlato wrote:
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: 21/07/2006
Hi.. I got the following error when I try to
start ser:
parse error (329,55-56): unknown command, missing loadmodule?
ERROR: bad config file (1 errors)
ser startup failed
so on my configuration file the problem is this here:
} else if ((method=="INVITE") & !check_from()) {
I was using ser 0.8.14 then upgraded to 0.9.6, but configuration file
has not been changed. The same file worked on 0.8.14 version.
help please
Giuseppe
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
8:28 p.m.
If I unload uri.so and but I load uri_db.so I get the following error:
bind_dbmod: Module sql does not export db_use_table function
ERROR: mod_init(): Can't bind database module
init_mod(): Error while initializing module usrloc
WARNING:fm_free: free(0) called
However I dont get error no more on this line:
modparam("auth_db|domain|group|uri|usrloc", "db_url",
"sql://serro:psw@xxx.xxx.xxx.xxx/ser")
???
Giuseppe
----- Original Message -----
From: "Giuseppe Parlato" <gparlato(a)tnet.it>
To: "Andrey Kouprianov" <andrey.kouprianov(a)gmail.com>
Cc: <serusers(a)iptel.org>
Sent: Sunday, July 23, 2006 8:11 PM
Subject: Re: [Serusers] error configuration file
Before (0.8.14) in conf file uri_db.so was not loaded
but everything
worked the same.
In my conf file I had: modparam("auth_db|domain|group|uri|usrloc",
"db_url", "sql://serro:psw@xxx.xxx.xxx.xxx/ser"), but if I upgrade to
0.9.6 I get an error on this line.
..I'm using freeradius
thanks
Giuseppe
----- Original Message -----
From: "Andrey Kouprianov" <andrey.kouprianov(a)gmail.com>
To: <serusers(a)iptel.org>
Sent: Saturday, July 22, 2006 12:02 PM
Subject: Re: [Serusers] error configuration file
I think it's the check_from() that gives the
error. Check if you've
loaded uri_db.so module...
On 7/21/06, Klaus Darilion <klaus.mailinglists(a)pernau.at> wrote:
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: 21/07/2006
maybe && instead of & ?????
this error message also happens if you forget to close all if blocks
(watch out for missing '}' )
regards
klaus
Giuseppe Parlato wrote:
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date:
21/07/2006
Hi.. I got the following error when I try to
start ser:
parse error (329,55-56): unknown command, missing loadmodule?
ERROR: bad config file (1 errors)
ser startup failed
so on my configuration file the problem is this here:
} else if ((method=="INVITE") & !check_from()) {
I was using ser 0.8.14 then upgraded to 0.9.6, but configuration file
has not been changed. The same file worked on 0.8.14 version.
help please
Giuseppe
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
24 Jul
24 Jul
6:11 a.m.
Thing is, 0.8.14 doesnt have uri_db.so module (only uri.so), which was
introduced in version 0.9.x. That's why it would not work.
On 7/24/06, Giuseppe Parlato <gparlato(a)tnet.it> wrote:
If I unload uri.so and but I load uri_db.so I get the
following error:
bind_dbmod: Module sql does not export db_use_table function
ERROR: mod_init(): Can't bind database module
init_mod(): Error while initializing module usrloc
WARNING:fm_free: free(0) called
However I dont get error no more on this line:
modparam("auth_db|domain|group|uri|usrloc", "db_url",
"sql://serro:psw@xxx.xxx.xxx.xxx/ser")
???
Giuseppe
----- Original Message -----
From: "Giuseppe Parlato" <gparlato(a)tnet.it>
To: "Andrey Kouprianov" <andrey.kouprianov(a)gmail.com>
Cc: <serusers(a)iptel.org>
Sent: Sunday, July 23, 2006 8:11 PM
Subject: Re: [Serusers] error configuration file
Before (0.8.14) in conf file uri_db.so was not
loaded but everything
worked the same.
In my conf file I had: modparam("auth_db|domain|group|uri|usrloc",
"db_url", "sql://serro:psw@xxx.xxx.xxx.xxx/ser"), but if I upgrade
to
0.9.6 I get an error on this line.
..I'm using freeradius
thanks
Giuseppe
----- Original Message -----
From: "Andrey Kouprianov" <andrey.kouprianov(a)gmail.com>
To: <serusers(a)iptel.org>
Sent: Saturday, July 22, 2006 12:02 PM
Subject: Re: [Serusers] error configuration file
I think it's the check_from() that gives the
error. Check if you've
loaded uri_db.so module...
On 7/21/06, Klaus Darilion <klaus.mailinglists(a)pernau.at> wrote:
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: 21/07/2006
maybe && instead of & ?????
this error message also happens if you forget to close all if blocks
(watch out for missing '}' )
regards
klaus
Giuseppe Parlato wrote:
> Hi.. I got the following error when I try to start ser:
>
> parse error (329,55-56): unknown command, missing loadmodule?
> ERROR: bad config file (1 errors)
> ser startup failed
>
> so on my configuration file the problem is this here:
> } else if ((method=="INVITE") & !check_from()) {
>
> I was using ser 0.8.14 then upgraded to 0.9.6, but configuration file
> has not been changed. The same file worked on 0.8.14 version.
>
>
> help please
> Giuseppe
> _______________________________________________
> Serusers mailing list
> Serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date:
21/07/2006
6707
days inactive
6710
days old
7 comments
3 participants
participants (3)
-
Andrey Kouprianov -
Giuseppe Parlato -
Klaus Darilion