Hi, I'm in need of making/tweak an existing Kamailio Presence setup which is giving some tough time.
*Whats already working:* BLF dialog states changes are already sent across the users. SCA is working as well.
*What isn't working:* When a User comes online then it sends SUBSCRIBE with *Event: dialog* and don't get notified of its subscribers state right then unless the monitored extensions make a call (BLF works)
*Why is it not working:* As evident from wireshark traces, the user IP phones (Test sets: Polycoms, Yealink, CISCO, Grandstream) don't send our *Event: presence* rather only *Event:dialog* and Kamailio do not send NOTIFY out to everyone. Though yes there is an internally generated PUBLISH seen and handled properly upon registration state changes.
Jitsi has been tested and Kamailio send out these registration state change info to jitsi, somce jitsi sends *Event:presence *in SUBSCRIBE.
I need dialog based NOTIFY to be sent out on registration state-change.
Need pointers and help on the topic, looking forward to some feedback.
Regards, Sammy
Hello,
from your description, I don't see a problem from the specs point of view, but more like something that you would like to have.
If UA subscribers only for dialog event, then it gets NOTIFY requests only for dialog states (new call, ..., termintated call). When it subscribers for presence, then it gets UA availability states.
And I think this is what you also get based on description. Am I wright?
Mixing the states of presence for dialog notifications is not possible, not in the specs, but eventually you can write a module yourself and map as you want/need presence states over dialog states.
Cheers, Daniel
On 03/03/2017 19:13, SamyGo wrote:
Hi, I'm in need of making/tweak an existing Kamailio Presence setup which is giving some tough time.
_Whats already working:_ BLF dialog states changes are already sent across the users. SCA is working as well.
_What isn't working:_ When a User comes online then it sends SUBSCRIBE with *Event: dialog* and don't get notified of its subscribers state right then unless the monitored extensions make a call (BLF works)
_Why is it not working:
_ As evident from wireshark traces, the user IP phones (Test sets: Polycoms, Yealink, CISCO, Grandstream) don't send our *Event: presence* rather only *Event:dialog* and Kamailio do not send NOTIFY out to everyone. Though yes there is an internally generated PUBLISH seen and handled properly upon registration state changes.
Jitsi has been tested and Kamailio send out these registration state change info to jitsi, somce jitsi sends *Event:presence *in SUBSCRIBE.
I need dialog based NOTIFY to be sent out on registration state-change.
Need pointers and help on the topic, looking forward to some feedback.
Regards, Sammy
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Thanks Daniel for replying, Yes the BLF/Callstates are working fine. Problem arise when a phone reboots and initially has no Lights indication.
These are the traces from a Working old-box(not-kamailio) - Kindly guide why my Kamailio is unable to send the "immediate NOTIFY" regarding the current state of the subscribed extension. If it can do that then I don't need to write anything.
SUBSCRIBE sip:314@presence.voipguy.ca SIP/2.0. Via: SIP/2.0/UDP 10.0.2.95:5060;branch=z9hG4bK-5ef31b0b. From: "299" sip:299@presence.voipguy.ca;tag=40ab701f5717f5e9. To: sip:314@presence.voipguy.ca. Call-ID: 7f166cd7-a89e6091@10.0.2.95. CSeq: 7888 SUBSCRIBE. Max-Forwards: 70. Contact: "299" sip:299@10.0.2.95:5060. Accept: application/dialog-info+xml. Accept: application/x-broadworks-hoteling+xml. Expires: 1800. Event: dialog. User-Agent: Cisco/SPA504G-7.5.6. Content-Length: 0. .
Server_IP:5060 -> Client_IP:1042
SIP/2.0 202 Accepted. v:SIP/2.0/UDP 10.0.2.95:5060 ;branch=z9hG4bK-5ef31b0b;received=Server_IP;rport=1042. f:"299"sip:299@presence.voipguy.ca;tag=40ab701f5717f5e9. t:sip:314@presence.voipguy.ca;tag=jYj0rSoBG7KA. i:7f166cd7-a89e6091@10.0.2.95. CSeq:7888 SUBSCRIBE. m:sip:314@Client_IP:5060. Expires:1800. User-Agent:HV. Allow:INVITE,ACK,BYE,CANCEL,OPTIONS,MESSAGE,INFO,UPDATE,REGISTER,REFER,NOTIFY,PUBLISH,SUBSCRIBE. k:timer,path,replaces. u:talk,hold,conference,presence,as-feature-event,dialog,line-seize,call-info,sla,include-session-description,presence.winfo,message-summary,refer. Subscription-State:active;expires=1800. l:0. .
Server_IP:5060 -> Client_IP:1042
NOTIFY sip:299@10.0.2.95:5060 SIP/2.0. v:SIP/2.0/UDP Client_IP;rport;branch=z9hG4bKUQ5v41FcK0Bvm. Route:sip:Server_IP:1042;transport=udp. Max-Forwards:70. f:sip:314@presence.voipguy.ca;tag=jYj0rSoBG7KA. t:"299"sip:299@presence.voipguy.ca;tag=40ab701f5717f5e9. i:7f166cd7-a89e6091@10.0.2.95. CSeq:261575252 NOTIFY. m:sip:314@Client_IP:5060. User-Agent:HV. Allow:INVITE,ACK,BYE,CANCEL,OPTIONS,MESSAGE,INFO,UPDATE,REGISTER,REFER,NOTIFY,PUBLISH,SUBSCRIBE. k:timer,path,replaces. o:dialog. u:talk,hold,conference,presence,as-feature-event,dialog,line-seize,call-info,sla,include-session-description,presence.winfo,message-summary,refer. Subscription-State:active;expires=1800. c:application/dialog-info+xml. l:166. . <?xml version="1.0"?> <dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="0" state="full" entity="sip:314@presence.voipguy.ca"> </dialog-info>
Client_IP:1042 -> Server_IP:5060
SIP/2.0 200 OK. t:"299"sip:299@presence.voipguy.ca;tag=40ab701f5717f5e9. f:sip:314@presence.voipguy.ca;tag=jYj0rSoBG7KA. i:7f166cd7-a89e6091@10.0.2.95. CSeq:261575252 NOTIFY. v:SIP/2.0/UDP Client_IP;branch=z9hG4bKUQ5v41FcK0Bvm. Server: Cisco/SPA504G-7.5.6. Content-Length: 0. .
Regards, Sammy
On Mon, Mar 6, 2017 at 2:22 AM, Daniel-Constantin Mierla miconda@gmail.com wrote:
Hello,
from your description, I don't see a problem from the specs point of view, but more like something that you would like to have.
If UA subscribers only for dialog event, then it gets NOTIFY requests only for dialog states (new call, ..., termintated call). When it subscribers for presence, then it gets UA availability states.
And I think this is what you also get based on description. Am I wright?
Mixing the states of presence for dialog notifications is not possible, not in the specs, but eventually you can write a module yourself and map as you want/need presence states over dialog states.
Cheers, Daniel On 03/03/2017 19:13, SamyGo wrote:
Hi, I'm in need of making/tweak an existing Kamailio Presence setup which is giving some tough time.
*Whats already working:* BLF dialog states changes are already sent across the users. SCA is working as well.
*What isn't working:* When a User comes online then it sends SUBSCRIBE with *Event: dialog* and don't get notified of its subscribers state right then unless the monitored extensions make a call (BLF works)
*Why is it not working: * As evident from wireshark traces, the user IP phones (Test sets: Polycoms, Yealink, CISCO, Grandstream) don't send our *Event: presence* rather only *Event:dialog* and Kamailio do not send NOTIFY out to everyone. Though yes there is an internally generated PUBLISH seen and handled properly upon registration state changes.
Jitsi has been tested and Kamailio send out these registration state change info to jitsi, somce jitsi sends *Event:presence *in SUBSCRIBE.
I need dialog based NOTIFY to be sent out on registration state-change.
Need pointers and help on the topic, looking forward to some feedback.
Regards, Sammy
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - Mar 6-8 (Europe) and Mar 20-22 (USA) - www.asipto.com Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
You should get an initial NOTIFY when you subscribe. Can you share the parts of your config that are relevant to presence/pua/etc.?
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of SamyGo Sent: 06 March 2017 15:50 To: Daniel-Constantin Mierla miconda@gmail.com; Kamailio (SER) - Users Mailing List sr-users@lists.sip-router.org Subject: Re: [SR-Users] Kamailio Presence help required.
Thanks Daniel for replying, Yes the BLF/Callstates are working fine. Problem arise when a phone reboots and initially has no Lights indication.
These are the traces from a Working old-box(not-kamailio) - Kindly guide why my Kamailio is unable to send the "immediate NOTIFY" regarding the current state of the subscribed extension. If it can do that then I don't need to write anything.
