6 May
2016
6 May
'16
7:15 a.m.
Hi
I have it working but i have re-read documentation and do not see how to do
what i need.
I explain it :)
Now i have only one LCR provider and i need to add a backup one.
I do not know if its enough to add under same lcr_id or its better to add
with different one and add several lcr_rule and lcr_rule_target
Acordding to next_gw() function, what is better to be used? In my case. a
primary providers is used and only a backup one for the momment.
Thanks for your help
Alberto
6 May
6 May
7:31 a.m.
Have you considered either dispatcher or just using a failure route?
-- Fred
On May 6, 2016, at 7:15 AM, Alberto Sagredo
<alberto.sagredo(a)avanzada7.com> wrote:
Hi
I have it working but i have re-read documentation and do not see how to do what i need.
I explain it :)
Now i have only one LCR provider and i need to add a backup one.
I do not know if its enough to add under same lcr_id or its better to add with different
one and add several lcr_rule and lcr_rule_target
Acordding to next_gw() function, what is better to be used? In my case. a primary
providers is used and only a backup one for the momment.
Thanks for your help
Alberto
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
7:44 a.m.
Alberto Sagredo writes:
I do not know if its enough to add under same lcr_id or its better to add
with different one and add several lcr_rule and lcr_rule_target
Acordding to next_gw() function, what is better to be used? In my case. a
primary providers is used and only a backup one for the momment.
If your rules would be the same for both, then you can add a backup gw
to each rule with lower priority. You can also use defunct_gw()
function to make failing gws inactive for a period.
If the rules are not the same, then in failure route you would need to
call load_gws() with another lcr id.
-- Juha
9 May
9 May
2:12 a.m.
Thanks Both Fred/Juha
System is in production when i have a "free slot" i will check repeating
each rule with lower priority. I think that would work as i expect
Thanks for your tips guys!
Have a nice week
Alberto
2016-05-06 13:44 GMT+02:00 Juha Heinanen <jh(a)tutpro.com>om>:
Alberto Sagredo writes:
I do not know if its enough to add under same lcr_id or its better to add
with different one and add several lcr_rule and lcr_rule_target
Acordding to next_gw() function, what is better to be used? In my case. a
primary providers is used and only a backup one for the momment.
If your rules would be the same for both, then you can add a backup gw
to each rule with lower priority. You can also use defunct_gw()
function to make failing gws inactive for a period.
If the rules are not the same, then in failure route you would need to
call load_gws() with another lcr id.
-- Juha
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
2961
days inactive
2964
days old
3 comments
3 participants
participants (3)
-
Alberto Sagredo -
Fred Posner -
Juha Heinanen