Hi,
*I recently installed kamailio 4.1 on debian wheezy (i386)*
Below are the list of modules in debian wheezy.
root@debian:/etc/kamailio# find / -name modules
/etc/modules
/etc/initramfs-tools/modules
/etc/gnome-vfs-2.0/modules
/lib/modules
/usr/share/initramfs-tools/modules
/usr/share/doc/initramfs-tools/examples/modules
/usr/share/doc/kamailio/modules
/usr/lib/vmware-tools/lib64/libconf/pango/1.6.0/modules
/usr/lib/vmware-tools/lib64/libconf/gtk-2.0/modules
/usr/lib/vmware-tools/lib32/libconf/pango/1.6.0/modules
/usr/lib/vmware-tools/lib32/libconf/gtk-2.0/modules
/usr/lib/i386-linux-gnu/libproxy/0.3.1/modules
/usr/lib/i386-linux-gnu/pango/1.6.0/modules
/usr/lib/i386-linux-gnu/kamailio/modules
/usr/lib/i386-linux-gnu/gio/modules
/usr/lib/xorg/modules
/usr/lib/gnome-vfs-2.0/modules
/proc/asound/modules
/proc/modules
so i have added below mpath in kamaiio.cfg ,still i am facing errors .could you please help on it .
*Added mpath in kamialio.cfg :*
mpath="/.... .../:/usr/lib/i386-linux-gnu/kamailio/modules/"
mpath="/usr/lib/i386-linux-gnu/kamailio/modules/"
*facing error:*
root@debian:/etc/kamailio# kamailio start
loading modules under config path: /.... .../:/usr/lib/i386-linux-gnu/kamailio/modules/
loading modules under config path: /usr/lib/i386-linux-gnu/kamailio/modules/
ERROR: bad config file (1 errors)
Segmentation fault
note:
For same debain wheezy used for PCSCF ,it is working fine .
For ICSCF and SCSCF iam facing errors. only observed one is, for these i have installed mysql where for pcscf mysql is not installed. Is this any problem for modules.
could you please assist me further.
Thanks in Advance!
Regards,
Ramyasri.
On 29/12/15 12:20, Ramya Y wrote:
Hi,
*I recently installed kamailio 4.1 on debian wheezy (i386)*
Below are the list of modules in debian wheezy.
root@debian:/etc/kamailio# find / -name modules
/etc/modules
/etc/initramfs-tools/modules
/etc/gnome-vfs-2.0/modules
/lib/modules
/usr/share/initramfs-tools/modules
/usr/share/doc/initramfs-tools/examples/modules
/usr/share/doc/kamailio/modules
/usr/lib/vmware-tools/lib64/libconf/pango/1.6.0/modules
/usr/lib/vmware-tools/lib64/libconf/gtk-2.0/modules
/usr/lib/vmware-tools/lib32/libconf/pango/1.6.0/modules
/usr/lib/vmware-tools/lib32/libconf/gtk-2.0/modules
/usr/lib/i386-linux-gnu/libproxy/0.3.1/modules
/usr/lib/i386-linux-gnu/pango/1.6.0/modules
/usr/lib/i386-linux-gnu/kamailio/modules
/usr/lib/i386-linux-gnu/gio/modules
/usr/lib/xorg/modules
/usr/lib/gnome-vfs-2.0/modules
/proc/asound/modules
/proc/modules
so i have added below mpath in kamaiio.cfg ,still i am facing errors .could you please help on it .
*Added mpath in kamialio.cfg :*
mpath="/.... .../:/usr/lib/i386-linux-gnu/kamailio/modules/"
mpath="/usr/lib/i386-linux-gnu/kamailio/modules/"
Why do you have two mpath added to your config?