SUBSCRIBE sip:314@presence.voipguy.camailto:sip%3A314@presence.voipguy.ca SIP/2.0. Via: SIP/2.0/UDP 10.0.2.95:5060;branch=z9hG4bK-5ef31b0b. From: "299" <sip:299@presence.voipguy.camailto:sip%3A299@presence.voipguy.ca>;tag=40ab701f5717f5e9. To: <sip:314@presence.voipguy.camailto:sip%3A314@presence.voipguy.ca>. Call-ID: 7f166cd7-a89e6091@10.0.2.95mailto:7f166cd7-a89e6091@10.0.2.95. CSeq: 7888 SUBSCRIBE. Max-Forwards: 70. Contact: "299" <sip:299@10.0.2.95:5060http://sip:299@10.0.2.95:5060>. Accept: application/dialog-info+xml. Accept: application/x-broadworks-hoteling+xml. Expires: 1800. Event: dialog. User-Agent: Cisco/SPA504G-7.5.6. Content-Length: 0. .
Server_IP:5060 -> Client_IP:1042
SIP/2.0 202 Accepted. v:SIP/2.0/UDP 10.0.2.95:5060;branch=z9hG4bK-5ef31b0b;received=Server_IP;rport=1042. f:"299"<sip:299@presence.voipguy.camailto:sip%3A299@presence.voipguy.ca>;tag=40ab701f5717f5e9. t:<sip:314@presence.voipguy.camailto:sip%3A314@presence.voipguy.ca>;tag=jYj0rSoBG7KA. i:7f166cd7-a89e6091@10.0.2.95mailto:i%3A7f166cd7-a89e6091@10.0.2.95. CSeq:7888 SUBSCRIBE. m:sip:314@Client_IP:5060. Expires:1800. User-Agent:HV. Allow:INVITE,ACK,BYE,CANCEL,OPTIONS,MESSAGE,INFO,UPDATE,REGISTER,REFER,NOTIFY,PUBLISH,SUBSCRIBE. k:timer,path,replaces. u:talk,hold,conference,presence,as-feature-event,dialog,line-seize,call-info,sla,include-session-description,presence.winfo,message-summary,refer. Subscription-State:active;expires=1800. l:0. .
Server_IP:5060 -> Client_IP:1042
NOTIFY sip:299@10.0.2.95:5060http://sip:299@10.0.2.95:5060 SIP/2.0. v:SIP/2.0/UDP Client_IP;rport;branch=z9hG4bKUQ5v41FcK0Bvm. Route:sip:Server_IP:1042;transport=udp. Max-Forwards:70. f:<sip:314@presence.voipguy.camailto:sip%3A314@presence.voipguy.ca>;tag=jYj0rSoBG7KA. t:"299"<sip:299@presence.voipguy.camailto:sip%3A299@presence.voipguy.ca>;tag=40ab701f5717f5e9. i:7f166cd7-a89e6091@10.0.2.95mailto:i%3A7f166cd7-a89e6091@10.0.2.95. CSeq:261575252 NOTIFY. m:sip:314@Client_IP:5060. User-Agent:HV. Allow:INVITE,ACK,BYE,CANCEL,OPTIONS,MESSAGE,INFO,UPDATE,REGISTER,REFER,NOTIFY,PUBLISH,SUBSCRIBE. k:timer,path,replaces. o:dialog. u:talk,hold,conference,presence,as-feature-event,dialog,line-seize,call-info,sla,include-session-description,presence.winfo,message-summary,refer. Subscription-State:active;expires=1800. c:application/dialog-info+xml. l:166. . <?xml version="1.0"?> <dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="0" state="full" entity="sip:314@presence.voipguy.ca<mailto:sip%3A314@presence.voipguy.ca>"> </dialog-info>
Client_IP:1042 -> Server_IP:5060
SIP/2.0 200 OK. t:"299"<sip:299@presence.voipguy.camailto:sip%3A299@presence.voipguy.ca>;tag=40ab701f5717f5e9. f:<sip:314@presence.voipguy.camailto:sip%3A314@presence.voipguy.ca>;tag=jYj0rSoBG7KA. i:7f166cd7-a89e6091@10.0.2.95mailto:i%3A7f166cd7-a89e6091@10.0.2.95. CSeq:261575252 NOTIFY. v:SIP/2.0/UDP Client_IP;branch=z9hG4bKUQ5v41FcK0Bvm. Server: Cisco/SPA504G-7.5.6. Content-Length: 0. .
Regards, Sammy
On Mon, Mar 6, 2017 at 2:22 AM, Daniel-Constantin Mierla <miconda@gmail.commailto:miconda@gmail.com> wrote:
Hello,
from your description, I don't see a problem from the specs point of view, but more like something that you would like to have.
If UA subscribers only for dialog event, then it gets NOTIFY requests only for dialog states (new call, ..., termintated call). When it subscribers for presence, then it gets UA availability states.
And I think this is what you also get based on description. Am I wright?
Mixing the states of presence for dialog notifications is not possible, not in the specs, but eventually you can write a module yourself and map as you want/need presence states over dialog states.
Cheers, Daniel On 03/03/2017 19:13, SamyGo wrote: Hi, I'm in need of making/tweak an existing Kamailio Presence setup which is giving some tough time. Whats already working: BLF dialog states changes are already sent across the users. SCA is working as well.
What isn't working: When a User comes online then it sends SUBSCRIBE with Event: dialog and don't get notified of its subscribers state right then unless the monitored extensions make a call (BLF works) Why is it not working: As evident from wireshark traces, the user IP phones (Test sets: Polycoms, Yealink, CISCO, Grandstream) don't send our Event: presence rather only Event:dialog and Kamailio do not send NOTIFY out to everyone. Though yes there is an internally generated PUBLISH seen and handled properly upon registration state changes.
Jitsi has been tested and Kamailio send out these registration state change info to jitsi, somce jitsi sends Event:presence in SUBSCRIBE.
I need dialog based NOTIFY to be sent out on registration state-change.
Need pointers and help on the topic, looking forward to some feedback.
Regards, Sammy
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
www.twitter.com/micondahttp://www.twitter.com/miconda -- www.linkedin.com/in/micondahttp://www.linkedin.com/in/miconda
Kamailio Advanced Training - Mar 6-8 (Europe) and Mar 20-22 (USA) - www.asipto.comhttp://www.asipto.com
Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.comhttp://www.kamailioworld.com
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi, Samy.
Point, there is 2 modes of presence. Based on 'presence' and 'dialog'. Only 'presence' indicates states like online/offline, 'dialog' indicates only different call states, but also hold more info about a call. In 'dialog' case XML does not even has an option to indicate, that phone is online or offline.
Refer to https://tools.ietf.org/html/rfc3856 and https://tools.ietf.org/html/rfc4235 So, when phone subscribes to 'dialog', according to rfc, they just want to know active states and not care about online/offline.
Regards, Igor
6 марта 2017 г., 18:00 +0200, Phil Lavin phil.lavin@cloudcall.com, писал:
You should get an initial NOTIFY when you subscribe. Can you share the parts of your config that are relevant to presence/pua/etc.?
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of SamyGo Sent: 06 March 2017 15:50 To: Daniel-Constantin Mierla miconda@gmail.com; Kamailio (SER) - Users Mailing List sr-users@lists.sip-router.org Subject: Re: [SR-Users] Kamailio Presence help required.
Thanks Daniel for replying,
Yes the BLF/Callstates are working fine. Problem arise when a phone reboots and initially has no Lights indication.
These are the traces from a Working old-box(not-kamailio) - Kindly guide why my Kamailio is unable to send the "immediate NOTIFY" regarding the current state of the subscribed extension. If it can do that then I don't need to write anything.
SUBSCRIBE sip:314@presence.voipguy.ca (mailto:sip%3A314@presence.voipguy.ca) SIP/2.0.
Via: SIP/2.0/UDP 10.0.2.95:5060;branch=z9hG4bK-5ef31b0b.
From: "299" <sip:299@presence.voipguy.ca (mailto:sip%3A299@presence.voipguy.ca)>;tag=40ab701f5717f5e9.
To: <sip:314@presence.voipguy.ca (mailto:sip%3A314@presence.voipguy.ca)>.
Call-ID: 7f166cd7-a89e6091@10.0.2.95 (mailto:7f166cd7-a89e6091@10.0.2.95).
CSeq: 7888 SUBSCRIBE.
Max-Forwards: 70.
Contact: "299" <sip:299@10.0.2.95:5060 (http://sip:299@10.0.2.95:5060)%3E.
Accept: application/dialog-info+xml.
Accept: application/x-broadworks-hoteling+xml.
Expires: 1800.
Event: dialog.
User-Agent: Cisco/SPA504G-7.5.6.
Content-Length: 0.
.
