5 Mar
2008
5 Mar
'08
2:59 p.m.
Hi,
I want to setup two openser in a HA enviroment;
So, correct me if I'm wrong, I need three IP addresses, one for each box
and a shared one,
My question is, I have to set the
advertised_address= <shared-IP>
in both openser servers?
Thanks in advance,
Cosimo Fadda
*Ing. Cosimo Fadda
System Engineer
Klarya s.r.l.*
____
5 Mar
5 Mar
3:17 p.m.
El Wednesday 05 March 2008 12:59:12 Cosimo Fadda escribió:
Hi,
I want to setup two openser in a HA enviroment;
So, correct me if I'm wrong, I need three IP addresses, one for each box
and a shared one,
My question is, I have to set the
advertised_address= <shared-IP>
in both openser servers?
I don't think so since you will specifi the "listen" interfaces and
addresses
with parameters:
listen=udp:VIRTUAL_IP:5060
listen=tcp:VIRTUAL_IP:5060
--
Iñaki Baz Castillo
ibc(a)in.ilimit.es
4:04 p.m.
Thank you for the answer,
I' ve to make some tests, then I' ll giv e you the results,
Cosimo
Iñaki Baz Castillo ha scritto:
El Wednesday 05 March 2008 12:59:12 Cosimo Fadda
escribió:
--
________________________
Hi,
I want to setup two openser in a HA enviroment;
So, correct me if I'm wrong, I need three IP addresses, one for each box
and a shared one,
My question is, I have to set the
advertised_address= <shared-IP>
in both openser servers?
I don't think so since you will specifi the "listen" interfaces and
addresses
with parameters:
listen=udp:VIRTUAL_IP:5060
listen=tcp:VIRTUAL_IP:5060
6:41 p.m.
I did it the following way:
listen=<shared-IP>
alias=<FQDN of shared-IP>
alias=<local-IP>
Best regards
Peter
Cosimo Fadda schrieb:
Thank you for the answer,
I' ve to make some tests, then I' ll giv e you the results,
Cosimo
Iñaki Baz Castillo ha scritto:
El Wednesday 05 March 2008 12:59:12 Cosimo Fadda
escribió:
Hi,
I want to setup two openser in a HA enviroment;
So, correct me if I'm wrong, I need three IP addresses, one for each box
and a shared one,
My question is, I have to set the
advertised_address= <shared-IP>
in both openser servers?
I don't think so since you will specifi the "listen"
interfaces and addresses
with parameters:
listen=udp:VIRTUAL_IP:5060
listen=tcp:VIRTUAL_IP:5060
6:46 p.m.
El Wednesday 05 March 2008 16:41:49 Peter P GMX escribió:
I did it the following way:
listen=<shared-IP>
alias=<FQDN of shared-IP>
alias=<local-IP>
You don't need it in a HearBeat enviroment since the service (OpenSer) should
just be running in the active node and be swtiched off in the inactive node.
When HeartBeat activates a nodo it firsts enables the virutal/shared IP on it,
and later runs the services. So OpenSer just needs to know the virtual/shared
IP and not the "real" IP of each node.
Regards.
--
Iñaki Baz Castillo
ibc(a)in.ilimit.es
6:46 p.m.
Thank you,
I'll try it.
Best regards,
Cosimo
Peter P GMX ha scritto:
I did it the following way:
listen=<shared-IP>
alias=<FQDN of shared-IP>
alias=<local-IP>
Best regards
Peter
Cosimo Fadda schrieb:
--
________________________
Thank you for the answer,
I' ve to make some tests, then I' ll giv e you the results,
Cosimo
Iñaki Baz Castillo ha scritto:
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
El Wednesday 05 March 2008 12:59:12 Cosimo Fadda
escribió:
Hi,
I want to setup two openser in a HA enviroment;
So, correct me if I'm wrong, I need three IP addresses, one for each box
and a shared one,
My question is, I have to set the
advertised_address= <shared-IP>
in both openser servers?
I don't think so since you will specifi the "listen"
interfaces and addresses
with parameters:
listen=udp:VIRTUAL_IP:5060
listen=tcp:VIRTUAL_IP:5060
6088
days inactive
6088
days old
5 comments
3 participants
participants (3)
-
Cosimo Fadda -
Iñaki Baz Castillo -
Peter P GMX