Cheers, Daniel
Hi Daniel,
Now i used single mpath: /usr/lib/i386-linux-gnu/kamailio/modules/
Still i am facing the same error.
root@debian:/etc/kamailio# kamailio start
loading modules under config path: /usr/lib/i386-linux-gnu/kamailio/modules/
ERROR: bad config file (1 errors)
Segmentation fault
2) mysql modules in my kamailio
root@debian:~# find / -name mysql /etc/init.d/mysql /etc/mysql /var/lib/mysql /var/lib/mysql/mysql /var/log/mysql /usr/share/bash-completion/completions/mysql /usr/share/mysql /usr/lib/mysql /usr/bin/mysql /home/user/Desktop/sql/mysql-5.5.46/include/mysql
3) module files in kamailio
root@debian:/etc/kamailio# find / -name modules /etc/modules /etc/initramfs-tools/modules /etc/gnome-vfs-2.0/modules /lib/modules /usr/share/initramfs-tools/modules /usr/share/doc/initramfs-tools/examples/modules /usr/share/doc/kamailio/modules /usr/lib/vmware-tools/lib64/libconf/pango/1.6.0/modules /usr/lib/vmware-tools/lib64/libconf/gtk-2.0/modules /usr/lib/vmware-tools/lib32/libconf/pango/1.6.0/modules /usr/lib/vmware-tools/lib32/libconf/gtk-2.0/modules /usr/lib/i386-linux-gnu/libproxy/0.3.1/modules /usr/lib/i386-linux-gnu/pango/1.6.0/modules /usr/lib/i386-linux-gnu/kamailio/modules /usr/lib/i386-linux-gnu/gio/modules /usr/lib/xorg/modules /usr/lib/gnome-vfs-2.0/modules /proc/asound/modules /proc/modules
please find the attached log file and kamailio.cfg file. Could you please assist further.
Regards, Ramya
On Tue, Jan 5, 2016 at 5:08 PM, Daniel-Constantin Mierla miconda@gmail.com wrote:
On 29/12/15 12:20, Ramya Y wrote:
Hi,
*I recently installed kamailio 4.1 on debian wheezy (i386)*
Below are the list of modules in debian wheezy.
root@debian:/etc/kamailio# find / -name modules
/etc/modules
/etc/initramfs-tools/modules
/etc/gnome-vfs-2.0/modules
/lib/modules
/usr/share/initramfs-tools/modules
/usr/share/doc/initramfs-tools/examples/modules
/usr/share/doc/kamailio/modules
/usr/lib/vmware-tools/lib64/libconf/pango/1.6.0/modules
/usr/lib/vmware-tools/lib64/libconf/gtk-2.0/modules
/usr/lib/vmware-tools/lib32/libconf/pango/1.6.0/modules
/usr/lib/vmware-tools/lib32/libconf/gtk-2.0/modules
/usr/lib/i386-linux-gnu/libproxy/0.3.1/modules
/usr/lib/i386-linux-gnu/pango/1.6.0/modules
/usr/lib/i386-linux-gnu/kamailio/modules
/usr/lib/i386-linux-gnu/gio/modules
/usr/lib/xorg/modules
/usr/lib/gnome-vfs-2.0/modules
/proc/asound/modules
/proc/modules
so i have added below mpath in kamaiio.cfg ,still i am facing errors .could you please help on it .
*Added mpath in kamialio.cfg :*
mpath="/.... .../:/usr/lib/i386-linux-gnu/kamailio/modules/"
mpath="/usr/lib/i386-linux-gnu/kamailio/modules/"
Why do you have two mpath added to your config?
Cheers, Daniel
-- Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Book: SIP Routing With Kamailio - http://www.asipto.comhttp://miconda.eu
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
could any one help me with this.