Server_IP:5060 -> Client_IP:1042
SIP/2.0 202 Accepted.
v:SIP/2.0/UDP 10.0.2.95:5060;branch=z9hG4bK-5ef31b0b;received=Server_IP;rport=1042.
f:"299"<sip:299@presence.voipguy.ca (mailto:sip%3A299@presence.voipguy.ca)>;tag=40ab701f5717f5e9.
t:<sip:314@presence.voipguy.ca (mailto:sip%3A314@presence.voipguy.ca)>;tag=jYj0rSoBG7KA.
i:7f166cd7-a89e6091@10.0.2.95 (mailto:i%3A7f166cd7-a89e6091@10.0.2.95).
CSeq:7888 SUBSCRIBE.
Expires:1800.
User-Agent:HV.
Allow:INVITE,ACK,BYE,CANCEL,OPTIONS,MESSAGE,INFO,UPDATE,REGISTER,REFER,NOTIFY,PUBLISH,SUBSCRIBE.
k:timer,path,replaces.
u:talk,hold,conference,presence,as-feature-event,dialog,line-seize,call-info,sla,include-session-description,presence.winfo,message-summary,refer.
Subscription-State:active;expires=1800.
l:0.
.
Server_IP:5060 -> Client_IP:1042
NOTIFY sip:299@10.0.2.95:5060 (http://sip:299@10.0.2.95:5060) SIP/2.0.
v:SIP/2.0/UDP Client_IP;rport;branch=z9hG4bKUQ5v41FcK0Bvm.
Route:sip:Server_IP:1042;transport=udp.
Max-Forwards:70.
f:<sip:314@presence.voipguy.ca (mailto:sip%3A314@presence.voipguy.ca)>;tag=jYj0rSoBG7KA.
t:"299"<sip:299@presence.voipguy.ca (mailto:sip%3A299@presence.voipguy.ca)>;tag=40ab701f5717f5e9.
i:7f166cd7-a89e6091@10.0.2.95 (mailto:i%3A7f166cd7-a89e6091@10.0.2.95).
CSeq:261575252 (tel:261575252) NOTIFY.
m:sip:314@Client_IP:5060.
User-Agent:HV.
Allow:INVITE,ACK,BYE,CANCEL,OPTIONS,MESSAGE,INFO,UPDATE,REGISTER,REFER,NOTIFY,PUBLISH,SUBSCRIBE.
k:timer,path,replaces.
o:dialog.
u:talk,hold,conference,presence,as-feature-event,dialog,line-seize,call-info,sla,include-session-description,presence.winfo,message-summary,refer.
Subscription-State:active;expires=1800.
c:application/dialog-info+xml.
l:166.
.
<?xml version="1.0"?>
<dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="0" state="full" entity="sip:314@presence.voipguy.ca (mailto:sip%3A314@presence.voipguy.ca)">
</dialog-info>
Client_IP:1042 -> Server_IP:5060
SIP/2.0 200 OK.
t:"299"<sip:299@presence.voipguy.ca (mailto:sip%3A299@presence.voipguy.ca)>;tag=40ab701f5717f5e9.
f:<sip:314@presence.voipguy.ca (mailto:sip%3A314@presence.voipguy.ca)>;tag=jYj0rSoBG7KA.
i:7f166cd7-a89e6091@10.0.2.95 (mailto:i%3A7f166cd7-a89e6091@10.0.2.95).
CSeq:261575252 (tel:261575252) NOTIFY.
v:SIP/2.0/UDP Client_IP;branch=z9hG4bKUQ5v41FcK0Bvm.
Server: Cisco/SPA504G-7.5.6.
Content-Length: 0.
.
Regards,
Sammy
On Mon, Mar 6, 2017 at 2:22 AM, Daniel-Constantin Mierla <miconda@gmail.com (mailto:miconda@gmail.com)> wrote:
Hello,
from your description, I don't see a problem from the specs point of view, but more like something that you would like to have.
If UA subscribers only for dialog event, then it gets NOTIFY requests only for dialog states (new call, ..., termintated call). When it subscribers for presence, then it gets UA availability states.
And I think this is what you also get based on description. Am I wright?
Mixing the states of presence for dialog notifications is not possible, not in the specs, but eventually you can write a module yourself and map as you want/need presence states over dialog states.
Cheers, Daniel
On 03/03/2017 19:13, SamyGo wrote:
Hi, I'm in need of making/tweak an existing Kamailio Presence setup which is giving some tough time.
Whats already working:
BLF dialog states changes are already sent across the users. SCA is working as well.
What isn't working:
When a User comes online then it sends SUBSCRIBE with Event: dialog and don't get notified of its subscribers state right then unless the monitored extensions make a call (BLF works)
Why is it not working:
As evident from wireshark traces, the user IP phones (Test sets: Polycoms, Yealink, CISCO, Grandstream) don't send our Event: presence rather only Event:dialog and Kamailio do not send NOTIFY out to everyone. Though yes there is an internally generated PUBLISH seen and handled properly upon registration state changes.
Jitsi has been tested and Kamailio send out these registration state change info to jitsi, somce jitsi sends Event:presence in SUBSCRIBE.
I need dialog based NOTIFY to be sent out on registration state-change.
Need pointers and help on the topic, looking forward to some feedback.
Regards, Sammy
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org (mailto:sr-users@lists.sip-router.org) http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla www.twitter.com/miconda (http://www.twitter.com/miconda) -- www.linkedin.com/in/miconda (http://www.linkedin.com/in/miconda) Kamailio Advanced Training - Mar 6-8 (Europe) and Mar 20-22 (USA) - www.asipto.com (http://www.asipto.com) Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com (http://www.kamailioworld.com)
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org (mailto:sr-users@lists.sip-router.org) http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Phil, here are all the Presence related modules and their params.
Igor, I go clearly understand that difference and I accept it. However, Im finding it difficult to digest that FreeSWITCH sends back initial NOTIFY and phone light works while Kamailio is unable to do the same.
#!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "presence_dialoginfo.so" loadmodule "presence_reginfo.so" loadmodule "pua.so" loadmodule "pua_dialoginfo.so" loadmodule "pua_reginfo.so" loadmodule "pua_usrloc.so" #!endif
#!ifdef WITH_PRESENCE # ----- presence params ----- modparam("presence", "db_url", DBURL) modparam("presence", "server_address", "sip:ServerIP:5060" ) modparam("presence", "send_fast_notify", 0) modparam("presence", "db_update_period", 20) modparam("presence", "clean_period", 40) modparam("presence", "subs_db_mode", 2) modparam("presence", "fetch_rows", 1000)
# ----- presence_xml params ----- modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 1) modparam("presence_xml", "force_dummy_presence", 1)
# ----- presence_dialoginfo params ----- modparam("presence_dialoginfo", "force_single_dialog", 1) modparam("presence_dialoginfo", "force_dummy_dialog", 0)
# ----- pua params ----- modparam("pua", "db_url", DBURL) modparam("pua", "db_mode", 2) modparam("pua", "update_period", 60) modparam("pua", "dlginfo_increase_version", 0) modparam("pua", "reginfo_increase_version", 0) modparam("pua", "check_remote_contact", 1) modparam("pua", "fetch_rows", 1000)
# ----- pua_dialoginfo params ----- modparam("pua_dialoginfo", "include_callid", 1) modparam("pua_dialoginfo", "send_publish_flag", FLT_DLGINFO) modparam("pua_dialoginfo", "caller_confirmed", 0) modparam("pua_dialoginfo", "include_tags", 1) modparam("pua_dialoginfo", "override_lifetime", 124)
modparam("pua_reginfo|pua_usrloc", "default_domain", "voipguy.ca") modparam("pua_reginfo", "server_address", "sip:REGINFO@ServerIP") modparam("pua_usrloc", "branch_flag", FLT_DLGINFO)
#!endif
Thanks for helping me out on this.
Regards, Sammy
On Mon, Mar 6, 2017 at 4:31 PM, Igor Olhovskiy igorolhovskiy@gmail.com wrote:
Hi, Samy.
Point, there is 2 modes of presence. Based on 'presence' and 'dialog'. Only 'presence' indicates states like online/offline, 'dialog' indicates only different call states, but also hold more info about a call. In 'dialog' case XML does not even has an option to indicate, that phone is online or offline.
Refer to *https://tools.ietf.org/html/rfc3856* https://tools.ietf.org/html/rfc3856 and *https://tools.ietf.org/html/rfc4235* https://tools.ietf.org/html/rfc4235 So, when phone subscribes to 'dialog', according to rfc, they just want to know active states and not care about online/offline.
Regards, Igor
6 марта 2017 г., 18:00 +0200, Phil Lavin phil.lavin@cloudcall.com, писал:
You should get an initial NOTIFY when you subscribe. Can you share the parts of your config that are relevant to presence/pua/etc.?
