Hello,
On 9/12/11 4:14 PM, neili ma wrote:
Hello,
Thanks a lot for your advice, I found and solved the problem thanks to
the debugger, actually the problem was with
modparam("auth_db",
"db_url","mysql://openser:openserrw@localhost/openser")
I just had to change localhost to my locationserver IP and the problem
was solved :), thanks again.
good that you find it. Don't forget to cc the mailing list always so
people reading the thread (archive later) see the conclusion -- it can
help many others running on same situation.
Cheers,
Daniel
Sincerely,
Neili
2011/9/12 Daniel-Constantin Mierla <miconda(a)gmail.com
<mailto:miconda@gmail.com>>
Hello,
you have another group of actions that can send 401 Unauthorized:
if (!check_to()) {
sl_send_reply("401", "Unauthorized");
exit;
}
You can either run with debug=4 and watch the syslog to see some
hints in messages where it fires this 401, or use debugger module
with cfgtrace option set and you see the execution path of the
config in the logs.
If you send here the ngrep of such REGISTER and the reply we can
spot what could be the situation for 401.
Cheers,
Daniel
On 9/11/11 9:18 PM, neili ma wrote:
Hello sr-users,
I'm new using kamailio open source, and I would like to ask for help.
My version is 3.1.4 and I am trying to configure 3 servers, one
with proxy, one with registrar and one with location server.
My problem is when I try to send a register message it returns an
error "401 Unauthorized", I know the error is in the fuction
www_authorize("10.254.239.7", "subscriber") but I don't know
how
to solve it, for me it seems correct the parameters.
Below I have attatched the proxy and registrar relevant route
code for my problem, and the IPs for proxy an registrar are:
10.254.239.7-----------10.254.239.8
If someone can help me, I will be gratefull. Thanks in advance.
####REGISTRAR CODE
route{
# initial sanity checks -- too long messages
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
exit;
};
if (!uri==myself) {
sl_send_reply("400", "Bad destination, only
register messages de$
exit;
};
# the only valid message for the registrar is the register
message
# other messages are answered with an error message
if (uri==myself) {
if (method=="REGISTER") {
sl_send_reply("100", "Trying");
if (!www_authorize("10.254.239.7", "subscriber"))
{
www_challenge("10.254.239.7", "1");
exit;
};
if (!check_to()) {
sl_send_reply("401", "Unauthorized");
exit;
};
consume_credentials();
if(!save("location")) {
sl_reply_error();
};
exit;
} else {
sl_send_reply("403", "Forbidden");
exit;
};
};
}
#########PROXY CODE
if (method=="ACK") {
route(1);
exit;
} if (method=="INVITE") {
route(3);
exit;
} else if (method=="REGISTER") {
route(2);
exit;
};
lookup("aliases");
if (!uri==myself) {
route(1);
};
route[2] {
#rewrinting the host allows the registrar to know that the
message is de$
rewritehost("10.254.239.8");
if(!t_relay()) {
sl_reply_error();
};
exit;
}
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla --http://www.asipto.com
Kamailio Advanced Training, Oct 10-13,
Berlin:http://asipto.com/u/kat
http://linkedin.com/in/miconda --
http://twitter.com/miconda
--
Daniel-Constantin Mierla --
http://www.asipto.com
Kamailio Advanced Training, Oct 10-13, Berlin:
http://asipto.com/u/kat
http://linkedin.com/in/miconda --
http://twitter.com/miconda