On Wed, Jan 6, 2016 at 11:15 PM, Ramya Y y.ramya146@gmail.com wrote:
Hi Daniel,
Now i used single mpath: /usr/lib/i386-linux-gnu/kamailio/modules/
Still i am facing the same error.
root@debian:/etc/kamailio# kamailio start
loading modules under config path: /usr/lib/i386-linux-gnu/kamailio/modules/
ERROR: bad config file (1 errors)
Segmentation fault
- mysql modules in my kamailio
root@debian:~# find / -name mysql /etc/init.d/mysql /etc/mysql /var/lib/mysql /var/lib/mysql/mysql /var/log/mysql /usr/share/bash-completion/completions/mysql /usr/share/mysql /usr/lib/mysql /usr/bin/mysql /home/user/Desktop/sql/mysql-5.5.46/include/mysql
- module files in kamailio
root@debian:/etc/kamailio# find / -name modules /etc/modules /etc/initramfs-tools/modules /etc/gnome-vfs-2.0/modules /lib/modules /usr/share/initramfs-tools/modules /usr/share/doc/initramfs-tools/examples/modules /usr/share/doc/kamailio/modules /usr/lib/vmware-tools/lib64/libconf/pango/1.6.0/modules /usr/lib/vmware-tools/lib64/libconf/gtk-2.0/modules /usr/lib/vmware-tools/lib32/libconf/pango/1.6.0/modules /usr/lib/vmware-tools/lib32/libconf/gtk-2.0/modules /usr/lib/i386-linux-gnu/libproxy/0.3.1/modules /usr/lib/i386-linux-gnu/pango/1.6.0/modules /usr/lib/i386-linux-gnu/kamailio/modules /usr/lib/i386-linux-gnu/gio/modules /usr/lib/xorg/modules /usr/lib/gnome-vfs-2.0/modules /proc/asound/modules /proc/modules
please find the attached log file and kamailio.cfg file. Could you please assist further.
Regards, Ramya
On Tue, Jan 5, 2016 at 5:08 PM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:
On 29/12/15 12:20, Ramya Y wrote:
Hi,
*I recently installed kamailio 4.1 on debian wheezy (i386)*
Below are the list of modules in debian wheezy.
root@debian:/etc/kamailio# find / -name modules
/etc/modules
/etc/initramfs-tools/modules
/etc/gnome-vfs-2.0/modules
/lib/modules
/usr/share/initramfs-tools/modules
/usr/share/doc/initramfs-tools/examples/modules
/usr/share/doc/kamailio/modules
/usr/lib/vmware-tools/lib64/libconf/pango/1.6.0/modules
/usr/lib/vmware-tools/lib64/libconf/gtk-2.0/modules
/usr/lib/vmware-tools/lib32/libconf/pango/1.6.0/modules
/usr/lib/vmware-tools/lib32/libconf/gtk-2.0/modules
/usr/lib/i386-linux-gnu/libproxy/0.3.1/modules
/usr/lib/i386-linux-gnu/pango/1.6.0/modules
/usr/lib/i386-linux-gnu/kamailio/modules
/usr/lib/i386-linux-gnu/gio/modules
/usr/lib/xorg/modules
/usr/lib/gnome-vfs-2.0/modules
/proc/asound/modules
/proc/modules
so i have added below mpath in kamaiio.cfg ,still i am facing errors .could you please help on it .
*Added mpath in kamialio.cfg :*
mpath="/.... .../:/usr/lib/i386-linux-gnu/kamailio/modules/"
mpath="/usr/lib/i386-linux-gnu/kamailio/modules/"
Why do you have two mpath added to your config?
Cheers, Daniel
-- Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Book: SIP Routing With Kamailio - http://www.asipto.comhttp://miconda.eu
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
hello
your log file says:
0(4133) ERROR: <core> [sr_module.c:565]: load_module(): could not find module <db_mysql> in </usr/lib/i386-linux-gnu/kamailio/modules/> 0(4133) : <core> [cfg.y:3432]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 114, column 12-21: failed to load module
your config file is wrong. it should be "db_mysql.so" not "db_mysql"
regards
huseyin
On Thu, Jan 7, 2016 at 7:48 PM, Ramya Y y.ramya146@gmail.com wrote:
could any one help me with this.