*From:* sr-users [mailto:sr-users-bounces@lists.sip-router.org] *On Behalf Of* SamyGo *Sent:* 06 March 2017 15:50 *To:* Daniel-Constantin Mierla miconda@gmail.com; Kamailio (SER) - Users Mailing List sr-users@lists.sip-router.org *Subject:* Re: [SR-Users] Kamailio Presence help required.
Thanks Daniel for replying,
Yes the BLF/Callstates are working fine. Problem arise when a phone reboots and initially has no Lights indication.
These are the traces from a Working old-box(not-kamailio) - Kindly guide why my Kamailio is unable to send the "immediate NOTIFY" regarding the current state of the subscribed extension. If it can do that then I don't need to write anything.
SUBSCRIBE sip:314@presence.voipguy.ca SIP/2.0.
Via: SIP/2.0/UDP 10.0.2.95:5060;branch=z9hG4bK-5ef31b0b.
From: "299" sip:299@presence.voipguy.ca;tag=40ab701f5717f5e9.
To: sip:314@presence.voipguy.ca.
Call-ID: 7f166cd7-a89e6091@10.0.2.95.
CSeq: 7888 SUBSCRIBE.
Max-Forwards: 70.
Contact: "299" sip:299@10.0.2.95:5060.
Accept: application/dialog-info+xml.
Accept: application/x-broadworks-hoteling+xml.
Expires: 1800.
Event: dialog.
User-Agent: Cisco/SPA504G-7.5.6.
Content-Length: 0.
.
Server_IP:5060 -> Client_IP:1042
SIP/2.0 202 Accepted.
v:SIP/2.0/UDP 10.0.2.95:5060;branch=z9hG4bK-5ef31b0b;received=Server_IP; rport=1042.
f:"299"sip:299@presence.voipguy.ca;tag=40ab701f5717f5e9.
t:sip:314@presence.voipguy.ca;tag=jYj0rSoBG7KA.
i:7f166cd7-a89e6091@10.0.2.95.
CSeq:7888 SUBSCRIBE.
Expires:1800.
User-Agent:HV.
Allow:INVITE,ACK,BYE,CANCEL,OPTIONS,MESSAGE,INFO,UPDATE, REGISTER,REFER,NOTIFY,PUBLISH,SUBSCRIBE.
k:timer,path,replaces.
u:talk,hold,conference,presence,as-feature-event, dialog,line-seize,call-info,sla,include-session- description,presence.winfo,message-summary,refer.
Subscription-State:active;expires=1800.
l:0.
.
Server_IP:5060 -> Client_IP:1042
NOTIFY sip:299@10.0.2.95:5060 SIP/2.0.
v:SIP/2.0/UDP Client_IP;rport;branch=z9hG4bKUQ5v41FcK0Bvm.
Route:sip:Server_IP:1042;transport=udp.
Max-Forwards:70.
f:sip:314@presence.voipguy.ca;tag=jYj0rSoBG7KA.
t:"299"sip:299@presence.voipguy.ca;tag=40ab701f5717f5e9.
i:7f166cd7-a89e6091@10.0.2.95.
CSeq:261575252 NOTIFY.
m:sip:314@Client_IP:5060.
User-Agent:HV.
Allow:INVITE,ACK,BYE,CANCEL,OPTIONS,MESSAGE,INFO,UPDATE, REGISTER,REFER,NOTIFY,PUBLISH,SUBSCRIBE.
k:timer,path,replaces.
o:dialog.
u:talk,hold,conference,presence,as-feature-event, dialog,line-seize,call-info,sla,include-session- description,presence.winfo,message-summary,refer.
Subscription-State:active;expires=1800.
c:application/dialog-info+xml.
l:166.
.
<?xml version="1.0"?>
<dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="0" state="full" entity="sip:314@presence.voipguy.ca">
</dialog-info>
Client_IP:1042 -> Server_IP:5060
SIP/2.0 200 OK.
t:"299"sip:299@presence.voipguy.ca;tag=40ab701f5717f5e9.
f:sip:314@presence.voipguy.ca;tag=jYj0rSoBG7KA.
i:7f166cd7-a89e6091@10.0.2.95.
CSeq:261575252 NOTIFY.
v:SIP/2.0/UDP Client_IP;branch=z9hG4bKUQ5v41FcK0Bvm.
Server: Cisco/SPA504G-7.5.6.
Content-Length: 0.
.
Regards,
Sammy
On Mon, Mar 6, 2017 at 2:22 AM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:
Hello,
from your description, I don't see a problem from the specs point of view, but more like something that you would like to have.
If UA subscribers only for dialog event, then it gets NOTIFY requests only for dialog states (new call, ..., termintated call). When it subscribers for presence, then it gets UA availability states.
And I think this is what you also get based on description. Am I wright?
Mixing the states of presence for dialog notifications is not possible, not in the specs, but eventually you can write a module yourself and map as you want/need presence states over dialog states.
Cheers, Daniel
On 03/03/2017 19:13, SamyGo wrote:
Hi, I'm in need of making/tweak an existing Kamailio Presence setup which is giving some tough time.
*Whats already working:*
BLF dialog states changes are already sent across the users. SCA is working as well.
*What isn't working:*
When a User comes online then it sends SUBSCRIBE with *Event: dialog* and don't get notified of its subscribers state right then unless the monitored extensions make a call (BLF works)
*Why is it not working:*
As evident from wireshark traces, the user IP phones (Test sets: Polycoms, Yealink, CISCO, Grandstream) don't send our *Event: presence* rather only *Event:dialog* and Kamailio do not send NOTIFY out to everyone. Though yes there is an internally generated PUBLISH seen and handled properly upon registration state changes.
Jitsi has been tested and Kamailio send out these registration state change info to jitsi, somce jitsi sends *Event:presence* in SUBSCRIBE.
I need dialog based NOTIFY to be sent out on registration state-change.
Need pointers and help on the topic, looking forward to some feedback.
Regards, Sammy
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - Mar 6-8 (Europe) and Mar 20-22 (USA) - www.asipto.com
Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Looks fairly sane. Try setting “pua” db_mode to 0. db_mode 2 takes a very different path through the code of the pua module and we have found it to be somewhat broken beyond repair. Our config is as follows. You may not have some of the stuff highlighted in yellow as I recently added those features to Kamailio. Depends which version you’re running. They’re not necessary for normal operation, however.
modparam("presence", "db_url", DBURL) modparam("presence", "db_update_period", 20) modparam("presence", "clean_period", 60) modparam("presence", "local_log_facility", "LOG_LOCAL3") modparam("presence", "max_expires", 14430)
modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 1)
modparam("pua", "db_url", DBURL) modparam("pua", "db_mode", 0) # Memory only. Required due to the "multiple states for a single dialog" bug modparam("pua", "update_period", 20) modparam("pua", "outbound_proxy", MY_SIP_URL)
modparam("pua_dialoginfo", "send_publish_flag", FLT_DLGINFO) modparam("pua_dialoginfo", "override_lifetime", 14420) modparam("pua_dialoginfo", "callee_trying", 1) modparam("pua_dialoginfo", "disable_caller_publish_flag", FLT_DISABLE_CALLER_PUBLISH) modparam("pua_dialoginfo", "disable_callee_publish_flag", FLT_DISABLE_CALLEE_PUBLISH)
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of SamyGo Sent: 06 March 2017 22:51 To: Kamailio (SER) - Users Mailing List sr-users@lists.sip-router.org Subject: Re: [SR-Users] Kamailio Presence help required.
Phil, here are all the Presence related modules and their params.
Igor, I go clearly understand that difference and I accept it. However, Im finding it difficult to digest that FreeSWITCH sends back initial NOTIFY and phone light works while Kamailio is unable to do the same.
#!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "presence_dialoginfo.so" loadmodule "presence_reginfo.so" loadmodule "pua.so" loadmodule "pua_dialoginfo.so" loadmodule "pua_reginfo.so" loadmodule "pua_usrloc.so" #!endif
#!ifdef WITH_PRESENCE # ----- presence params ----- modparam("presence", "db_url", DBURL) modparam("presence", "server_address", "sip:ServerIP:5060" ) modparam("presence", "send_fast_notify", 0) modparam("presence", "db_update_period", 20) modparam("presence", "clean_period", 40) modparam("presence", "subs_db_mode", 2) modparam("presence", "fetch_rows", 1000)
# ----- presence_xml params ----- modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 1) modparam("presence_xml", "force_dummy_presence", 1)
# ----- presence_dialoginfo params ----- modparam("presence_dialoginfo", "force_single_dialog", 1) modparam("presence_dialoginfo", "force_dummy_dialog", 0)
# ----- pua params ----- modparam("pua", "db_url", DBURL) modparam("pua", "db_mode", 2) modparam("pua", "update_period", 60) modparam("pua", "dlginfo_increase_version", 0) modparam("pua", "reginfo_increase_version", 0) modparam("pua", "check_remote_contact", 1) modparam("pua", "fetch_rows", 1000)
# ----- pua_dialoginfo params ----- modparam("pua_dialoginfo", "include_callid", 1) modparam("pua_dialoginfo", "send_publish_flag", FLT_DLGINFO) modparam("pua_dialoginfo", "caller_confirmed", 0) modparam("pua_dialoginfo", "include_tags", 1) modparam("pua_dialoginfo", "override_lifetime", 124)
modparam("pua_reginfo|pua_usrloc", "default_domain", "voipguy.cahttp://voipguy.ca") modparam("pua_reginfo", "server_address", "sip:REGINFO@ServerIP") modparam("pua_usrloc", "branch_flag", FLT_DLGINFO)
#!endif
Thanks for helping me out on this.
