Hi Daniel.
I just wanted to hear if you have had any time to look at the Kamailio Dispatcher <-> FreeSwitch problem?
This is NOT to rush you. I've followed the mailing list and can see how busy you are and how much involved you are in all this, so I fully respect all the help you give to this mailing list etc.
Best regards, Henrik
2011/10/20 Henrik Aagaard Sørensen henrikaagaardsorensen@gmail.com
Hi Daniel.
I've just upgraded to 3.2.0.
This is my NEW kamailio.cfg: http://pastebin.com/XzXjf1VY This is my dispatcher.list: http://pastebin.com/9dLS8243
I've also attached a ngrep where it errors with "Too many hops" with the new version 3.2.0.
Once again, I really appreciate all the help you give! It's remarkable with your effort in this.
Best regards, Henrik
2011/10/17 Daniel-Constantin Mierla miconda@gmail.com
I will try to look over the sip traces you sent, although it is tight schedule for the 3.2.0 right now -- so it may take few days.
Cheers, Daniel
On 10/14/11 10:07 PM, Henrik Aagaard Sørensen wrote:
Yes, pbx.my-domain.com is pointing to the IP of FreeSwitch. sip.my-domain.com is the domain name for Kamailio.
2011/10/14 Daniel-Constantin Mierla miconda@gmail.com
On 10/14/11 7:06 PM, Henrik Aagaard Sørensen wrote:
My dispatcher.list currently just contains: 1 pbx.my-domain.com:5060
Is pbx.my-domain.com pointing to the IP address of freeswitch? What is the domain name for kamailio ip address?
Daniel
I will provide a ngrep trace within an hour or two. Thank you so much for helping me. I really hope to get this solved.
2011/10/14 Daniel-Constantin Mierla miconda@gmail.com
Hello,
On 10/14/11 4:48 PM, Henrik Aagaard Sørensen wrote:
Hi Daniel (and everyone else) again.
I've just tried to add: loadmodule "path.so" modparam("path", "use_received", 1)
and: add_path_received() just before the "if(!t_relay())..." in the ROUTE part.
That made both devices get the error "Too many loops".
what is the content of the dispatcher list file? Maybe is better to use ds_select_domain(...) and ds_next_domain() -- cannot say it since I haven't seen full sip trace, but maybe the problem is that freeswitch is sending back if the r-uri address is kamailio's address.
Cheers, Daniel
Moving the add_path_received() into the part: if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); add_path_received(); made the same issues as before loading the path.so module.
2011/10/14 Henrik Aagaard Sørensen henrikaagaardsorensen@gmail.com
Hi Daniel (and everyone else).
This is a tshark trace (is that as good as ngrep?) from Kamailio when there are too many loops: http://pastebin.com/yRjduB0s In this trace I got the note that 253 packets was dropped (and therefor not in the trace).
And this is a trace when it times out: http://pastebin.com/KT0bJzEU
I've actually looked at the PATH module, and tried several things. And I know this type of question is rather newbee-like, but can you help me out with the PATH module and how to integrate it correctly?
I really do appreciate all the help!
2011/10/14 Daniel-Constantin Mierla miconda@gmail.com
Hello,
when using the load balancer in front of the registrar, you have to use PATH extensions for SIP (see path module in kamailio) in order to be able to cope with nat.
Then, what would be helpful, will be a ngrep trace taken on kamailio server for failed calls.
Cheers, Daniel
On 10/14/11 4:13 PM, Henrik Aagaard Sørensen wrote:
I've asked a lot of question about Kamailio Dispatcher in front of FreeSwitch in this mailing list. So I'm sorry that I'm still "spamming", but it still fails.
This is my status so far.
When connecting 2 devices directly to FreeSwitch everything works. When connecting to Kamailio, some calls fails with "Timeout" and some fails with "Too many loops".
