Hi everybody,

need some help on nattraversal.

i use a multihomed SER, one private IP & one public IP.

MyUA(privateIP) <-> (privateIP)SER(publicIP) <-> UA-(VoIP - Provider, pubicIP)

If i try to make a call from private net to public net, SER doesnt change the contact address. He changes the sdp - connection field but he, puts in the wrong IP - address. Instead o writing down his public IP, SER writes his private IP. Then SER forwards the call on his public interface to the provider, which will get wrong Contact & SDP information.

After reviewing my logs i saw that SER does the nat_uac_test, but the fix_nat_contact & fix_sdp dont work dont do what they should do :)

Here are the important bits of my config:

fork=yes log_stderror=no

mhomed=1 listen=10.x.x.x listen=193.x.x.x

loadmodule "/usr/lib/ser/modules/nathelper.so" modparam("usrloc", "db_mode", 0)

modparam("registrar", "nat_flag", 6) modparam("nathelper", "natping_interval", 30) # Ping interval 30 s modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT

if (nat_uac_test("3")) {

if (method == "REGISTER" || ! search("^Record-Route:")) { log(2,"LOG: Someone trying to register from private IP, rewriting\n");

fix_nated_contact(); # Rewrite contact with source IP of signalling if (method == "INVITE") { fix_nated_sdp("1"); # Add direction=active to SDP }; force_rport(); # Add rport parameter to topmost Via setflag(6); # Mark as NATed }; };

... and so on.

______________________________________________________________ Verschicken Sie romantische, coole und witzige Bilder per SMS! Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193