Regards, Sammy
On Mon, Mar 6, 2017 at 4:31 PM, Igor Olhovskiy <igorolhovskiy@gmail.commailto:igorolhovskiy@gmail.com> wrote: Hi, Samy.
Point, there is 2 modes of presence. Based on 'presence' and 'dialog'. Only 'presence' indicates states like online/offline, 'dialog' indicates only different call states, but also hold more info about a call. In 'dialog' case XML does not even has an option to indicate, that phone is online or offline.
Refer to https://tools.ietf.org/html/rfc3856 and https://tools.ietf.org/html/rfc4235 So, when phone subscribes to 'dialog', according to rfc, they just want to know active states and not care about online/offline.
Regards, Igor
6 марта 2017 г., 18:00 +0200, Phil Lavin <phil.lavin@cloudcall.commailto:phil.lavin@cloudcall.com>, писал:
You should get an initial NOTIFY when you subscribe. Can you share the parts of your config that are relevant to presence/pua/etc.?
From: sr-users [mailto:sr-users-bounces@lists.sip-router.orgmailto:sr-users-bounces@lists.sip-router.org] On Behalf Of SamyGo Sent: 06 March 2017 15:50 To: Daniel-Constantin Mierla <miconda@gmail.commailto:miconda@gmail.com>; Kamailio (SER) - Users Mailing List <sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org> Subject: Re: [SR-Users] Kamailio Presence help required.
Thanks Daniel for replying, Yes the BLF/Callstates are working fine. Problem arise when a phone reboots and initially has no Lights indication.
These are the traces from a Working old-box(not-kamailio) - Kindly guide why my Kamailio is unable to send the "immediate NOTIFY" regarding the current state of the subscribed extension. If it can do that then I don't need to write anything.
SUBSCRIBE sip:314@presence.voipguy.camailto:sip%3A314@presence.voipguy.ca SIP/2.0. Via: SIP/2.0/UDP 10.0.2.95:5060;branch=z9hG4bK-5ef31b0b. From: "299" <sip:299@presence.voipguy.camailto:sip%3A299@presence.voipguy.ca>;tag=40ab701f5717f5e9. To: <sip:314@presence.voipguy.camailto:sip%3A314@presence.voipguy.ca>. Call-ID: 7f166cd7-a89e6091@10.0.2.95mailto:7f166cd7-a89e6091@10.0.2.95. CSeq: 7888 SUBSCRIBE. Max-Forwards: 70. Contact: "299" <sip:299@10.0.2.95:5060http://sip:299@10.0.2.95:5060>. Accept: application/dialog-info+xml. Accept: application/x-broadworks-hoteling+xml. Expires: 1800. Event: dialog. User-Agent: Cisco/SPA504G-7.5.6. Content-Length: 0. .
Server_IP:5060 -> Client_IP:1042
SIP/2.0 202 Accepted. v:SIP/2.0/UDP 10.0.2.95:5060;branch=z9hG4bK-5ef31b0b;received=Server_IP;rport=1042. f:"299"<sip:299@presence.voipguy.camailto:sip%3A299@presence.voipguy.ca>;tag=40ab701f5717f5e9. t:<sip:314@presence.voipguy.camailto:sip%3A314@presence.voipguy.ca>;tag=jYj0rSoBG7KA. i:7f166cd7-a89e6091@10.0.2.95mailto:i%3A7f166cd7-a89e6091@10.0.2.95. CSeq:7888 SUBSCRIBE. m:sip:314@Client_IP:5060. Expires:1800. User-Agent:HV. Allow:INVITE,ACK,BYE,CANCEL,OPTIONS,MESSAGE,INFO,UPDATE,REGISTER,REFER,NOTIFY,PUBLISH,SUBSCRIBE. k:timer,path,replaces. u:talk,hold,conference,presence,as-feature-event,dialog,line-seize,call-info,sla,include-session-description,presence.winfo,message-summary,refer. Subscription-State:active;expires=1800. l:0. .
Server_IP:5060 -> Client_IP:1042
NOTIFY sip:299@10.0.2.95:5060http://sip:299@10.0.2.95:5060 SIP/2.0. v:SIP/2.0/UDP Client_IP;rport;branch=z9hG4bKUQ5v41FcK0Bvm. Route:sip:Server_IP:1042;transport=udp. Max-Forwards:70. f:<sip:314@presence.voipguy.camailto:sip%3A314@presence.voipguy.ca>;tag=jYj0rSoBG7KA. t:"299"<sip:299@presence.voipguy.camailto:sip%3A299@presence.voipguy.ca>;tag=40ab701f5717f5e9. i:7f166cd7-a89e6091@10.0.2.95mailto:i%3A7f166cd7-a89e6091@10.0.2.95. CSeq:261575252tel:261575252 NOTIFY. m:sip:314@Client_IP:5060. User-Agent:HV. Allow:INVITE,ACK,BYE,CANCEL,OPTIONS,MESSAGE,INFO,UPDATE,REGISTER,REFER,NOTIFY,PUBLISH,SUBSCRIBE. k:timer,path,replaces. o:dialog. u:talk,hold,conference,presence,as-feature-event,dialog,line-seize,call-info,sla,include-session-description,presence.winfo,message-summary,refer. Subscription-State:active;expires=1800. c:application/dialog-info+xml. l:166. . <?xml version="1.0"?> <dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="0" state="full" entity="sip:314@presence.voipguy.ca<mailto:sip%3A314@presence.voipguy.ca>"> </dialog-info>
Client_IP:1042 -> Server_IP:5060
SIP/2.0 200 OK. t:"299"<sip:299@presence.voipguy.camailto:sip%3A299@presence.voipguy.ca>;tag=40ab701f5717f5e9. f:<sip:314@presence.voipguy.camailto:sip%3A314@presence.voipguy.ca>;tag=jYj0rSoBG7KA. i:7f166cd7-a89e6091@10.0.2.95mailto:i%3A7f166cd7-a89e6091@10.0.2.95. CSeq:261575252tel:261575252 NOTIFY. v:SIP/2.0/UDP Client_IP;branch=z9hG4bKUQ5v41FcK0Bvm. Server: Cisco/SPA504G-7.5.6. Content-Length: 0. .
Regards, Sammy
On Mon, Mar 6, 2017 at 2:22 AM, Daniel-Constantin Mierla <miconda@gmail.commailto:miconda@gmail.com> wrote:
Hello,
from your description, I don't see a problem from the specs point of view, but more like something that you would like to have.
If UA subscribers only for dialog event, then it gets NOTIFY requests only for dialog states (new call, ..., termintated call). When it subscribers for presence, then it gets UA availability states.
And I think this is what you also get based on description. Am I wright?
Mixing the states of presence for dialog notifications is not possible, not in the specs, but eventually you can write a module yourself and map as you want/need presence states over dialog states.
Cheers, Daniel On 03/03/2017 19:13, SamyGo wrote: Hi, I'm in need of making/tweak an existing Kamailio Presence setup which is giving some tough time. Whats already working: BLF dialog states changes are already sent across the users. SCA is working as well.
What isn't working: When a User comes online then it sends SUBSCRIBE with Event: dialog and don't get notified of its subscribers state right then unless the monitored extensions make a call (BLF works) Why is it not working: As evident from wireshark traces, the user IP phones (Test sets: Polycoms, Yealink, CISCO, Grandstream) don't send our Event: presence rather only Event:dialog and Kamailio do not send NOTIFY out to everyone. Though yes there is an internally generated PUBLISH seen and handled properly upon registration state changes.
Jitsi has been tested and Kamailio send out these registration state change info to jitsi, somce jitsi sends Event:presence in SUBSCRIBE.
I need dialog based NOTIFY to be sent out on registration state-change.
Need pointers and help on the topic, looking forward to some feedback.
Regards, Sammy
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
www.twitter.com/micondahttp://www.twitter.com/miconda -- www.linkedin.com/in/micondahttp://www.linkedin.com/in/miconda
Kamailio Advanced Training - Mar 6-8 (Europe) and Mar 20-22 (USA) - www.asipto.comhttp://www.asipto.com
Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.comhttp://www.kamailioworld.com
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi Phil, That did help improve the situation; but I've noticed that now when a phone boots up and sends for SUBSCRIBE its gets a NOTIFY for the request with state 'terminated' even if the other side is Online/Active.
