Hi Davor!
Not sure what your scenario is. Usually, the voicemail id will be the "canonical" SIP URI, in my case sip:klaus.darilion@mydomain
I have also aliases like sip:klaus@mydomain which maps to sip:klaus.darilion@mydomain.
If you do it the same way, then the config is fine.
In your case the lookup("aliases") does not hit.
Usually I: - write the canonical SIP URI (after lookup("aliases") but before lookup("location") ) into an AVP - use this AVP in failure route. e.g. set the RURI to this AVP - to avoid rewriting the domain part (you will loose the domain info, bad in multi domain setups) push the URI of the voicemail server in the destination URI (avp_pushto, send to voicemal but do net rewrite the request URI)
regards klaus
PS: CC to the list
davor jovanovic wrote:
Hi Klaus,
first of all I want to thank you for your reply. I was on some business trip last two weeks so I wasn't able to thank you for reply and try "revert_uri" function. I try it today but still is the same, I keep getting "not found in usrloc" for user that is in "location" table and for his alias. I can call user by his username and alias so I believe that alias is correctly added to MySQL, but can not rewrite username with alias and forward it to PBX.
I have put ser.cfg and debug log in attachment, and if you be so kind when you find time to make a quick look I would be very grateful. This ser.cfg is my testing configuration and is basic. If I need to provide some more outputs please let me know.
Thank you very much !!!
davor
Klaus Darilion wrote:
The second lookup does not work, as the first lookup changes the request URI. Try revert_uri(); in failure route, just before the lookup().
klaus
On Fri, April 14, 2006 11:29, davor jovanovic said:
Hi all,
I have a problem with using aliases when user doesn't answer the call (408, request timeout). for this I'm using failure_route[1]. After 20sec when user doesn't answer the call, call comes in failure_route and it is recognizes as 408, but when I want to rewrite URI with alias "884" I get "Not found in usrloc", but as you can see from the output of "serctl ul show" user is in both tables (location and aliases). Can somebody help because I don't know what I'm doing wrong.
Thanks a lot
davor
failure_route[1]{ if(t_check_status("408")){ log("LOG:entered failure route 1 on code 408\n"); lookup("aliases"); rewritehostport("161.53.2.235:5060"); t_relay(); } }
1(22439) ->>>>>>>>> T_code=180, new_code=408 1(22439) DEBUG: t_check: msg id=2 global id=2 T start=0x40460708 1(22439) DEBUG: t_check: T already found! 1(22439) DEBUG:t_check_status: checked status is <408> 1(22439) LOG:entered failure route 1 on code 408 1(22439) lookup(): 'djovanovic' Not found in usrloc 1(22439) ERROR: t_forward_nonack: no branched for forwarding 1(22439) ERROR: w_t_relay (failure mode): forwarding failed
serctl ul show
domain: 'location' aor : 'djovanovic'
domain : 'location' aor : 'djovanovic' Contact : 'sip:djovanovic@161.53.0.77:5060' Expires : 429 q : Call-ID : '40C79AFEA5C644ADB6FEA320F247C793@sipgw.srce.hr' CSeq : 52664 ...Record(0x4045e238)... domain: 'aliases' aor : '884' ~~~Contact(0x4045e298)~~~ domain : 'aliases' aor : '884' Contact : 'sip:djovanovic@sipgw.srce.hr' Expires : Permanent q : 1 Call-ID : 'The-Answer-To-The-Ultimate-Question-Of-Life-Universe-And-Everything' _______________________________________________ Serusers mailing list Serusers@iptel.org http://mail.iptel.org/mailman/listinfo/serusersHi Klaus,
first of all I want to thank you for your reply. I was on some business trip last two weeks so I wasn't able to thank you for reply and try "revert_uri" function. I try it today but still is the same, I keep getting "not found in usrloc" for user that is in "location" table and for his alias. I can call user by his username and alias so I believe that alias is correctly added to MySQL, but can not rewrite username with alias and forward it to PBX.
I have put ser.cfg and debug log in attachment, and if you be so kind when you find time to make a quick look I would be very grateful. This ser.cfg is my testing configuration and is basic. If I need provide some outputs please let me know.
Thank you very much !!!
davor
Hi Klaus,
i'll try with AVP.
About my scenario: what I want to do is, when user "sip:djovanovic@srce.hr" is looged in but doesn't answer the call, I want to use his alias "884" which I rewrite with IP address (xxx.xxx.xxx.xxx) of Cisco GW ("sip:884@xxx.xxx.xxx.xxx" ) and GW forward this call to PBX (local number 884).
