Hello I'm using a Patton gateway with my Openser and everything works fine, except when OpenSER has to redirect a call to Asterisk. If I use X-Lite, OpenSER can redirect the call to Asterisk, but with the Patton gateway it doesnt work.
In the moment Im just using rewritehost(".....");
The problem could be in the Patton gateway configuration, but I just want to be sure... does OpenSER needs some special configuration in order to the redirects to work?
Thanks Joao Pereira
Hi Joao,
It's not clear want you want to do, you need OpenSER handling 3xx messages coming from asterisk or the patton gw? If yes look the "uac_redirect" module.
:tele
On Fri, 2007-06-08 at 10:46 +0100, Joao Pereira wrote:
Hello I'm using a Patton gateway with my Openser and everything works fine, except when OpenSER has to redirect a call to Asterisk. If I use X-Lite, OpenSER can redirect the call to Asterisk, but with the Patton gateway it doesnt work.
In the moment Im just using rewritehost(".....");
The problem could be in the Patton gateway configuration, but I just want to be sure... does OpenSER needs some special configuration in order to the redirects to work?
Thanks Joao Pereira
Hello My question is: Does OpenSER needs some special configuration to redirect calls? Im just using "rewritehost" and it works with X-Lite without problems. The problem just appeared with the Patton Gateway.... I just need to know in which situations do I need to configure OpenSER with "uac_redirect" module.
Thanks regards Joao Pereira
tele wrote:
Hi Joao,
It's not clear want you want to do, you need OpenSER handling 3xx messages coming from asterisk or the patton gw? If yes look the "uac_redirect" module.
:tele
On Fri, 2007-06-08 at 10:46 +0100, Joao Pereira wrote:
Hello I'm using a Patton gateway with my Openser and everything works fine, except when OpenSER has to redirect a call to Asterisk. If I use X-Lite, OpenSER can redirect the call to Asterisk, but with the Patton gateway it doesnt work.
In the moment Im just using rewritehost(".....");
The problem could be in the Patton gateway configuration, but I just want to be sure... does OpenSER needs some special configuration in order to the redirects to work?
Thanks Joao Pereira
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hi,
You use rewritehost() for route call to specific IP or host so it's correct, the uac_redirect is a module able to handler 3xx Redirect messages from other gw, you can also generate 3xx messages from OpenSER. depends on your requirements.
What problem happens with the Patton GW ?
:tele
On Mon, 2007-06-11 at 14:43 +0100, Joao Pereira wrote:
Hello My question is: Does OpenSER needs some special configuration to redirect calls? Im just using "rewritehost" and it works with X-Lite without problems. The problem just appeared with the Patton Gateway.... I just need to know in which situations do I need to configure OpenSER with "uac_redirect" module.
Thanks regards Joao Pereira
tele wrote:
Hi Joao,
It's not clear want you want to do, you need OpenSER handling 3xx messages coming from asterisk or the patton gw? If yes look the "uac_redirect" module.
:tele
On Fri, 2007-06-08 at 10:46 +0100, Joao Pereira wrote:
Hello I'm using a Patton gateway with my Openser and everything works fine, except when OpenSER has to redirect a call to Asterisk. If I use X-Lite, OpenSER can redirect the call to Asterisk, but with the Patton gateway it doesnt work.
In the moment Im just using rewritehost(".....");
The problem could be in the Patton gateway configuration, but I just want to be sure... does OpenSER needs some special configuration in order to the redirects to work?
Thanks Joao Pereira
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Im not using uac_redirect. Im just using rewritehost(..) to forward the calls to an Asterisk gateway (and then to FWD echotest). With X-Lite (and Cisco phones and SNOM phones) it works. But it doesnt work with the Patton gateway.
Here is some debug in OpenSER:
ppp.ppp.ppp.ppp - Patton gateways IP (public) xxx.xxx.xxx.xxx - OpenSER IP (public) test.startel.pt - OpenSER domain 69.90.155.70 - FWD IP
Its a call to 351210329169 that is translated (with ENUM) to 613@fwd.pulver.com (echo test)
U 2007/06/12 00:36:25.367038 ppp.ppp.ppp.ppp:5060 -> xxx.xxx.xxx.xxx:5060 INVITE sip:351210329169@test.startel.pt SIP/2.0..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..Max-Forwards : 70..Content-Length: 222..To: sip:351210329169@test.startel.pt..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03 ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866 INVITE..Route: sip:test.startel.pt:5060;lr..Supported: timer. .Remote-Party-ID: sip:114@test.startel.pt;party=calling;screen=no;privacy=off..Remote-Party-ID: <sip:351210329169@test.startel.pt
;party=called..Content-Type: application/sdp..Contact:
sip:114@ppp.ppp.ppp.ppp:5060..Supported: replaces..User-Agen t: Patton SN4634 3BIS UI MxSF v3.2.8.45 00A0BA02689C....v=0..o=MxSIP 0 5 IN IP4 ppp.ppp.ppp.ppp..s=SIP Call..c=IN IP4 pp p.ppp.ppp.ppp..t=0 0..m=audio 4872 RTP/AVP 0 8 101..a=rtpmap:0 PCMU/8000..a=rtpmap:8 PCMA/8000..a=rtpmap:101 telephone-e vent/8000..a=fmtp:101 0-15..a=sendrecv..