Here is a sample of the Immediate NOTIFY:
To: <sip:135@presence.voipguy.ca sip%3A314@presence.voipguy.ca
;tag=2731947019
From: <sip:201@presence.voipguy.ca sip%3A314@presence.voipguy.ca
;tag=5d081ad8df67fd2b232f5240ec63c6ff-f422
CSeq: 2 NOTIFY Call-ID: 0_1231439266@192.168.1.19 Content-Length: 267 User-Agent: kamailio (4.4.4 (x86_64/linux)) Max-Forwards: 70 Event: dialog Contact: sip:Server_IP:5060 Subscription-State: active;expires=1800 Content-Type: application/dialog-info+xml
<?xml version="1.0"?> <dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="1" state="full" entity="sip:201@presence.voipguy.ca <sip%3A314@presence.voipguy.ca>"> <dialog id="615293b33c62dec073e05d9421e9f48b" direction="recipient"> <state>terminated</state> </dialog> </dialog-info>
In above case the 201 device was Registered but its state is set as terminated. Same signal goes for offline users as well. Is this a standard reply or something is missing ?
Thanks for your time Phil.
Regards, Sammy
On Tue, Mar 7, 2017 at 1:54 PM, Phil Lavin phil.lavin@cloudcall.com wrote:
Looks fairly sane. Try setting “pua” db_mode to 0. db_mode 2 takes a very different path through the code of the pua module and we have found it to be somewhat broken beyond repair. Our config is as follows. You may not have some of the stuff highlighted in yellow as I recently added those features to Kamailio. Depends which version you’re running. They’re not necessary for normal operation, however.
modparam("presence", "db_url", DBURL)
modparam("presence", "db_update_period", 20)
modparam("presence", "clean_period", 60)
modparam("presence", "local_log_facility", "LOG_LOCAL3")
modparam("presence", "max_expires", 14430)
modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml", "force_active", 1)
modparam("pua", "db_url", DBURL)
modparam("pua", "db_mode", 0) # Memory only. Required due to the "multiple states for a single dialog" bug
modparam("pua", "update_period", 20)
modparam("pua", "outbound_proxy", MY_SIP_URL)
modparam("pua_dialoginfo", "send_publish_flag", FLT_DLGINFO)
modparam("pua_dialoginfo", "override_lifetime", 14420)
modparam("pua_dialoginfo", "callee_trying", 1)
modparam("pua_dialoginfo", "disable_caller_publish_flag", FLT_DISABLE_CALLER_PUBLISH)
modparam("pua_dialoginfo", "disable_callee_publish_flag", FLT_DISABLE_CALLEE_PUBLISH)
*From:* sr-users [mailto:sr-users-bounces@lists.sip-router.org] *On Behalf Of *SamyGo *Sent:* 06 March 2017 22:51 *To:* Kamailio (SER) - Users Mailing List sr-users@lists.sip-router.org
*Subject:* Re: [SR-Users] Kamailio Presence help required.
Phil, here are all the Presence related modules and their params.
Igor, I go clearly understand that difference and I accept it. However, Im finding it difficult to digest that FreeSWITCH sends back initial NOTIFY and phone light works while Kamailio is unable to do the same.
#!ifdef WITH_PRESENCE
loadmodule "presence.so"
loadmodule "presence_xml.so"
loadmodule "presence_dialoginfo.so"
loadmodule "presence_reginfo.so"
loadmodule "pua.so"
loadmodule "pua_dialoginfo.so"
loadmodule "pua_reginfo.so"
loadmodule "pua_usrloc.so"
#!endif
#!ifdef WITH_PRESENCE
# ----- presence params -----
modparam("presence", "db_url", DBURL)
modparam("presence", "server_address", "sip:ServerIP:5060" )
modparam("presence", "send_fast_notify", 0)
modparam("presence", "db_update_period", 20)
modparam("presence", "clean_period", 40)
modparam("presence", "subs_db_mode", 2)
modparam("presence", "fetch_rows", 1000)
# ----- presence_xml params -----
modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml", "force_active", 1)
modparam("presence_xml", "force_dummy_presence", 1)
# ----- presence_dialoginfo params -----
modparam("presence_dialoginfo", "force_single_dialog", 1)
modparam("presence_dialoginfo", "force_dummy_dialog", 0)
# ----- pua params -----
modparam("pua", "db_url", DBURL)
modparam("pua", "db_mode", 2)
modparam("pua", "update_period", 60)
modparam("pua", "dlginfo_increase_version", 0)
modparam("pua", "reginfo_increase_version", 0)
modparam("pua", "check_remote_contact", 1)
modparam("pua", "fetch_rows", 1000)
# ----- pua_dialoginfo params -----
modparam("pua_dialoginfo", "include_callid", 1)
modparam("pua_dialoginfo", "send_publish_flag", FLT_DLGINFO)
modparam("pua_dialoginfo", "caller_confirmed", 0)
modparam("pua_dialoginfo", "include_tags", 1)
modparam("pua_dialoginfo", "override_lifetime", 124)
modparam("pua_reginfo|pua_usrloc", "default_domain", "voipguy.ca")
modparam("pua_reginfo", "server_address", "sip:REGINFO@ServerIP")
modparam("pua_usrloc", "branch_flag", FLT_DLGINFO)
#!endif
Thanks for helping me out on this.
Regards,
Sammy
On Mon, Mar 6, 2017 at 4:31 PM, Igor Olhovskiy igorolhovskiy@gmail.com wrote:
Hi, Samy.
Point, there is 2 modes of presence. Based on 'presence' and 'dialog'. Only 'presence' indicates states like online/offline, 'dialog' indicates only different call states, but also hold more info about a call. In 'dialog' case XML does not even has an option to indicate, that phone is online or offline.
Refer to https://tools.ietf.org/html/rfc3856 and https://tools.ietf.org/html/rfc4235 So, when phone subscribes to 'dialog', according to rfc, they just want to know active states and not care about online/offline.
Regards, Igor
6 марта 2017 г., 18:00 +0200, Phil Lavin phil.lavin@cloudcall.com, писал:
You should get an initial NOTIFY when you subscribe. Can you share the parts of your config that are relevant to presence/pua/etc.?
*From:* sr-users [mailto:sr-users-bounces@lists.sip-router.org] *On Behalf Of* SamyGo *Sent:* 06 March 2017 15:50 *To:* Daniel-Constantin Mierla miconda@gmail.com; Kamailio (SER) - Users Mailing List sr-users@lists.sip-router.org *Subject:* Re: [SR-Users] Kamailio Presence help required.
Thanks Daniel for replying,
Yes the BLF/Callstates are working fine. Problem arise when a phone reboots and initially has no Lights indication.
These are the traces from a Working old-box(not-kamailio) - Kindly guide why my Kamailio is unable to send the "immediate NOTIFY" regarding the current state of the subscribed extension. If it can do that then I don't need to write anything.
SUBSCRIBE sip:314@presence.voipguy.ca SIP/2.0.
Via: SIP/2.0/UDP 10.0.2.95:5060;branch=z9hG4bK-5ef31b0b.
From: "299" sip:299@presence.voipguy.ca;tag=40ab701f5717f5e9.
To: sip:314@presence.voipguy.ca.
Call-ID: 7f166cd7-a89e6091@10.0.2.95.
CSeq: 7888 SUBSCRIBE.
Max-Forwards: 70.
Contact: "299" sip:299@10.0.2.95:5060.
Accept: application/dialog-info+xml.
Accept: application/x-broadworks-hoteling+xml.
Expires: 1800.
Event: dialog.
User-Agent: Cisco/SPA504G-7.5.6.
Content-Length: 0.
.
Server_IP:5060 -> Client_IP:1042
SIP/2.0 202 Accepted.
v:SIP/2.0/UDP 10.0.2.95:5060;branch=z9hG4bK-5ef31b0b;received=Server_IP; rport=1042.
f:"299"sip:299@presence.voipguy.ca;tag=40ab701f5717f5e9.
t:sip:314@presence.voipguy.ca;tag=jYj0rSoBG7KA.
i:7f166cd7-a89e6091@10.0.2.95.
CSeq:7888 SUBSCRIBE.
Expires:1800.
User-Agent:HV.
Allow:INVITE,ACK,BYE,CANCEL,OPTIONS,MESSAGE,INFO,UPDATE, REGISTER,REFER,NOTIFY,PUBLISH,SUBSCRIBE.
k:timer,path,replaces.
u:talk,hold,conference,presence,as-feature-event, dialog,line-seize,call-info,sla,include-session- description,presence.winfo,message-summary,refer.
Subscription-State:active;expires=1800.
l:0.
.