Thank you for your reply.
davor
Klaus Darilion wrote:
Hi Davor!
Not sure what your scenario is. Usually, the voicemail id will be the "canonical" SIP URI, in my case sip:klaus.darilion@mydomain
I have also aliases like sip:klaus@mydomain which maps to sip:klaus.darilion@mydomain.
If you do it the same way, then the config is fine.
In your case the lookup("aliases") does not hit.
Usually I:
- write the canonical SIP URI (after lookup("aliases") but before
lookup("location") ) into an AVP
- use this AVP in failure route. e.g. set the RURI to this AVP
- to avoid rewriting the domain part (you will loose the domain info,
bad in multi domain setups) push the URI of the voicemail server in the destination URI (avp_pushto, send to voicemal but do net rewrite the request URI)
regards klaus
PS: CC to the list
davor jovanovic wrote:
Hi Klaus,
first of all I want to thank you for your reply. I was on some business trip last two weeks so I wasn't able to thank you for reply and try "revert_uri" function. I try it today but still is the same, I keep getting "not found in usrloc" for user that is in "location" table and for his alias. I can call user by his username and alias so I believe that alias is correctly added to MySQL, but can not rewrite username with alias and forward it to PBX.
I have put ser.cfg and debug log in attachment, and if you be so kind when you find time to make a quick look I would be very grateful. This ser.cfg is my testing configuration and is basic. If I need to provide some more outputs please let me know.
Thank you very much !!!
davor
Klaus Darilion wrote:
The second lookup does not work, as the first lookup changes the request URI. Try revert_uri(); in failure route, just before the lookup().
klaus
On Fri, April 14, 2006 11:29, davor jovanovic said:
Hi all,
I have a problem with using aliases when user doesn't answer the call (408, request timeout). for this I'm using failure_route[1]. After 20sec when user doesn't answer the call, call comes in failure_route and it is recognizes as 408, but when I want to rewrite URI with alias "884" I get "Not found in usrloc", but as you can see from the output of "serctl ul show" user is in both tables (location and aliases). Can somebody help because I don't know what I'm doing wrong.
Thanks a lot
davor
failure_route[1]{ if(t_check_status("408")){ log("LOG:entered failure route 1 on code 408\n"); lookup("aliases"); rewritehostport("161.53.2.235:5060"); t_relay(); } }
1(22439) ->>>>>>>>> T_code=180, new_code=408 1(22439) DEBUG: t_check: msg id=2 global id=2 T start=0x40460708 1(22439) DEBUG: t_check: T already found! 1(22439) DEBUG:t_check_status: checked status is <408> 1(22439) LOG:entered failure route 1 on code 408 1(22439) lookup(): 'djovanovic' Not found in usrloc 1(22439) ERROR: t_forward_nonack: no branched for forwarding 1(22439) ERROR: w_t_relay (failure mode): forwarding failed
serctl ul show
domain: 'location' aor : 'djovanovic'
domain : 'location' aor : 'djovanovic' Contact : 'sip:djovanovic@161.53.0.77:5060' Expires : 429 q : Call-ID : '40C79AFEA5C644ADB6FEA320F247C793@sipgw.srce.hr' CSeq : 52664 ...Record(0x4045e238)... domain: 'aliases' aor : '884' ~~~Contact(0x4045e298)~~~ domain : 'aliases' aor : '884' Contact : 'sip:djovanovic@sipgw.srce.hr' Expires : Permanent q : 1 Call-ID : 'The-Answer-To-The-Ultimate-Question-Of-Life-Universe-And-Everything' _______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusersHi Klaus,
first of all I want to thank you for your reply. I was on some business trip last two weeks so I wasn't able to thank you for reply and try "revert_uri" function. I try it today but still is the same, I keep getting "not found in usrloc" for user that is in "location" table and for his alias. I can call user by his username and alias so I believe that alias is correctly added to MySQL, but can not rewrite username with alias and forward it to PBX.
I have put ser.cfg and debug log in attachment, and if you be so kind when you find time to make a quick look I would be very grateful. This ser.cfg is my testing configuration and is basic. If I need provide some outputs please let me know.
Thank you very much !!!
davor
Hi!
Do you want to map from the canoncial username to the alias? Then lookup("aliases") is the wrong way, as it maps from alias to the canoncial username.
For this there are at least 2 fixes: A) create another table aliases_reverse, which maps in the other direction. then use lookup("aliases_reverse") in failure route. or
B) make 884 the canonical username and davor@... the alias.
You can also make other solutions with AVPs which are loaded from the preferences table of the called user, ....
regards klaus
davor jovanovic wrote:
Hi Klaus,
i'll try with AVP.