On Wed, Jan 6, 2016 at 11:15 PM, Ramya Y y.ramya146@gmail.com wrote:
Hi Daniel,
Now i used single mpath: /usr/lib/i386-linux-gnu/kamailio/modules/
Still i am facing the same error.
root@debian:/etc/kamailio# kamailio start
loading modules under config path: /usr/lib/i386-linux-gnu/kamailio/modules/
ERROR: bad config file (1 errors)
Segmentation fault
- mysql modules in my kamailio
root@debian:~# find / -name mysql /etc/init.d/mysql /etc/mysql /var/lib/mysql /var/lib/mysql/mysql /var/log/mysql /usr/share/bash-completion/completions/mysql /usr/share/mysql /usr/lib/mysql /usr/bin/mysql /home/user/Desktop/sql/mysql-5.5.46/include/mysql
- module files in kamailio
root@debian:/etc/kamailio# find / -name modules /etc/modules /etc/initramfs-tools/modules /etc/gnome-vfs-2.0/modules /lib/modules /usr/share/initramfs-tools/modules /usr/share/doc/initramfs-tools/examples/modules /usr/share/doc/kamailio/modules /usr/lib/vmware-tools/lib64/libconf/pango/1.6.0/modules /usr/lib/vmware-tools/lib64/libconf/gtk-2.0/modules /usr/lib/vmware-tools/lib32/libconf/pango/1.6.0/modules /usr/lib/vmware-tools/lib32/libconf/gtk-2.0/modules /usr/lib/i386-linux-gnu/libproxy/0.3.1/modules /usr/lib/i386-linux-gnu/pango/1.6.0/modules /usr/lib/i386-linux-gnu/kamailio/modules /usr/lib/i386-linux-gnu/gio/modules /usr/lib/xorg/modules /usr/lib/gnome-vfs-2.0/modules /proc/asound/modules /proc/modules
please find the attached log file and kamailio.cfg file. Could you please assist further.
Regards, Ramya
On Tue, Jan 5, 2016 at 5:08 PM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:
On 29/12/15 12:20, Ramya Y wrote:
Hi,
*I recently installed kamailio 4.1 on debian wheezy (i386)*
Below are the list of modules in debian wheezy.
root@debian:/etc/kamailio# find / -name modules
/etc/modules
/etc/initramfs-tools/modules
/etc/gnome-vfs-2.0/modules
/lib/modules
/usr/share/initramfs-tools/modules
/usr/share/doc/initramfs-tools/examples/modules
/usr/share/doc/kamailio/modules
/usr/lib/vmware-tools/lib64/libconf/pango/1.6.0/modules
/usr/lib/vmware-tools/lib64/libconf/gtk-2.0/modules
/usr/lib/vmware-tools/lib32/libconf/pango/1.6.0/modules
/usr/lib/vmware-tools/lib32/libconf/gtk-2.0/modules
/usr/lib/i386-linux-gnu/libproxy/0.3.1/modules
/usr/lib/i386-linux-gnu/pango/1.6.0/modules
/usr/lib/i386-linux-gnu/kamailio/modules
/usr/lib/i386-linux-gnu/gio/modules
/usr/lib/xorg/modules
/usr/lib/gnome-vfs-2.0/modules
/proc/asound/modules
/proc/modules
so i have added below mpath in kamaiio.cfg ,still i am facing errors .could you please help on it .
*Added mpath in kamialio.cfg :*
mpath="/.... .../:/usr/lib/i386-linux-gnu/kamailio/modules/"
mpath="/usr/lib/i386-linux-gnu/kamailio/modules/"
Why do you have two mpath added to your config?
Cheers, Daniel
-- Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Book: SIP Routing With Kamailio - http://www.asipto.comhttp://miconda.eu
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
btw
there should be a db_mysql.so file in your module directory. if there isnt any than you should compile it in the src dir and place it under that directory.
On Thu, Jan 7, 2016 at 7:58 PM, huseyin kalyoncu hkalyoncu@gmail.com wrote:
hello
your log file says:
0(4133) ERROR: <core> [sr_module.c:565]: load_module(): could not find module <db_mysql> in </usr/lib/i386-linux-gnu/kamailio/modules/> 0(4133) : <core> [cfg.y:3432]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 114, column 12-21: failed to load module
your config file is wrong. it should be "db_mysql.so" not "db_mysql"
regards
huseyin
On Thu, Jan 7, 2016 at 7:48 PM, Ramya Y y.ramya146@gmail.com wrote:
could any one help me with this.