This is my kamailio.cfg: http://pastebin.com/KEuZmikh
When connected directly to FreeSwitch where everything works, this is how my clients are registrered in FreeSwitch: http://pastebin.com/prkjkb7g
When connected to Kamailio where nothing works, this is how my clients are registrered in FreeSwitch: http://pastebin.com/b5x6NZyv
215.197.145.132 (sip.my-domain.com) is my Kamailio. pbx.my-domain.com is my FreeSwitch. 96.224.14.164 is my IP at home, where my 2 devices are from.
Can anyone help me out? I'm kinda lost at this point.
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kathttp://linkedin.com/in/miconda -- http://twitter.com/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kathttp://linkedin.com/in/miconda -- http://twitter.com/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kathttp://linkedin.com/in/miconda -- http://twitter.com/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kathttp://linkedin.com/in/miconda -- http://twitter.com/miconda
Hello,
sorry, haven't actually got to look deep at it, but I updated the config file in the dispatcher readme (had in mind to ping you about it, but got out of office meanwhile) -- that maybe it will help you:
http://kamailio.org/docs/modules/stable/modules_k/dispatcher.html#id2523004
Should be like full config for load balancing with round robin policy, doing failover routing in case of server error or no reply from gateways (e.g., freeswitch). Either try with that config or try to figure out what you need to plug in your config.
Let me know if works this time.
Cheers, Daniel
On 11/9/11 12:18 AM, Henrik Aagaard Sørensen wrote:
Hi Daniel.
I just wanted to hear if you have had any time to look at the Kamailio Dispatcher <-> FreeSwitch problem?
This is NOT to rush you. I've followed the mailing list and can see how busy you are and how much involved you are in all this, so I fully respect all the help you give to this mailing list etc.
Best regards, Henrik
2011/10/20 Henrik Aagaard Sørensen <henrikaagaardsorensen@gmail.com mailto:henrikaagaardsorensen@gmail.com>
Hi Daniel. I've just upgraded to 3.2.0. This is my NEW kamailio.cfg: http://pastebin.com/XzXjf1VY This is my dispatcher.list: http://pastebin.com/9dLS8243 I've also attached a ngrep where it errors with "Too many hops" with the new version 3.2.0. Once again, I really appreciate all the help you give! It's remarkable with your effort in this. Best regards, Henrik 2011/10/17 Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> I will try to look over the sip traces you sent, although it is tight schedule for the 3.2.0 right now -- so it may take few days. Cheers, Daniel On 10/14/11 10:07 PM, Henrik Aagaard Sørensen wrote:Yes, pbx.my-domain.com <http://pbx.my-domain.com> is pointing to the IP of FreeSwitch. sip.my-domain.com <http://sip.my-domain.com> is the domain name for Kamailio. 2011/10/14 Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> On 10/14/11 7:06 PM, Henrik Aagaard Sørensen wrote:My dispatcher.list currently just contains: 1 pbx.my-domain.com:5060 <http://pbx.my-domain.com:5060>Is pbx.my-domain.com <http://pbx.my-domain.com> pointing to the IP address of freeswitch? What is the domain name for kamailio ip address? DanielI will provide a ngrep trace within an hour or two. Thank you so much for helping me. I really hope to get this solved. 2011/10/14 Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> Hello, On 10/14/11 4:48 PM, Henrik Aagaard Sørensen wrote:Hi Daniel (and everyone else) again. I've just tried to add: loadmodule "path.so" modparam("path", "use_received", 1) and: add_path_received() just before the "if(!t_relay())..." in the ROUTE part. That made both devices get the error "Too many loops".what is the content of the dispatcher list file? Maybe is better to use ds_select_domain(...) and ds_next_domain() -- cannot say it since I haven't seen full sip trace, but maybe the problem is that freeswitch is sending back if the r-uri address is kamailio's address. Cheers, DanielMoving the add_path_received() into the part: if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); add_path_received(); made the same issues as before loading the path.so module. 