About my scenario: what I want to do is, when user "sip:djovanovic@srce.hr" is looged in but doesn't answer the call, I want to use his alias "884" which I rewrite with IP address (xxx.xxx.xxx.xxx) of Cisco GW ("sip:884@xxx.xxx.xxx.xxx" ) and GW forward this call to PBX (local number 884).
Thank you for your reply.
davor
Klaus Darilion wrote:
Hi Davor!
Not sure what your scenario is. Usually, the voicemail id will be the "canonical" SIP URI, in my case sip:klaus.darilion@mydomain
I have also aliases like sip:klaus@mydomain which maps to sip:klaus.darilion@mydomain.
If you do it the same way, then the config is fine.
In your case the lookup("aliases") does not hit.
Usually I:
- write the canonical SIP URI (after lookup("aliases") but before
lookup("location") ) into an AVP
- use this AVP in failure route. e.g. set the RURI to this AVP
- to avoid rewriting the domain part (you will loose the domain info,
bad in multi domain setups) push the URI of the voicemail server in the destination URI (avp_pushto, send to voicemal but do net rewrite the request URI)
regards klaus
PS: CC to the list
davor jovanovic wrote:
Hi Klaus,
first of all I want to thank you for your reply. I was on some business trip last two weeks so I wasn't able to thank you for reply and try "revert_uri" function. I try it today but still is the same, I keep getting "not found in usrloc" for user that is in "location" table and for his alias. I can call user by his username and alias so I believe that alias is correctly added to MySQL, but can not rewrite username with alias and forward it to PBX.
I have put ser.cfg and debug log in attachment, and if you be so kind when you find time to make a quick look I would be very grateful. This ser.cfg is my testing configuration and is basic. If I need to provide some more outputs please let me know.
Thank you very much !!!
davor
Klaus Darilion wrote:
The second lookup does not work, as the first lookup changes the request URI. Try revert_uri(); in failure route, just before the lookup().
klaus
On Fri, April 14, 2006 11:29, davor jovanovic said:
Hi all,
I have a problem with using aliases when user doesn't answer the call (408, request timeout). for this I'm using failure_route[1]. After 20sec when user doesn't answer the call, call comes in failure_route and it is recognizes as 408, but when I want to rewrite URI with alias "884" I get "Not found in usrloc", but as you can see from the output of "serctl ul show" user is in both tables (location and aliases). Can somebody help because I don't know what I'm doing wrong.
Thanks a lot
davor
failure_route[1]{ if(t_check_status("408")){ log("LOG:entered failure route 1 on code 408\n"); lookup("aliases"); rewritehostport("161.53.2.235:5060"); t_relay(); } }
1(22439) ->>>>>>>>> T_code=180, new_code=408 1(22439) DEBUG: t_check: msg id=2 global id=2 T start=0x40460708 1(22439) DEBUG: t_check: T already found! 1(22439) DEBUG:t_check_status: checked status is <408> 1(22439) LOG:entered failure route 1 on code 408 1(22439) lookup(): 'djovanovic' Not found in usrloc 1(22439) ERROR: t_forward_nonack: no branched for forwarding 1(22439) ERROR: w_t_relay (failure mode): forwarding failed
serctl ul show
domain: 'location' aor : 'djovanovic'
domain : 'location' aor : 'djovanovic' Contact : 'sip:djovanovic@161.53.0.77:5060' Expires : 429 q : Call-ID : '40C79AFEA5C644ADB6FEA320F247C793@sipgw.srce.hr' CSeq : 52664 ...Record(0x4045e238)... domain: 'aliases' aor : '884' ~~~Contact(0x4045e298)~~~ domain : 'aliases' aor : '884' Contact : 'sip:djovanovic@sipgw.srce.hr' Expires : Permanent q : 1 Call-ID : 'The-Answer-To-The-Ultimate-Question-Of-Life-Universe-And-Everything' _______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusersHi Klaus,
first of all I want to thank you for your reply. I was on some business trip last two weeks so I wasn't able to thank you for reply and try "revert_uri" function. I try it today but still is the same, I keep getting "not found in usrloc" for user that is in "location" table and for his alias. I can call user by his username and alias so I believe that alias is correctly added to MySQL, but can not rewrite username with alias and forward it to PBX.
I have put ser.cfg and debug log in attachment, and if you be so kind when you find time to make a quick look I would be very grateful. This ser.cfg is my testing configuration and is basic. If I need provide some outputs please let me know.
Thank you very much !!!
davor
-
davor jovanovic -
Klaus Darilion