Are you using the rpm version? I think it does not fully support accounting. Maybe you have to compile from source and remember to uncomment "DEFS+=-DSQL_ACC" in the modules/acc/Makefile.

Zeus

-----Original Message----- From: serusers-bounces@lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of gaillac harry Sent: Friday, 23 April 2004 12:29 AM To: serusers@lists.iptel.org Subject: [Serusers] SERWEB+SER

Here is my ser.cfg.SER don't start because of acc module anybody could help me to solved this problem before an other ?

ser -c => 0(6238) set_mod_param_regex: parameter <db_url> not found in module <acc> 0(6238) parse error (96,60-61): Can't set module parameter 0(6238) set_mod_param_regex: parameter <db_missed_flag> not found in module <acc> 0(6238) parse error (97,36-37): Can't set module parameter 0(6238) parse error (195,63-64): unknown command, missing loadmodule?

ERROR: bad config file (3 errors)

regards

# # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script #

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode debug=9 fork=yes log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 listen=192.168.0.1 children=4 fifo="/tmp/ser_fifo" fifo_mode=0666 #alias="example.com"

# ------------------ module:wq loading

# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/msilo.so" loadmodule "/usr/lib/ser/modules/vm.so" loadmodule "/usr/lib/ser/modules/acc.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("usrloc", "db_mode", 1) #modparam("usrloc", "use_domain", 1)

# --register params-- modparam("registrar", "use_domain", 1)

# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# --domain module-- modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("domain", "db_mode", 1) modparam("domain", "domain_table", "domain") modparam("domain", "domain_col", "domain")

# --msilo params-- modparam("msilo", "registrar", "sip:registrar@example.com") modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser")

# --vm params-- modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser")

# --acc params-- modparam("acc", "log_level", 1) modparam("acc", "log_flag", 2) modparam("acc", "log_missed_flag", 2) modparam("acc", "log_fmt", "fimos") modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("acc", "db_missed_flag", 2)

# ------------------------- request routing logic -------------------

# main routing logic

route{

# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };

# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };

# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (is_from_local()) {

if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication if (!www_authorize("", "subscriber")) { www_challenge("", "0"); break; };

	save("location");
	m_dump();
	break;
};

# native SIP destinations are handled using our 

USRLOC DB lookup("aliases"); if (!lookup("location")) {

if (method == "MESSAGE") {
    		if (!t_newtran()) {
        			sl_reply_error();
        			break;
    			};

    	if (m_store("0")) {
        		t_reply("202", "Accepted for Later Delivery");
        			break;
    			};

  			 t_reply("503", "Service Unavailable");
    			break;
				};
	};

 			if ((method=="INVITE" || method=="ACK") 

&& t_newtran() ) { t_reply("404", "Not Found"); route(3); break; }; };

setflag(2); # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP t_on_failure("1"); # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };

}

route[3] {

# non-Voip -- just send "off-line" if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { sl_send_reply("404", "Not Found"); break; }; if (t_newtran()) { t_reply("404", "Not Found"); acc_db_request("404 missed call", "missed_calls");

		};

}

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers