You should keep cc-ing mailing lists, so people coming after a while, with same issue, will be reading mail thread and see that the given solution was right.
Thanks, Daniel
On 03/20/07 21:42, Tim Madorma wrote:
Got it. thanks so much!
Tim
On 3/20/07, Daniel-Constantin Mierla daniel@voice-system.ro wrote:
Hello,
On 03/20/07 17:39, Tim Madorma wrote:
Hi,
I have put the OpenSER version 1.2 behind a BIG IP load balancer which provides a static private IP address (10.1.1.20) via NAT to the OpenSER. In our application, the clients will send to one of the three public addresses that are defined as aliases:
alias="65.185.232.62:5061" alias="65.185.232.62:5062" alias="65.185.232.62:5063"
you have to remove quotes around the value of alias parameters. As it is now, the value between quotes is considered to be hostname. alias=65.185.232.62:5061 alias=65.185.232.62:5062 alias=65.185.232.62:5063
Same case as it was reported by Juha, today with loose routing ...
Cheers, Daniel
An incoming OPTIONS message is received with the host in the REQ URI set to 65.185.232.62:5063 is received and when it hits this section of openser.cfg:
if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); };it executes within the if conditional and tries to route the OPTIONS message. I am wondering why uri does not match myself. The debug output from the log is as follows (it seems that the alias assignments are not working):
Mar 19 16:41:11 homer openser[2267]: [ID 487083 local0.debug] grep_sock_info - checking if host==us: 13==9 && [65.185.232.62] == [1 0.1.1.20] Mar 19 16:41:11 homer openser[2267]: [ID 375670 local0.debug] grep_sock_info - checking if port 5061 matches port 5063 Mar 19 16:41:11 homer openser[2267]: [ID 487083 local0.debug] grep_sock_info - checking if host==us: 13==9 && [65.185.232.62] == [1 0.1.1.20] Mar 19 16:41:11 homer openser[2267]: [ID 375670 local0.debug] grep_sock_info - checking if port 5062 matches port 5063 Mar 19 16:41:11 homer openser[2267]: [ID 487083 local0.debug] grep_sock_info - checking if host==us: 13==9 && [65.185.232.62] == [1 0.1.1.20] Mar 19 16:41:11 homer openser[2267]: [ID 375670 local0.debug] grep_sock_info - checking if port 5063 matches port 5063 Mar 19 16:41:11 homer openser[2267]: [ID 140248 local0.debug] DEBUG:check_self: host != me
Any suggestions? I have not tried this in any other version. Is this a possible bug in 1.2?
thanks, Tim
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Yup. This is how we can avoid having the same question posted over and over again ....
Regards, Ovidiu Sas
On 3/21/07, Daniel-Constantin Mierla daniel@voice-system.ro wrote:
You should keep cc-ing mailing lists, so people coming after a while, with same issue, will be reading mail thread and see that the given solution was right.
Thanks, Daniel
On 03/20/07 21:42, Tim Madorma wrote:
Got it. thanks so much!
Tim
On 3/20/07, Daniel-Constantin Mierla daniel@voice-system.ro wrote:
Hello,
On 03/20/07 17:39, Tim Madorma wrote:
Hi,
I have put the OpenSER version 1.2 behind a BIG IP load balancer which provides a static private IP address (10.1.1.20) via NAT to the OpenSER. In our application, the clients will send to one of the three public addresses that are defined as aliases:
alias="65.185.232.62:5061" alias="65.185.232.62:5062" alias="65.185.232.62:5063"
you have to remove quotes around the value of alias parameters. As it is now, the value between quotes is considered to be hostname. alias=65.185.232.62:5061 alias=65.185.232.62:5062 alias=65.185.232.62:5063
Same case as it was reported by Juha, today with loose routing ...
Cheers, Daniel
An incoming OPTIONS message is received with the host in the REQ URI set to 65.185.232.62:5063 is received and when it hits this section of openser.cfg:
if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); };it executes within the if conditional and tries to route the OPTIONS message. I am wondering why uri does not match myself. The debug output from the log is as follows (it seems that the alias assignments are not working):
Mar 19 16:41:11 homer openser[2267]: [ID 487083 local0.debug] grep_sock_info - checking if host==us: 13==9 && [65.185.232.62] == [1 0.1.1.20] Mar 19 16:41:11 homer openser[2267]: [ID 375670 local0.debug] grep_sock_info - checking if port 5061 matches port 5063 Mar 19 16:41:11 homer openser[2267]: [ID 487083 local0.debug] grep_sock_info - checking if host==us: 13==9 && [65.185.232.62] == [1 0.1.1.20] Mar 19 16:41:11 homer openser[2267]: [ID 375670 local0.debug] grep_sock_info - checking if port 5062 matches port 5063 Mar 19 16:41:11 homer openser[2267]: [ID 487083 local0.debug] grep_sock_info - checking if host==us: 13==9 && [65.185.232.62] == [1 0.1.1.20] Mar 19 16:41:11 homer openser[2267]: [ID 375670 local0.debug] grep_sock_info - checking if port 5063 matches port 5063 Mar 19 16:41:11 homer openser[2267]: [ID 140248 local0.debug] DEBUG:check_self: host != me
Any suggestions? I have not tried this in any other version. Is this a possible bug in 1.2?
thanks, Tim
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Is this something new to 1.2? If yes it should be on the migration wiki
regards klaus
Ovidiu Sas wrote:
Yup. This is how we can avoid having the same question posted over and over again ....
Regards, Ovidiu Sas
On 3/21/07, Daniel-Constantin Mierla daniel@voice-system.ro wrote:
You should keep cc-ing mailing lists, so people coming after a while, with same issue, will be reading mail thread and see that the given solution was right.