2011/10/14 Henrik Aagaard Sørensen <henrikaagaardsorensen@gmail.com <mailto:henrikaagaardsorensen@gmail.com>> Hi Daniel (and everyone else). This is a tshark trace (is that as good as ngrep?) from Kamailio when there are too many loops: http://pastebin.com/yRjduB0s In this trace I got the note that 253 packets was dropped (and therefor not in the trace). And this is a trace when it times out: http://pastebin.com/KT0bJzEU I've actually looked at the PATH module, and tried several things. And I know this type of question is rather newbee-like, but can you help me out with the PATH module and how to integrate it correctly? I really do appreciate all the help! 2011/10/14 Daniel-Constantin Mierla <miconda@gmail.com <mailto:miconda@gmail.com>> Hello, when using the load balancer in front of the registrar, you have to use PATH extensions for SIP (see path module in kamailio) in order to be able to cope with nat. Then, what would be helpful, will be a ngrep trace taken on kamailio server for failed calls. Cheers, Daniel On 10/14/11 4:13 PM, Henrik Aagaard Sørensen wrote:I've asked a lot of question about Kamailio Dispatcher in front of FreeSwitch in this mailing list. So I'm sorry that I'm still "spamming", but it still fails. This is my status so far. When connecting 2 devices directly to FreeSwitch everything works. When connecting to Kamailio, some calls fails with "Timeout" and some fails with "Too many loops". This is my kamailio.cfg: http://pastebin.com/KEuZmikh When connected directly to FreeSwitch where everything works, this is how my clients are registrered in FreeSwitch: http://pastebin.com/prkjkb7g When connected to Kamailio where nothing works, this is how my clients are registrered in FreeSwitch: http://pastebin.com/b5x6NZyv 215.197.145.132 (sip.my-domain.com <http://sip.my-domain.com>) is my Kamailio. pbx.my-domain.com <http://pbx.my-domain.com> is my FreeSwitch. 96.224.14.164 is my IP at home, where my 2 devices are from. Can anyone help me out? I'm kinda lost at this point. _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users-- Daniel-Constantin Mierla --http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin:http://asipto.com/u/kat http://linkedin.com/in/miconda -- http://twitter.com/miconda _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users-- Daniel-Constantin Mierla --http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin:http://asipto.com/u/kat http://linkedin.com/in/miconda -- http://twitter.com/miconda _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users-- Daniel-Constantin Mierla --http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin:http://asipto.com/u/kat http://linkedin.com/in/miconda -- http://twitter.com/miconda _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users-- Daniel-Constantin Mierla --http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin:http://asipto.com/u/kat http://linkedin.com/in/miconda -- http://twitter.com/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi Daniel.
Thank you for your link.
Unfortunately it still either reports "Too many hops" or "Timeout". Again, everything works when connecting directly to the PBX.
2011/11/9 Daniel-Constantin Mierla miconda@gmail.com
Hello,
sorry, haven't actually got to look deep at it, but I updated the config file in the dispatcher readme (had in mind to ping you about it, but got out of office meanwhile) -- that maybe it will help you:
http://kamailio.org/docs/modules/stable/modules_k/dispatcher.html#id2523004
Should be like full config for load balancing with round robin policy, doing failover routing in case of server error or no reply from gateways (e.g., freeswitch). Either try with that config or try to figure out what you need to plug in your config.
Let me know if works this time.
Cheers, Daniel
On 11/9/11 12:18 AM, Henrik Aagaard Sørensen wrote:
Hi Daniel.
I just wanted to hear if you have had any time to look at the Kamailio Dispatcher <-> FreeSwitch problem?
This is NOT to rush you. I've followed the mailing list and can see how busy you are and how much involved you are in all this, so I fully respect all the help you give to this mailing list etc.
Best regards, Henrik
2011/10/20 Henrik Aagaard Sørensen henrikaagaardsorensen@gmail.com
Hi Daniel.
I've just upgraded to 3.2.0.
This is my NEW kamailio.cfg: http://pastebin.com/XzXjf1VY This is my dispatcher.list: http://pastebin.com/9dLS8243
I've also attached a ngrep where it errors with "Too many hops" with the new version 3.2.0.
Once again, I really appreciate all the help you give! It's remarkable with your effort in this.
Best regards, Henrik
2011/10/17 Daniel-Constantin Mierla miconda@gmail.com
I will try to look over the sip traces you sent, although it is tight schedule for the 3.2.0 right now -- so it may take few days.
