Hello, I have this scenario: sip:newton@140.192.37.59----SER:140.192.37.59-------sip:einstein@140.192.37.59

This is the ngrep trace: interface: eth0 (140.192.37.0/255.255.255.0) filter: ip and ( port 5060 ) #Um 140.192.37.4:1162 -> 140.192.37.59:5060 INVITE sip:einstein@140.192.37.59 SIP/2.0..From: sip:newton@140.192.37.59;tag=1c26830..To: sip:einstein@140.192.37.59..Call-Id: call-1073 351340-11@140.192.37.4..Cseq: 1 INVITE..Contact: sip:newton@140.192.37.4..Content-Type: application/sdp..Content-Length: 306..Accept-La nguage: en..Allow: INVITE, ACK, CANCEL, BYE, REFER, OPTIONS, NOTIFY, REGISTER, SUBSCRIBE..Supported: sip-cc, sip-cc-01, timer, replaces.. User-Agent: Pingtel/2.1.11 (VxWorks)..Date: Tue, 06 Jan 2004 01:09:00 GMT..Via: SIP/2.0/UDP 140.192.37.4....v=0..o=Pingtel 5 5 IN IP4 140 .192.37.4..s=phone-call..c=IN IP4 140.192.37.4..t=0 0..m=audio 8766 RTP/AVP 96 97 0 8 18 98..a=rtpmap:96 eg711u/8000/1..a=rtpmap:97 eg711 a/8000/1..a=rtpmap:0 pcmu/8000/1..a=rtpmap:8 pcma/8000/1..a=rtpmap:18 g729/8000/1..a=fmtp:18 annexb=no..a=rtpmap:98 telephone-event/8000/ 1..

#U 140.192.37.59:5060 -> 140.192.37.4:5060 SIP/2.0 100 trying -- your call is important to us..From: sip:newton@140.192.37.59;tag=1c26830..To: sip:einstein@140.192.37.59..Call-Id: call-1073351340-11@140.192.37.4..Cseq: 1 INVITE..Via: SIP/2.0/UDP 140.192.37.4..Server: Sip EXpress router (0.8.11 (i386/linux))..Content -Length: 0..Warning: 392 140.192.37.59:5060 "Noisy feedback tells: pid=2365 req_src_ip=140.192.37.4 req_src_port=1162 in_uri=sip:einstei n@140.192.37.59 out_uri=sip:einstein@140.192.37.59 via_cnt==1"....

#U 140.192.37.59:5060 -> 140.192.37.4:5060 SIP/2.0 483 Too Many Hops..From: sip:newton@140.192.37.59;tag=1c26830..To: sip:einstein@140.192.37.59;tag=b27e1a1d33761e85846fc98f5f3a7e5 8.1007..Call-Id: call-1073351340-11@140.192.37.4..Cseq: 1 INVITE..Via: SIP/2.0/UDP 140.192.37.4..Server: Sip EXpress router (0.8.11 (i386 /linux))..Content-Length: 0..Warning: 392 140.192.37.59:5060 "Noisy feedback tells: pid=2365 req_src_ip=140.192.37.59 req_src_port=5060 in_uri=sip:einstein@140.192.37.59 out_uri=sip:einstein@140.192.37.59 via_cnt==12"....

#U 140.192.37.4:1162 -> 140.192.37.59:5060 ACK sip:einstein@140.192.37.59 SIP/2.0..Contact: sip:newton@140.192.37.4..From: sip:newton@140.192.37.59;tag=1c26830..To: sip:einstein@14 0.192.37.59;tag=b27e1a1d33761e85846fc98f5f3a7e58.1007..Call-Id: call-1073351340-11@140.192.37.4..Cseq: 1 ACK..Accept-Language: en..User-A gent: Pingtel/2.1.11 (VxWorks)..Date: Tue, 06 Jan 2004 01:09:00 GMT..Via: SIP/2.0/UDP 140.192.37.4..Content-Length: 0.... exit 4 received, 0 dropped

The ser gives #U 140.192.37.59:5060 -> 140.192.37.4:5060 SIP/2.0 483 Too Many Hops..From: sip:newton@140.192.37.59;tag=1c26830..To: sip:einstein@140.192.37.59;tag=b27e1a1d33761e85846fc98f5f3a7e5

Here is my ser.cfg file: # # $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $ # # simple quick-start config script #

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" alias=140.192.37.59 alias=mnlab.cti.depaul.edu # ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# ------------------------- request routing logic -------------------

# main routing logic

route{

# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; };

# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };

# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=="mnlab.cti.depaul.edu") {

if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication if (!www_authorize("mnlab.cti.depaul.edu", "subscriber")) { www_challenge("mnlab.cti.depaul.edu", "0"); break; };

save("location"); break; };

# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };

}

I have exported SIP_DOMAIN=mnlab.cti.depaul.edu I have added alias=mnlab.cti.depaul.edu in the ser.cfg file at /etc/ser/ser.cfg

When the caller is newton/einstein and the callee is einstein/newton respectively and i try to use the url based dialing it gives an engaged tone. Please help.

