Dear Bodgan I am using something like the below, I could be all wrong about this route[2] { # pstn handling, simply route out to pstn. xlog("L_INFO","rewritehostport to Splendor_VOIP_GW:5065"); sl_send_reply("Call Going To PSTN"); <===== I would like to send this to the Voip client display window. sethostport("xx.xx.xx.xx"); route(1); } -----Original Message----- From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Sent: Tuesday, February 05, 2008 5:52 PM To: Ali Jawad Cc: users(a)lists.openser.org Subject: Re: [OpenSER-Users] Sending Text Response from Openser to client Hi Ali, You are referring to the messages that are sent back from openser. Can you give an example of such messages (already existing)? Regards, Bogdan Ali Jawad wrote: ------------------------------------------------------------------------ -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

Iñaki Baz Castillo wrote: Exactly. There is nothing in the SIP specification(s) that says: If you send a message with this reason code and body, a "VoIP client" (what do you mean by that, exactly? A UAC?) will somehow "display" it. That is entirely an application-specific matter. Some clients doubtless implement this over a NOTIFY transport or what have you, but otherwise, that's not specified. -- Alex Balashov Evariste Systems Web : http://www.evaristesys.com/ Tel : (+1) (678) 954-0670 Direct : (+1) (678) 954-0671 Mobile : (+1) (706) 338-8599

Dear Bogdan Thank you for your support and Alex too, I understand that there is no standard way, but in this particular case your example worked. Thanks alot -----Original Message----- From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Sent: Wednesday, February 06, 2008 10:59 AM To: Ali Jawad Cc: users(a)lists.openser.org Subject: Re: [OpenSER-Users] Sending Text Response from Openser to client Hi Ali, unfortunately there is no standard way of sending test indications to the UAC. sl_send_reply() is for sending SIP replies to the UAC and not text indications. Some clients may display the text reason from the SIP reply, so you might try sending ("100","Call Going To PSTN" ), but it is up to the client to display. Regards, Bogdan Ali Jawad wrote: for box ------------------------------------------------------------------------ -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.