Server_IP:5060 -> Client_IP:1042
NOTIFY sip:299@10.0.2.95:5060 SIP/2.0.
v:SIP/2.0/UDP Client_IP;rport;branch=z9hG4bKUQ5v41FcK0Bvm.
Route:sip:Server_IP:1042;transport=udp.
Max-Forwards:70.
f:sip:314@presence.voipguy.ca;tag=jYj0rSoBG7KA.
t:"299"sip:299@presence.voipguy.ca;tag=40ab701f5717f5e9.
i:7f166cd7-a89e6091@10.0.2.95.
CSeq:261575252 NOTIFY.
m:sip:314@Client_IP:5060.
User-Agent:HV.
Allow:INVITE,ACK,BYE,CANCEL,OPTIONS,MESSAGE,INFO,UPDATE, REGISTER,REFER,NOTIFY,PUBLISH,SUBSCRIBE.
k:timer,path,replaces.
o:dialog.
u:talk,hold,conference,presence,as-feature-event, dialog,line-seize,call-info,sla,include-session- description,presence.winfo,message-summary,refer.
Subscription-State:active;expires=1800.
c:application/dialog-info+xml.
l:166.
.
<?xml version="1.0"?>
<dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="0" state="full" entity="sip:314@presence.voipguy.ca">
</dialog-info>
Client_IP:1042 -> Server_IP:5060
SIP/2.0 200 OK.
t:"299"sip:299@presence.voipguy.ca;tag=40ab701f5717f5e9.
f:sip:314@presence.voipguy.ca;tag=jYj0rSoBG7KA.
i:7f166cd7-a89e6091@10.0.2.95.
CSeq:261575252 NOTIFY.
v:SIP/2.0/UDP Client_IP;branch=z9hG4bKUQ5v41FcK0Bvm.
Server: Cisco/SPA504G-7.5.6.
Content-Length: 0.
.
Regards,
Sammy
On Mon, Mar 6, 2017 at 2:22 AM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:
Hello,
from your description, I don't see a problem from the specs point of view, but more like something that you would like to have.
If UA subscribers only for dialog event, then it gets NOTIFY requests only for dialog states (new call, ..., termintated call). When it subscribers for presence, then it gets UA availability states.
And I think this is what you also get based on description. Am I wright?
Mixing the states of presence for dialog notifications is not possible, not in the specs, but eventually you can write a module yourself and map as you want/need presence states over dialog states.
Cheers, Daniel
On 03/03/2017 19:13, SamyGo wrote:
Hi, I'm in need of making/tweak an existing Kamailio Presence setup which is giving some tough time.
*Whats already working:*
BLF dialog states changes are already sent across the users. SCA is working as well.
*What isn't working:*
When a User comes online then it sends SUBSCRIBE with *Event: dialog* and don't get notified of its subscribers state right then unless the monitored extensions make a call (BLF works)
*Why is it not working:*
As evident from wireshark traces, the user IP phones (Test sets: Polycoms, Yealink, CISCO, Grandstream) don't send our *Event: presence* rather only *Event:dialog* and Kamailio do not send NOTIFY out to everyone. Though yes there is an internally generated PUBLISH seen and handled properly upon registration state changes.
Jitsi has been tested and Kamailio send out these registration state change info to jitsi, somce jitsi sends *Event:presence* in SUBSCRIBE.
I need dialog based NOTIFY to be sent out on registration state-change.
Need pointers and help on the topic, looking forward to some feedback.
Regards, Sammy
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - Mar 6-8 (Europe) and Mar 20-22 (USA) - www.asipto.com
Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
See what Igor mentioned previously about presence vs dialogs. The phone is subscribing for dialog-info and is being told about all the dialogs (calls) the UA is or has recently been on. In this case, 1 call which has ended (hence terminated state).
If the user was on a call at the time your phone registers, their light should go on.
I suggest also turning off “force_single_dialog” as it causes issues most of the time.
Cheers
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of SamyGo Sent: 08 March 2017 15:38 To: Kamailio (SER) - Users Mailing List sr-users@lists.sip-router.org Subject: Re: [SR-Users] Kamailio Presence help required.
Hi Phil, That did help improve the situation; but I've noticed that now when a phone boots up and sends for SUBSCRIBE its gets a NOTIFY for the request with state 'terminated' even if the other side is Online/Active.
Here is a sample of the Immediate NOTIFY:
To: <sip:135@presence.voipguy.camailto:sip%3A314@presence.voipguy.ca>;tag=2731947019 From: <sip:201@presence.voipguy.camailto:sip%3A314@presence.voipguy.ca>;tag=5d081ad8df67fd2b232f5240ec63c6ff-f422 CSeq: 2 NOTIFY Call-ID: 0_1231439266@192.168.1.19mailto:0_1231439266@192.168.1.19 Content-Length: 267 User-Agent: kamailio (4.4.4 (x86_64/linux)) Max-Forwards: 70 Event: dialog Contact: sip:Server_IP:5060 Subscription-State: active;expires=1800 Content-Type: application/dialog-info+xml
<?xml version="1.0"?> <dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="1" state="full" entity="sip:201@presence.voipguy.ca<mailto:sip%3A314@presence.voipguy.ca>"> <dialog id="615293b33c62dec073e05d9421e9f48b" direction="recipient"> <state>terminated</state> </dialog> </dialog-info>
In above case the 201 device was Registered but its state is set as terminated. Same signal goes for offline users as well. Is this a standard reply or something is missing ?
Thanks for your time Phil.
Regards, Sammy
On Tue, Mar 7, 2017 at 1:54 PM, Phil Lavin <phil.lavin@cloudcall.commailto:phil.lavin@cloudcall.com> wrote: Looks fairly sane. Try setting “pua” db_mode to 0. db_mode 2 takes a very different path through the code of the pua module and we have found it to be somewhat broken beyond repair. Our config is as follows. You may not have some of the stuff highlighted in yellow as I recently added those features to Kamailio. Depends which version you’re running. They’re not necessary for normal operation, however.
modparam("presence", "db_url", DBURL) modparam("presence", "db_update_period", 20) modparam("presence", "clean_period", 60) modparam("presence", "local_log_facility", "LOG_LOCAL3") modparam("presence", "max_expires", 14430)
modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 1)
modparam("pua", "db_url", DBURL) modparam("pua", "db_mode", 0) # Memory only. Required due to the "multiple states for a single dialog" bug modparam("pua", "update_period", 20) modparam("pua", "outbound_proxy", MY_SIP_URL)
modparam("pua_dialoginfo", "send_publish_flag", FLT_DLGINFO) modparam("pua_dialoginfo", "override_lifetime", 14420) modparam("pua_dialoginfo", "callee_trying", 1) modparam("pua_dialoginfo", "disable_caller_publish_flag", FLT_DISABLE_CALLER_PUBLISH) modparam("pua_dialoginfo", "disable_callee_publish_flag", FLT_DISABLE_CALLEE_PUBLISH)
From: sr-users [mailto:sr-users-bounces@lists.sip-router.orgmailto:sr-users-bounces@lists.sip-router.org] On Behalf Of SamyGo Sent: 06 March 2017 22:51 To: Kamailio (SER) - Users Mailing List <sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org>
Subject: Re: [SR-Users] Kamailio Presence help required.
Phil, here are all the Presence related modules and their params.
Igor, I go clearly understand that difference and I accept it. However, Im finding it difficult to digest that FreeSWITCH sends back initial NOTIFY and phone light works while Kamailio is unable to do the same.
#!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "presence_dialoginfo.so" loadmodule "presence_reginfo.so" loadmodule "pua.so" loadmodule "pua_dialoginfo.so" loadmodule "pua_reginfo.so" loadmodule "pua_usrloc.so" #!endif
#!ifdef WITH_PRESENCE # ----- presence params ----- modparam("presence", "db_url", DBURL) modparam("presence", "server_address", "sip:ServerIP:5060" ) modparam("presence", "send_fast_notify", 0) modparam("presence", "db_update_period", 20) modparam("presence", "clean_period", 40) modparam("presence", "subs_db_mode", 2) modparam("presence", "fetch_rows", 1000)
# ----- presence_xml params ----- modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 1) modparam("presence_xml", "force_dummy_presence", 1)
# ----- presence_dialoginfo params ----- modparam("presence_dialoginfo", "force_single_dialog", 1) modparam("presence_dialoginfo", "force_dummy_dialog", 0)
# ----- pua params ----- modparam("pua", "db_url", DBURL) modparam("pua", "db_mode", 2) modparam("pua", "update_period", 60) modparam("pua", "dlginfo_increase_version", 0) modparam("pua", "reginfo_increase_version", 0) modparam("pua", "check_remote_contact", 1) modparam("pua", "fetch_rows", 1000)
# ----- pua_dialoginfo params ----- modparam("pua_dialoginfo", "include_callid", 1) modparam("pua_dialoginfo", "send_publish_flag", FLT_DLGINFO) modparam("pua_dialoginfo", "caller_confirmed", 0) modparam("pua_dialoginfo", "include_tags", 1) modparam("pua_dialoginfo", "override_lifetime", 124)
modparam("pua_reginfo|pua_usrloc", "default_domain", "voipguy.cahttp://voipguy.ca") modparam("pua_reginfo", "server_address", "sip:REGINFO@ServerIP") modparam("pua_usrloc", "branch_flag", FLT_DLGINFO)
#!endif
Thanks for helping me out on this.
