11 Jun
2008
11 Jun
'08
4:19 p.m.
Hi All
I did remove all the radius mods from the exclude section of the
Makefile. And I did enable radius in the Makefile of the acc module. All
compiled well howver when I try to load the acc module I get the
following error
ERROR:core:sr_load_module: could not open module
</usr/local/lib/openser/modules/acc.so>: libradiusclient-ng.so.2: cannot
open shared object file: No such file or directory
However the file in question can be found at
/usr/local/lib/libradiusclient-ng.so.2
With Regards
11 Jun
11 Jun
4:23 p.m.
On Wednesday 11 June 2008, Ali Jawad wrote:
I did remove all the radius mods from the exclude
section of the
Makefile. And I did enable radius in the Makefile of the acc module. All
compiled well howver when I try to load the acc module I get the
following error
ERROR:core:sr_load_module: could not open module
</usr/local/lib/openser/modules/acc.so>: libradiusclient-ng.so.2: cannot
open shared object file: No such file or directory
However the file in question can be found at
/usr/local/lib/libradiusclient-ng.so.2
Hi Ali,
perhaps this path is not included in your system library search path? Look
at /etc/ld.so.conf.
Henning
4:31 p.m.
Hi
Thank you for your help.
I did add the /usr/local/lib to the ld file and the excecuted ldconfig
but it responded with all kinds of errors. So I included the full path
of the radiusclient file and that gave the same result.
Any other ideas ?
-----Original Message-----
From: Henning Westerholt [mailto:henning.westerholt@1und1.de]
Sent: Wednesday, June 11, 2008 5:23 PM
To: users(a)lists.openser.org
Cc: Ali Jawad
Subject: Re: [OpenSER-Users] Error Compiling
On Wednesday 11 June 2008, Ali Jawad wrote:
I did remove all the radius mods from the exclude
section of the
Makefile. And I did enable radius in the Makefile of the acc module.
All
compiled well howver when I try to load the acc module
I get the
following error
ERROR:core:sr_load_module: could not open module
</usr/local/lib/openser/modules/acc.so>: libradiusclient-ng.so.2:
cannot
open shared object file: No such file or directory
However the file in question can be found at
/usr/local/lib/libradiusclient-ng.so.2
Hi Ali,
perhaps this path is not included in your system library search path?
Look
at /etc/ld.so.conf.
Henning
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
4:34 p.m.
On Wednesday 11 June 2008, Ali Jawad wrote:
Thank you for your help.
I did add the /usr/local/lib to the ld file and the excecuted ldconfig
but it responded with all kinds of errors. So I included the full path
of the radiusclient file and that gave the same result.
Any other ideas ?
The exact format of the configuration file/ directory is distribution
dependend i think, thus for the exact details you need to ask e.g. google.
Does 'ldconfig -v' list the correct directory and also the radius library?
Does a 'ldd /usr/local/lib/openser/modules/acc.so' shows the correct
depencencies resolved?
Cheers,
Henning
4:39 p.m.
Hi
I followed your steps and I was able to include it correctly now
[root@localhost openser-1.3.0-tls]# ldd
/usr/local/lib/openser/modules/acc.so
libradiusclient-ng.so.2 =>
/usr/local/lib/libradiusclient-ng.so.2 (0x0074e000)
libc.so.6 => /lib/tls/libc.so.6 (0x00906000)
libcrypt.so.1 => /lib/libcrypt.so.1 (0x0013d000)
libnsl.so.1 => /lib/libnsl.so.1 (0x0016b000)
/lib/ld-linux.so.2 (0x00221000)
I am getting this error
Jun 11 14:45:59 [26548] ERROR:core:version_control: module version
mismatch for /usr/local/lib/openser/modules/acc.so; core: openser
1.3.0-tls (i386/linux); module: openser 1.3.0-notls (i386/linux)
riginal Message-----
From: Henning Westerholt [mailto:henning.westerholt@1und1.de]
Sent: Wednesday, June 11, 2008 5:35 PM
To: Ali Jawad
Cc: users(a)lists.openser.org
Subject: Re: [OpenSER-Users] Error Compiling
On Wednesday 11 June 2008, Ali Jawad wrote:
Thank you for your help.
I did add the /usr/local/lib to the ld file and the excecuted ldconfig
but it responded with all kinds of errors. So I included the full path
of the radiusclient file and that gave the same result.
Any other ideas ?
The exact format of the configuration file/ directory is distribution
dependend i think, thus for the exact details you need to ask e.g.
google.
Does 'ldconfig -v' list the correct directory and also the radius
library?
Does a 'ldd /usr/local/lib/openser/modules/acc.so' shows the correct
depencencies resolved?
Cheers,
Henning
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
4:43 p.m.
On Wednesday 11 June 2008, Ali Jawad wrote:
I followed your steps and I was able to include it
correctly now
[root@localhost openser-1.3.0-tls]# ldd
/usr/local/lib/openser/modules/acc.so
libradiusclient-ng.so.2 =>
/usr/local/lib/libradiusclient-ng.so.2 (0x0074e000)
libc.so.6 => /lib/tls/libc.so.6 (0x00906000)
libcrypt.so.1 => /lib/libcrypt.so.1 (0x0013d000)
libnsl.so.1 => /lib/libnsl.so.1 (0x0016b000)
/lib/ld-linux.so.2 (0x00221000)
I am getting this error
Jun 11 14:45:59 [26548] ERROR:core:version_control: module version
mismatch for /usr/local/lib/openser/modules/acc.so; core: openser
1.3.0-tls (i386/linux); module: openser 1.3.0-notls (i386/linux)
Hi,
the ldd output looks good. :-) Now you have a version mismatch between your
openser binary and the acc module, you probably re-compiled and installed
only one of them. The easiest way to fix this should be to 'make install' the
server again.
Henning
6017
days inactive
6017
days old
5 comments
2 participants
participants (2)
-
Ali Jawad -
Henning Westerholt