hi, I have two kamailio 3.3.4 servers sharing one database. usrloc module is loaded on both machines. The DNS name for the machines is shared (i.e siptest.testdomain.com with 2 public ip's - one for Server1 and one for Server2) and setup in round robin mode. The scenario is as follows:User 1 registers to Server1User 2 registers to Server2 User1 tries to call User2 but Server1 throws an error and the call doesn't ever connect to User2: WARNING: usrloc [udomain.c:321]: non-local socket udp:xxx.xxx.xxx.xxx:5060...ignoring.
Any ideas? ttyl,Dave
I dont think it works like that, obviously the server 1 does not have a connection if the user is registered on server 2.
On 3/19/13 11:05 PM, David Thomson wrote:
hi,
I have two kamailio 3.3.4 servers sharing one database. usrloc module is loaded on both machines. The DNS name for the machines is shared (i.e siptest.testdomain.com with 2 public ip's - one for Server1 and one for Server2) and setup in round robin mode.
The scenario is as follows: User 1 registers to Server1 User 2 registers to Server2
User1 tries to call User2 but Server1 throws an error and the call doesn't ever connect to User2:
WARNING: usrloc [udomain.c:321]: non-local socket udp:xxx.xxx.xxx.xxx:5060...ignoring.
Any ideas?
ttyl, Dave
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
On 20 March 2013 03:05, David Thomson jdavidthomson@hotmail.com wrote:
hi,
I have two kamailio 3.3.4 servers sharing one database. usrloc module is loaded on both machines. The DNS name for the machines is shared (i.e siptest.testdomain.com with 2 public ip's - one for Server1 and one for Server2) and setup in round robin mode.
The scenario is as follows: User 1 registers to Server1 User 2 registers to Server2
User1 tries to call User2 but Server1 throws an error and the call doesn't ever connect to User2:
WARNING: usrloc [udomain.c:321]: non-local socket udp:xxx.xxx.xxx.xxx:5060...ignoring.
Hi
I think you can use the t_replicate function within your register route so that each server will replicate the registration request to the other.
I did this many years ago on OpenSER using the following just before the consume_credentials() line.
On each of the servers you want to check that the src_ip is not that of the OTHER sever so they don't keep sending back and forth forever :-) So in the example below 10.0.1.1 is the IP of the other server.
--------8<----------------------------------------- if (!src_ip==10.0.1.1) { t_replicate("udp:10.0.1.1:5060"); xlog("L_INFO", "Replicating $ct, URI = $ru"); };
consume_credentials(); --------8<-----------------------------------------
Have a look at http://www.kamailio.org/docs/modules/3.3.x/modules/tm.html#t_replicate
Hope this helps.
-Barry
-
Barry Flanagan -
David Thomson -
David | StyleFlare