That's exactly what I'm after! Thanks a lot. 2013-11-08 01:03 skrev Grant Bagdasarian: http://www.kamailio.org/wiki/cookbooks/4.0.x/pseudovariables [2] It contains a list of variables you can use inside the kamailio.cfg script. > > The modules page also provides a lot of information: http://www.kamailio.org/docs/modules/4.0.x/ [3] sr-users-bounces(a)lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] ON BEHALF OF erik(a)valerius.se sr-users(a)lists.sip-router.org logic for modifying auth and call requests? > > Hello everyone. Some of my confusion probably comes from me coming from the web development world and not software dev, but I would greatly appreciate any response to the following question: my subscribers which is working great. However, let's say that I add the column "valid_until" in the subscriber table and want to check if today's date is less than the caller's valid_until value. I can set up the sqlops module without a problem and get the actual value, but I have no idea where I place the logic to compare it to a date and then pass on the OK message to Kamailio to continue the request. with embedded scripts? Or right there in the config file? Where can I find a list of what parts of the call request are exposed for customization from Kamailio? Python or JavaScript, if that matters. Erik Eklund Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users [1] Links: ------ [1] http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users [2] http://www.kamailio.org/wiki/cookbooks/4.0.x/pseudovariables [3] http://www.kamailio.org/docs/modules/4.0.x/