# U 2007/06/12 00:36:25.561665 xxx.xxx.xxx.xxx:5060 -> ppp.ppp.ppp.ppp:5060 SIP/2.0 100 Giving a try..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..To: sip:351210329169@test.startel.p t..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 12952786 6 INVITE..Server: OpenSER (1.2.1-tls (i386/linux))..Content-Length: 0.... # U 2007/06/12 00:36:26.018415 xxx.xxx.xxx.xxx:5060 -> 69.90.155.70:5060 INVITE sip:613@fwd.pulver.com SIP/2.0..Record-Route: sip:xxx.xxx.xxx.xxx;lr=on;ftag=717e535f36541f2..Via: SIP/2.0/UDP xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..Max-Forward s: 69..Content-Length: 222..To: sip:351210329169@test.startel.pt..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 0 3ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866 INVITE..Supported: timer..Remote-Party-ID: <sip:114@test.st artel.pt>;party=calling;screen=no;privacy=off..Remote-Party-ID: sip:351210329169@test.startel.pt;party=called..Content-Type: application/sdp..Contact: sip:114@ppp.ppp.ppp.ppp:5060..Supported: replaces..User-Agent: Patton SN4634 3BIS UI MxSF v3. 2.8.45 00A0BA02689C....v=0..o=MxSIP 0 5 IN IP4 ppp.ppp.ppp.ppp..s=SIP Call..c=IN IP4 ppp.ppp.ppp.ppp..t=0 0..m=audio 4872 RTP/AVP 0 8 101..a=rtpmap:0 PCMU/8000..a=rtpmap:8 PCMA/8000..a=rtpmap:101 telephone-event/8000..a=fmtp:101 0-15..a=sen
drecv..
# U 2007/06/12 00:36:26.115398 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060 SIP/2.0 100 Trying..Via: SIP/2.0/UDP xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060 ;branch=z9hG4bK962101c13..To: sip:351210329169@test.startel.pt..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03a c0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866 INVITE..Content-Length: 0.... # U 2007/06/12 00:36:26.115784 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060 SIP/2.0 100 trying -- your call is important to us..Via: SIP/2.0/UDP xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..To: sip:351210329169@test.startel.pt..From: sip:114@test.startel.pt;t ag=717e535f36541f2..Call-ID: 03ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866 INVITE..Content-Length: 0...
.
# U 2007/06/12 00:36:26.118035 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060 SIP/2.0 180 Ringing..Via: SIP/2.0/UDP xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:506 0;branch=z9hG4bK962101c13..From: sip:114@test.startel.pt;tag=717e535f36541f2..To: sip:351210329169@test.startel.pt;tag=as51ccad c7..Call-ID: 03ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866 INVITE..User-Agent: Asterisk PBX..Allow: INV ITE, ACK, CANCEL, OPTIONS, BYE, REFER..Contact: sip:613@69.90.168.13:5028..Content-Length: 0.... # U 2007/06/12 00:36:26.118382 xxx.xxx.xxx.xxx:5060 -> ppp.ppp.ppp.ppp:5060 SIP/2.0 180 Ringing..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..From: sip:114@test.startel.pt;tag=717e53 5f36541f2..To: sip:351210329169@test.startel.pt;tag=as51ccadc7..Call-ID: 03ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq : 129527866 INVITE..User-Agent: Asterisk PBX..Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER..Contact: <sip:613@69.90. 168.13:5028>..Content-Length: 0....
# U 2007/06/12 00:36:29.367666 ppp.ppp.ppp.ppp:5060 -> xxx.xxx.xxx.xxx:5060 CANCEL sip:351210329169@test.startel.pt SIP/2.0..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..Max-Forwards : 70..Content-Length: 0..To: sip:351210329169@test.startel.pt..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03ac 0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866 CANCEL..Route: sip:test.startel.pt:5060;lr..Supported: timer..S upported: replaces..User-Agent: Patton SN4634 3BIS UI MxSF v3.2.8.45 00A0BA02689C.... # U 2007/06/12 00:36:29.368573 xxx.xxx.xxx.xxx:5060 -> 69.90.155.70:5060 CANCEL sip:613@fwd.pulver.com SIP/2.0..Record-Route: sip:xxx.xxx.xxx.xxx;lr=on;ftag=717e535f36541f2..Via: SIP/2.0/UDP xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..Max-Forward s: 69..Content-Length: 0..To: sip:351210329169@test.startel.pt..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03a c0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866 CANCEL..Supported: timer..Supported: replaces..User-Agent: P atton SN4634 3BIS UI MxSF v3.2.8.45 00A0BA02689C....