Cheers, Daniel
On 10/14/11 10:07 PM, Henrik Aagaard Sørensen wrote:
Yes, pbx.my-domain.com is pointing to the IP of FreeSwitch. sip.my-domain.com is the domain name for Kamailio.
2011/10/14 Daniel-Constantin Mierla miconda@gmail.com
On 10/14/11 7:06 PM, Henrik Aagaard Sørensen wrote:
My dispatcher.list currently just contains: 1 pbx.my-domain.com:5060
Is pbx.my-domain.com pointing to the IP address of freeswitch? What is the domain name for kamailio ip address?
Daniel
I will provide a ngrep trace within an hour or two. Thank you so much for helping me. I really hope to get this solved.
2011/10/14 Daniel-Constantin Mierla miconda@gmail.com
Hello,
On 10/14/11 4:48 PM, Henrik Aagaard Sørensen wrote:
Hi Daniel (and everyone else) again.
I've just tried to add: loadmodule "path.so" modparam("path", "use_received", 1)
and: add_path_received() just before the "if(!t_relay())..." in the ROUTE part.
That made both devices get the error "Too many loops".
what is the content of the dispatcher list file? Maybe is better to use ds_select_domain(...) and ds_next_domain() -- cannot say it since I haven't seen full sip trace, but maybe the problem is that freeswitch is sending back if the r-uri address is kamailio's address.
Cheers, Daniel
Moving the add_path_received() into the part: if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); add_path_received(); made the same issues as before loading the path.so module.
2011/10/14 Henrik Aagaard Sørensen henrikaagaardsorensen@gmail.com
Hi Daniel (and everyone else).
This is a tshark trace (is that as good as ngrep?) from Kamailio when there are too many loops: http://pastebin.com/yRjduB0s In this trace I got the note that 253 packets was dropped (and therefor not in the trace).
And this is a trace when it times out: http://pastebin.com/KT0bJzEU
I've actually looked at the PATH module, and tried several things. And I know this type of question is rather newbee-like, but can you help me out with the PATH module and how to integrate it correctly?
I really do appreciate all the help!
2011/10/14 Daniel-Constantin Mierla miconda@gmail.com
> Hello, > > when using the load balancer in front of the registrar, you have to > use PATH extensions for SIP (see path module in kamailio) in order to be > able to cope with nat. > > Then, what would be helpful, will be a ngrep trace taken on kamailio > server for failed calls. > > Cheers, > Daniel > > > On 10/14/11 4:13 PM, Henrik Aagaard Sørensen wrote: > > I've asked a lot of question about Kamailio Dispatcher in front of > FreeSwitch in this mailing list. So I'm sorry that I'm still "spamming", > but it still fails. > > This is my status so far. > > When connecting 2 devices directly to FreeSwitch everything works. > When connecting to Kamailio, some calls fails with "Timeout" and some fails > with "Too many loops". > > This is my kamailio.cfg: http://pastebin.com/KEuZmikh > > When connected directly to FreeSwitch where everything works, this > is how my clients are registrered in FreeSwitch: > http://pastebin.com/prkjkb7g > > When connected to Kamailio where nothing works, this is how my > clients are registrered in FreeSwitch: http://pastebin.com/b5x6NZyv > > 215.197.145.132 (sip.my-domain.com) is my Kamailio. > pbx.my-domain.com is my FreeSwitch. > 96.224.14.164 is my IP at home, where my 2 devices are from. > > Can anyone help me out? I'm kinda lost at this point. > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > -- > Daniel-Constantin Mierla -- http://www.asipto.com > Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kathttp://linkedin.com/in/miconda -- http://twitter.com/miconda > >
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kathttp://linkedin.com/in/miconda -- http://twitter.com/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kathttp://linkedin.com/in/miconda -- http://twitter.com/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kathttp://linkedin.com/in/miconda -- http://twitter.com/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- http://www.asipto.com Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kathttp://linkedin.com/in/miconda -- http://twitter.com/miconda
-
Daniel-Constantin Mierla -
Henrik Aagaard Sørensen