-Darshan

----Original Message Follows---- From: Jan Janak jan@iptel.org To: Darshan Uka ukadarshan_2001@hotmail.com CC: serusers@lists.iptel.org Subject: Re: [Serusers] Re:SER Date: Sun, 4 Jan 2004 01:28:06 +0100 MIME-Version: 1.0 Received: from fox.iptel.org ([195.37.77.101]) by mc12-f26.hotmail.com with Microsoft SMTPSVC(5.0.2195.6713); Sat, 3 Jan 2004 16:30:18 -0800 Received: from localhost.localdomain (fox.iptel.org [195.37.77.101])by fox.iptel.org (Postfix) with SMTPid 02A29BDA4; Sun, 4 Jan 2004 01:27:30 +0100 (CET) Received: by localhost.localdomain (sSMTP sendmail emulation); Sun, 4 Jan 2004 01:28:07 +0100 X-Message-Info: JGTYoYF78jEnGRiKb45R4ZRFHM/M/kHU Message-ID: 20040104002806.GC1247@localhost.localdomain Mail-Followup-To: Darshan Uka ukadarshan_2001@hotmail.com,serusers@lists.iptel.org References: Law11-F121ku04koK5u00011c2d@hotmail.com In-Reply-To: Law11-F121ku04koK5u00011c2d@hotmail.com User-Agent: Mutt/1.5.4i Return-Path: jan@iptel.org X-OriginalArrivalTime: 04 Jan 2004 00:30:18.0930 (UTC) FILETIME=[EE59F120:01C3D259]

The message looped on the server until max-forwards check hits. The Request-URI of the REGISTER message (sip:140.192.37.59 in this case) is considered as foreign by the server and simply forwarded, but because it is not foreign it hits the same server again.

If you are using the default script then it means that the condition if (uri==myself) doesn't match that IP address.

Jan.

On 04-01 00:19, Darshan Uka wrote:

Hello Jan, I tried to register using sipsak with the ser but couldn't: [brewster@localhost brewster]$ sipsak -U -I -e 5 -s

sip:4444@140.192.37.59

-vv warning: redirects are not expected in USRLOC. disableing registering user 44440... received: SIP/2.0 483 Too Many Hops Via: SIP/2.0/UDP localhost.localdomain:32784;received=140.192.37.59 From: sip:44440@140.192.37.59 To: sip:44440@140.192.37.59;tag=b27e1a1d33761e85846fc98f5f3a7e58.44dc Call-ID: 2034451172@localhost.localdomain CSeq: 1 REGISTER Server: Sip EXpress router (0.8.11 (i386/linux)) Content-Length: 0 Warning: 392 140.192.37.59:5060 "Noisy feedback tells: pid=2262 req_src_ip=140.192.37.59 req_src_port=5060 in_uri=sip:140.192.37.59 out_uri=sip:140.192.37.59 via_cnt==71"

error: didn't received '200 OK' on register (see above). aborting What could be the reason for this? Thanks, -Darshan

----Original Message Follows---- From: Jan Janak jan@iptel.org To: Darshan Uka ukadarshan_2001@hotmail.com CC: serusers@lists.iptel.org Subject: Re: [Serusers] Re:SER Date: Sat, 3 Jan 2004 19:50:11 +0100 MIME-Version: 1.0 Received: from fox.iptel.org ([195.37.77.101]) by mc5-f6.hotmail.com with Microsoft SMTPSVC(5.0.2195.6713); Sat, 3 Jan 2004 10:52:22 -0800 Received: from localhost.localdomain (fox.iptel.org [195.37.77.101])by fox.iptel.org (Postfix) with SMTPid 8511EBDA3; Sat, 3 Jan 2004 19:49:35 +0100 (CET) Received: by localhost.localdomain (sSMTP sendmail emulation); Sat, 3

Jan

2004 19:50:11 +0100 X-Message-Info: JGTYoYF78jHCUrdF36ytC88bjJA8hXfX Message-ID: 20040103185011.GS556@localhost.localdomain Mail-Followup-To: Darshan Uka ukadarshan_2001@hotmail.com,serusers@lists.iptel.org References: Law11-F1133VLnjJeDY0000b77c@hotmail.com In-Reply-To: Law11-F1133VLnjJeDY0000b77c@hotmail.com User-Agent: Mutt/1.5.4i Return-Path: jan@iptel.org X-OriginalArrivalTime: 03 Jan 2004 18:52:22.0934 (UTC) FILETIME=[B8EA7B60:01C3D22A]

Hard to say, maybe you:

-- listen on a different interface -- listen on a different host -- filter out port 5060 so SIP messages do not appear in your dumps -- phones do not send any SIP messages -- phones send SIP messages to a different host

etc...

Jan.

On 01-01 00:12, Darshan Uka wrote:

...

Hi, I am totally new to SER. I have installed it and have the following set up: pingtel phone --- SER ----- pingtel phone I somehow dont see the sip headers in the tcpdump/trace. Any suggestions. Thanks,

-Darshan

---

Get reliable dial-up Internet access now with our limited-time

introductory

...

offer. http://join.msn.com/?page=dept/dialup

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

---

Worried about inbox overload? Get MSN Extra Storage now! http://join.msn.com/?PAGE=features/es

_________________________________________________________________ Expand your wine savvy — and get some great new recipes — at MSN Wine. http://wine.msn.com