Dear all,

I use SER 0.8.14, radiusclient 0.4.3 and remote radius server: freeradius 1.0.4. I want radius to do the authentication and accounting.

Now I can only receive acc start message and none stop message in /usr/local/var/log/radius/radacct/.. :

Mon Oct 3 16:10:22 2005 Acct-Status-Type = Start Service-Type = Sip-Session Sip-Response-Code = 200 Sip-Method = 1 User-Name = "41001@localhost.localdomain" Calling-Station-Id = "sip:41001@localhost.localdomain" Called-Station-Id = "sip:41002@localhost.localdomain" Sip-Translated-Request-URI = "sip:41002@202.204.118.219:5060" Acct-Session-Id = "D7046CD5-B8EB-4F17-A926-EE7F4A4C52FB@218.97.252.37" Sip-To-Tag = "523922641" Sip-From-Tag = "3394148029" Sip-Cseq = "9206" NAS-IP-Address = 218.97.252.34 NAS-Port = 5060 Acct-Delay-Time = 0 Client-IP-Address = 218.97.252.34 Acct-Unique-Session-Id = "3b5c2410e3d50ac7" Timestamp = 1128370222

How come? Did anyone know this problem?

Here is my ser.cfg:

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode */ #debug=7 #fork=no #log_stderror=yes /**/

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R)

listen=218.97.252.34

#port=5060 #children=4 fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so"

loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/group_radius.so" loadmodule "/usr/local/lib/ser/modules/uri_radius.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# -- acc params --

modparam("acc", "log_fmt", "cdfimorstup") modparam("acc", "early_media", 1) modparam("acc", "failed_transactions", 1) modparam("acc", "radius_missed_flag", 3) modparam("acc", "report_ack", 0) modparam("acc", "report_cancels", 1) modparam("acc", "radius_missed_flag", 3)

# set the reporting log level modparam("acc", "log_level", 1) # number of flag, which will be used for accounting; if a message is # labeled with this flag, its completion status will be reported modparam("acc", "radius_flag", 1 )

# ------------------------- request routing logic -------------------

# main routing logic

route{

# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { log(1,"LOG: Too many hops\n"); sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { log(1,"LOG: Message too big"); sl_send_reply("513", "Message too big"); break; };

# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) {

if (method=="BYE" || method=="CANCEL") { log (1, "BYE or CANCEL\n"); setflag(1); };

t_relay(); break; };

# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=~"localhost.localdomain") {

if (method=="REGISTER") {

log(1, "REGISTER: Authenticating user\n");

# Uncomment this if you want to use digest authentication if (!radius_www_authorize("localhost.localdomain")) { log(1, "REGISTER: challenging user\n"); www_challenge("localhost.localdomain", "0"); break; };

save("location"); break; };

if (method=="INVITE") {

log(1, "INVITE MESSAGE RECEIVED - START ACCOUNTING\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ };

if (method=="MESSAGE") { log(1, "MESSAGE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ };

if (method=="BYE" || method=="CANCEL") { log (1, "%method - STOP ACCOUNTING\n"); setflag(1); };

if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; };

setflag(3);

# forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };

}

Many thanks for your help!

Shuai