Thanks, Daniel
On 03/20/07 21:42, Tim Madorma wrote:
Got it. thanks so much!
Tim
On 3/20/07, Daniel-Constantin Mierla daniel@voice-system.ro wrote:
Hello,
On 03/20/07 17:39, Tim Madorma wrote:
Hi,
I have put the OpenSER version 1.2 behind a BIG IP load balancer
which
provides a static private IP address (10.1.1.20) via NAT to the OpenSER. In our application, the clients will send to one of the
three
public addresses that are defined as aliases:
alias="65.185.232.62:5061" alias="65.185.232.62:5062" alias="65.185.232.62:5063"
you have to remove quotes around the value of alias parameters. As
it is
now, the value between quotes is considered to be hostname. alias=65.185.232.62:5061 alias=65.185.232.62:5062 alias=65.185.232.62:5063
Same case as it was reported by Juha, today with loose routing ...
Cheers, Daniel
An incoming OPTIONS message is received with the host in the REQ URI set to 65.185.232.62:5063 is received and when it hits this
section of
openser.cfg:
if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); };it executes within the if conditional and tries to route the OPTIONS message. I am wondering why uri does not match myself. The debug output from the log is as follows (it seems that the alias
assignments
are not working):
Mar 19 16:41:11 homer openser[2267]: [ID 487083 local0.debug] grep_sock_info - checking if host==us: 13==9 && [65.185.232.62]
== [1
0.1.1.20] Mar 19 16:41:11 homer openser[2267]: [ID 375670 local0.debug] grep_sock_info - checking if port 5061 matches port 5063 Mar 19 16:41:11 homer openser[2267]: [ID 487083 local0.debug] grep_sock_info - checking if host==us: 13==9 && [65.185.232.62]
== [1
0.1.1.20] Mar 19 16:41:11 homer openser[2267]: [ID 375670 local0.debug] grep_sock_info - checking if port 5062 matches port 5063 Mar 19 16:41:11 homer openser[2267]: [ID 487083 local0.debug] grep_sock_info - checking if host==us: 13==9 && [65.185.232.62]
== [1
0.1.1.20] Mar 19 16:41:11 homer openser[2267]: [ID 375670 local0.debug] grep_sock_info - checking if port 5063 matches port 5063 Mar 19 16:41:11 homer openser[2267]: [ID 140248 local0.debug] DEBUG:check_self: host != me
Any suggestions? I have not tried this in any other version. Is
this a
possible bug in 1.2?
thanks, Tim
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
On 03/21/07 17:38, Klaus Darilion wrote:
Is this something new to 1.2? If yes it should be on the migration wiki
Don't recall to be new in 1.2. Should be there since first version of openser, strange enough nobody got stuck so far.
Cheers, Daniel
regards klaus
Ovidiu Sas wrote:
Yup. This is how we can avoid having the same question posted over and over again ....
Regards, Ovidiu Sas
On 3/21/07, Daniel-Constantin Mierla daniel@voice-system.ro wrote:
You should keep cc-ing mailing lists, so people coming after a while, with same issue, will be reading mail thread and see that the given solution was right.
Thanks, Daniel
On 03/20/07 21:42, Tim Madorma wrote:
Got it. thanks so much!
Tim
On 3/20/07, Daniel-Constantin Mierla daniel@voice-system.ro wrote:
Hello,
On 03/20/07 17:39, Tim Madorma wrote:
Hi,
I have put the OpenSER version 1.2 behind a BIG IP load
balancer which
provides a static private IP address (10.1.1.20) via NAT to the OpenSER. In our application, the clients will send to one of
the three
public addresses that are defined as aliases:
alias="65.185.232.62:5061" alias="65.185.232.62:5062" alias="65.185.232.62:5063"
you have to remove quotes around the value of alias parameters.
As it is
now, the value between quotes is considered to be hostname. alias=65.185.232.62:5061 alias=65.185.232.62:5062 alias=65.185.232.62:5063
Same case as it was reported by Juha, today with loose routing ...
Cheers, Daniel
An incoming OPTIONS message is received with the host in the
REQ URI
set to 65.185.232.62:5063 is received and when it hits this
section of
openser.cfg:
if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); };it executes within the if conditional and tries to route the
OPTIONS
message. I am wondering why uri does not match myself. The debug output from the log is as follows (it seems that the alias
assignments
are not working):
Mar 19 16:41:11 homer openser[2267]: [ID 487083 local0.debug] grep_sock_info - checking if host==us: 13==9 &&
[65.185.232.62] == [1
0.1.1.20] Mar 19 16:41:11 homer openser[2267]: [ID 375670 local0.debug] grep_sock_info - checking if port 5061 matches port 5063 Mar 19 16:41:11 homer openser[2267]: [ID 487083 local0.debug] grep_sock_info - checking if host==us: 13==9 &&
[65.185.232.62] == [1
0.1.1.20] Mar 19 16:41:11 homer openser[2267]: [ID 375670 local0.debug] grep_sock_info - checking if port 5062 matches port 5063 Mar 19 16:41:11 homer openser[2267]: [ID 487083 local0.debug] grep_sock_info - checking if host==us: 13==9 &&
[65.185.232.62] == [1
0.1.1.20] Mar 19 16:41:11 homer openser[2267]: [ID 375670 local0.debug] grep_sock_info - checking if port 5063 matches port 5063 Mar 19 16:41:11 homer openser[2267]: [ID 140248 local0.debug] DEBUG:check_self: host != me
Any suggestions? I have not tried this in any other version. Is
this a
possible bug in 1.2?
thanks, Tim
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-
Daniel-Constantin Mierla -
Klaus Darilion -
Ovidiu Sas