Hi, I have problem with CPL. This is my config file for openser: debug=3 # debug level (cmd line: -dddddddddd) fork=yes # Set to no to enter debugging mode log_stderror=no # (cmd line: -E) Set to yes to enter debugging mode check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" # # uncomment the following lines for TLS support #disable_tls = 0 #listen = tls:your_IP:5061 #tls_verify = 1 #tls_require_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/build/buildd/openser-1.1.0/debian/openser/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/build/buildd/openser-1.1.0/debian/openser/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/build/buildd/openser-1.1.0/debian/openser/etc/openser/tls/user/user-calist.pem" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database # mysql.so must be loaded ! loadmodule "/usr/lib/openser/modules/mysql.so" loadmodule "/usr/lib/openser/modules/sl.so" loadmodule "/usr/lib/openser/modules/tm.so" loadmodule "/usr/lib/openser/modules/rr.so" loadmodule "/usr/lib/openser/modules/maxfwd.so" loadmodule "/usr/lib/openser/modules/usrloc.so" loadmodule "/usr/lib/openser/modules/registrar.so" loadmodule "/usr/lib/openser/modules/textops.so" #cpl modul -- dopisali sme tu my !!!!!! loadmodule "/usr/lib/openser/modules/cpl-c.so" # Uncomment this if you want digest authentication #loadmodule "/usr/lib/openser/modules/auth.so" #loadmodule "/usr/lib/openser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) #---CPL-C Parameter modparam("cpl-c","db_url","mysql://openser:ser@localhost/openser") modparam("cpl-c","cpl_table","cpl") modparam("cpl-c","cpl_dtd_file","/etc/openser/cpl-06.dtd") modparam("cpl-c","log_dir","/var/log/openser/cpl") #modparam("cpl-c","proxy_recurse",2) #modparam("cpl-c","proxy_route",0) #modparam("cpl-c","nat_flag",6) modparam("cpl-c","lookup_domain","location") #cpl_run_script("incoming","force_statefull") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~&quot;(a)tls_domain1.net&quot;) { # t_relay("tls:domain1.net"); # exit; #} else if(uri=~&quot;(a)tls_domain2.net&quot;) { # t_relay("tls:domain2.net"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication #if (!www_authorize("openser.org", "subscriber")) { # www_challenge("openser.org", "0"); # exit; #}; cpl_process_register(); save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; and this is easy cpl script: <?xml version="1.0" encoding="UTF-8"?> <cpl> <incoming> <reject status="400" reason="Busy" /> </incoming> </cpl> Upload of this cpl script to DB is correct, record in table "cpl" is created for "user" but when I am calling to this "user", openser ignores this script and phone is ringing. I don't know what is problem, could somebody help me? thanks Martin -- View this message in context: http://www.nabble.com/Ignore-CPL-script-tp14438450p14438450.html Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.