Regards, Sammy
On Mon, Mar 6, 2017 at 4:31 PM, Igor Olhovskiy <igorolhovskiy@gmail.commailto:igorolhovskiy@gmail.com> wrote: Hi, Samy.
Point, there is 2 modes of presence. Based on 'presence' and 'dialog'. Only 'presence' indicates states like online/offline, 'dialog' indicates only different call states, but also hold more info about a call. In 'dialog' case XML does not even has an option to indicate, that phone is online or offline.
Refer to https://tools.ietf.org/html/rfc3856 and https://tools.ietf.org/html/rfc4235 So, when phone subscribes to 'dialog', according to rfc, they just want to know active states and not care about online/offline.
Regards, Igor
6 марта 2017 г., 18:00 +0200, Phil Lavin <phil.lavin@cloudcall.commailto:phil.lavin@cloudcall.com>, писал:
You should get an initial NOTIFY when you subscribe. Can you share the parts of your config that are relevant to presence/pua/etc.?
From: sr-users [mailto:sr-users-bounces@lists.sip-router.orgmailto:sr-users-bounces@lists.sip-router.org] On Behalf Of SamyGo Sent: 06 March 2017 15:50 To: Daniel-Constantin Mierla <miconda@gmail.commailto:miconda@gmail.com>; Kamailio (SER) - Users Mailing List <sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org> Subject: Re: [SR-Users] Kamailio Presence help required.
Thanks Daniel for replying, Yes the BLF/Callstates are working fine. Problem arise when a phone reboots and initially has no Lights indication.
These are the traces from a Working old-box(not-kamailio) - Kindly guide why my Kamailio is unable to send the "immediate NOTIFY" regarding the current state of the subscribed extension. If it can do that then I don't need to write anything.
SUBSCRIBE sip:314@presence.voipguy.camailto:sip%3A314@presence.voipguy.ca SIP/2.0. Via: SIP/2.0/UDP 10.0.2.95:5060;branch=z9hG4bK-5ef31b0b. From: "299" <sip:299@presence.voipguy.camailto:sip%3A299@presence.voipguy.ca>;tag=40ab701f5717f5e9. To: <sip:314@presence.voipguy.camailto:sip%3A314@presence.voipguy.ca>. Call-ID: 7f166cd7-a89e6091@10.0.2.95mailto:7f166cd7-a89e6091@10.0.2.95. CSeq: 7888 SUBSCRIBE. Max-Forwards: 70. Contact: "299" <sip:299@10.0.2.95:5060http://sip:299@10.0.2.95:5060>. Accept: application/dialog-info+xml. Accept: application/x-broadworks-hoteling+xml. Expires: 1800. Event: dialog. User-Agent: Cisco/SPA504G-7.5.6. Content-Length: 0. .
Server_IP:5060 -> Client_IP:1042
SIP/2.0 202 Accepted. v:SIP/2.0/UDP 10.0.2.95:5060;branch=z9hG4bK-5ef31b0b;received=Server_IP;rport=1042. f:"299"<sip:299@presence.voipguy.camailto:sip%3A299@presence.voipguy.ca>;tag=40ab701f5717f5e9. t:<sip:314@presence.voipguy.camailto:sip%3A314@presence.voipguy.ca>;tag=jYj0rSoBG7KA. i:7f166cd7-a89e6091@10.0.2.95mailto:i%3A7f166cd7-a89e6091@10.0.2.95. CSeq:7888 SUBSCRIBE. m:sip:314@Client_IP:5060. Expires:1800. User-Agent:HV. Allow:INVITE,ACK,BYE,CANCEL,OPTIONS,MESSAGE,INFO,UPDATE,REGISTER,REFER,NOTIFY,PUBLISH,SUBSCRIBE. k:timer,path,replaces. u:talk,hold,conference,presence,as-feature-event,dialog,line-seize,call-info,sla,include-session-description,presence.winfo,message-summary,refer. Subscription-State:active;expires=1800. l:0. .
Server_IP:5060 -> Client_IP:1042
NOTIFY sip:299@10.0.2.95:5060http://sip:299@10.0.2.95:5060 SIP/2.0. v:SIP/2.0/UDP Client_IP;rport;branch=z9hG4bKUQ5v41FcK0Bvm. Route:sip:Server_IP:1042;transport=udp. Max-Forwards:70. f:<sip:314@presence.voipguy.camailto:sip%3A314@presence.voipguy.ca>;tag=jYj0rSoBG7KA. t:"299"<sip:299@presence.voipguy.camailto:sip%3A299@presence.voipguy.ca>;tag=40ab701f5717f5e9. i:7f166cd7-a89e6091@10.0.2.95mailto:i%3A7f166cd7-a89e6091@10.0.2.95. CSeq:261575252tel:261575252 NOTIFY. m:sip:314@Client_IP:5060. User-Agent:HV. Allow:INVITE,ACK,BYE,CANCEL,OPTIONS,MESSAGE,INFO,UPDATE,REGISTER,REFER,NOTIFY,PUBLISH,SUBSCRIBE. k:timer,path,replaces. o:dialog. u:talk,hold,conference,presence,as-feature-event,dialog,line-seize,call-info,sla,include-session-description,presence.winfo,message-summary,refer. Subscription-State:active;expires=1800. c:application/dialog-info+xml. l:166. . <?xml version="1.0"?> <dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="0" state="full" entity="sip:314@presence.voipguy.ca<mailto:sip%3A314@presence.voipguy.ca>"> </dialog-info>
Client_IP:1042 -> Server_IP:5060
SIP/2.0 200 OK. t:"299"<sip:299@presence.voipguy.camailto:sip%3A299@presence.voipguy.ca>;tag=40ab701f5717f5e9. f:<sip:314@presence.voipguy.camailto:sip%3A314@presence.voipguy.ca>;tag=jYj0rSoBG7KA. i:7f166cd7-a89e6091@10.0.2.95mailto:i%3A7f166cd7-a89e6091@10.0.2.95. CSeq:261575252tel:261575252 NOTIFY. v:SIP/2.0/UDP Client_IP;branch=z9hG4bKUQ5v41FcK0Bvm. Server: Cisco/SPA504G-7.5.6. Content-Length: 0. .
Regards, Sammy
On Mon, Mar 6, 2017 at 2:22 AM, Daniel-Constantin Mierla <miconda@gmail.commailto:miconda@gmail.com> wrote:
Hello,
from your description, I don't see a problem from the specs point of view, but more like something that you would like to have.
If UA subscribers only for dialog event, then it gets NOTIFY requests only for dialog states (new call, ..., termintated call). When it subscribers for presence, then it gets UA availability states.
And I think this is what you also get based on description. Am I wright?
Mixing the states of presence for dialog notifications is not possible, not in the specs, but eventually you can write a module yourself and map as you want/need presence states over dialog states.
Cheers, Daniel On 03/03/2017 19:13, SamyGo wrote: Hi, I'm in need of making/tweak an existing Kamailio Presence setup which is giving some tough time. Whats already working: BLF dialog states changes are already sent across the users. SCA is working as well.
What isn't working: When a User comes online then it sends SUBSCRIBE with Event: dialog and don't get notified of its subscribers state right then unless the monitored extensions make a call (BLF works) Why is it not working: As evident from wireshark traces, the user IP phones (Test sets: Polycoms, Yealink, CISCO, Grandstream) don't send our Event: presence rather only Event:dialog and Kamailio do not send NOTIFY out to everyone. Though yes there is an internally generated PUBLISH seen and handled properly upon registration state changes.
Jitsi has been tested and Kamailio send out these registration state change info to jitsi, somce jitsi sends Event:presence in SUBSCRIBE.
I need dialog based NOTIFY to be sent out on registration state-change.
Need pointers and help on the topic, looking forward to some feedback.
Regards, Sammy
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
www.twitter.com/micondahttp://www.twitter.com/miconda -- www.linkedin.com/in/micondahttp://www.linkedin.com/in/miconda
Kamailio Advanced Training - Mar 6-8 (Europe) and Mar 20-22 (USA) - www.asipto.comhttp://www.asipto.com
Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.comhttp://www.kamailioworld.com
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.orgmailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-
Daniel-Constantin Mierla -
Igor Olhovskiy -
Phil Lavin -
SamyGo