On Wed, Jan 6, 2016 at 11:15 PM, Ramya Y y.ramya146@gmail.com wrote:
Hi Daniel,
Now i used single mpath: /usr/lib/i386-linux-gnu/kamailio/modules/
Still i am facing the same error.
root@debian:/etc/kamailio# kamailio start
loading modules under config path: /usr/lib/i386-linux-gnu/kamailio/modules/
ERROR: bad config file (1 errors)
Segmentation fault
- mysql modules in my kamailio
root@debian:~# find / -name mysql /etc/init.d/mysql /etc/mysql /var/lib/mysql /var/lib/mysql/mysql /var/log/mysql /usr/share/bash-completion/completions/mysql /usr/share/mysql /usr/lib/mysql /usr/bin/mysql /home/user/Desktop/sql/mysql-5.5.46/include/mysql
- module files in kamailio
root@debian:/etc/kamailio# find / -name modules /etc/modules /etc/initramfs-tools/modules /etc/gnome-vfs-2.0/modules /lib/modules /usr/share/initramfs-tools/modules /usr/share/doc/initramfs-tools/examples/modules /usr/share/doc/kamailio/modules /usr/lib/vmware-tools/lib64/libconf/pango/1.6.0/modules /usr/lib/vmware-tools/lib64/libconf/gtk-2.0/modules /usr/lib/vmware-tools/lib32/libconf/pango/1.6.0/modules /usr/lib/vmware-tools/lib32/libconf/gtk-2.0/modules /usr/lib/i386-linux-gnu/libproxy/0.3.1/modules /usr/lib/i386-linux-gnu/pango/1.6.0/modules /usr/lib/i386-linux-gnu/kamailio/modules /usr/lib/i386-linux-gnu/gio/modules /usr/lib/xorg/modules /usr/lib/gnome-vfs-2.0/modules /proc/asound/modules /proc/modules
please find the attached log file and kamailio.cfg file. Could you please assist further.
Regards, Ramya
On Tue, Jan 5, 2016 at 5:08 PM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:
On 29/12/15 12:20, Ramya Y wrote:
Hi,
*I recently installed kamailio 4.1 on debian wheezy (i386)*
Below are the list of modules in debian wheezy.
root@debian:/etc/kamailio# find / -name modules
/etc/modules
/etc/initramfs-tools/modules
/etc/gnome-vfs-2.0/modules
/lib/modules
/usr/share/initramfs-tools/modules
/usr/share/doc/initramfs-tools/examples/modules
/usr/share/doc/kamailio/modules
/usr/lib/vmware-tools/lib64/libconf/pango/1.6.0/modules
/usr/lib/vmware-tools/lib64/libconf/gtk-2.0/modules
/usr/lib/vmware-tools/lib32/libconf/pango/1.6.0/modules
/usr/lib/vmware-tools/lib32/libconf/gtk-2.0/modules
/usr/lib/i386-linux-gnu/libproxy/0.3.1/modules
/usr/lib/i386-linux-gnu/pango/1.6.0/modules
/usr/lib/i386-linux-gnu/kamailio/modules
/usr/lib/i386-linux-gnu/gio/modules
/usr/lib/xorg/modules
/usr/lib/gnome-vfs-2.0/modules
/proc/asound/modules
/proc/modules
so i have added below mpath in kamaiio.cfg ,still i am facing errors .could you please help on it .
*Added mpath in kamialio.cfg :*
mpath="/.... .../:/usr/lib/i386-linux-gnu/kamailio/modules/"
mpath="/usr/lib/i386-linux-gnu/kamailio/modules/"
Why do you have two mpath added to your config?
Cheers, Daniel
-- Daniel-Constantin Mierlahttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Book: SIP Routing With Kamailio - http://www.asipto.comhttp://miconda.eu
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-
Daniel-Constantin Mierla -
huseyin kalyoncu -
Ramya Y