# U 2007/06/12 00:36:29.369009 xxx.xxx.xxx.xxx:5060 -> ppp.ppp.ppp.ppp:5060 SIP/2.0 200 canceling..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..To: sip:351210329169@test.startel.pt;t ag=eeea4be47e7c0c3a22d00fc0f271945c-878f..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03ac0b65b0cced8f6d5bf fccf1ce5761@test.startel.pt..CSeq: 129527866 CANCEL..Server: OpenSER (1.2.1-tls (i386/linux))..Content-Length: 0.... # U 2007/06/12 00:36:29.465000 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060 SIP/2.0 100 Trying..Via: SIP/2.0/UDP xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060 ;branch=z9hG4bK962101c13..To: sip:351210329169@test.startel.pt..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03a c0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866 CANCEL..Content-Length: 0.... # U 2007/06/12 00:36:29.465433 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060 SIP/2.0 200 canceling..Record-Route: sip:xxx.xxx.xxx.xxx;lr=on;ftag=717e535f36541f2..Via: SIP/2.0/UDP xxx.xxx.xxx.xxx;b ranch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..To: sip:351210329169@startel .pt;tag=43d6c08305a5580073ddc395327059a9-73f0..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03ac0b65b0cced 8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866 CANCEL..Content-Length: 0....
Sorry for the long post Thanks a lot for the help Joao Pereira
tele wrote:
Hi,
You use rewritehost() for route call to specific IP or host so it's correct, the uac_redirect is a module able to handler 3xx Redirect messages from other gw, you can also generate 3xx messages from OpenSER. depends on your requirements.
What problem happens with the Patton GW ?
:tele
On Mon, 2007-06-11 at 14:43 +0100, Joao Pereira wrote:
Hello My question is: Does OpenSER needs some special configuration to redirect calls? Im just using "rewritehost" and it works with X-Lite without problems. The problem just appeared with the Patton Gateway.... I just need to know in which situations do I need to configure OpenSER with "uac_redirect" module.
Thanks regards Joao Pereira
tele wrote:
Hi Joao,
It's not clear want you want to do, you need OpenSER handling 3xx messages coming from asterisk or the patton gw? If yes look the "uac_redirect" module.
:tele
On Fri, 2007-06-08 at 10:46 +0100, Joao Pereira wrote:
Hello I'm using a Patton gateway with my Openser and everything works fine, except when OpenSER has to redirect a call to Asterisk. If I use X-Lite, OpenSER can redirect the call to Asterisk, but with the Patton gateway it doesnt work.
In the moment Im just using rewritehost(".....");
The problem could be in the Patton gateway configuration, but I just want to be sure... does OpenSER needs some special configuration in order to the redirects to work?
Thanks Joao Pereira
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Ok now it's more clear, when patton recive the 180 Ringing it send without reason a CANCEL request.
Joao you can try troubleshoot the issue activating some debug in the patton gw:
debug gateway sip transport detail 5 debug gateway sip signaling detail 5 debug gateway sip error detail 5 debug call-control detail 5 debug call-router detail 5
try to understand looking debug why after the patton recive the 180 ringing it sends a CANCEL for the call. if you want, you can send to me the trace.
:tele
On Tue, 2007-06-12 at 12:27 +0100, Joao Pereira wrote:
Im not using uac_redirect. Im just using rewritehost(..) to forward the calls to an Asterisk gateway (and then to FWD echotest). With X-Lite (and Cisco phones and SNOM phones) it works. But it doesnt work with the Patton gateway.
Here is some debug in OpenSER:
ppp.ppp.ppp.ppp - Patton gateways IP (public) xxx.xxx.xxx.xxx - OpenSER IP (public) test.startel.pt - OpenSER domain 69.90.155.70 - FWD IP
Its a call to 351210329169 that is translated (with ENUM) to 613@fwd.pulver.com (echo test)
U 2007/06/12 00:36:25.367038 ppp.ppp.ppp.ppp:5060 -> xxx.xxx.xxx.xxx:5060 INVITE sip:351210329169@test.startel.pt SIP/2.0..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..Max-Forwards : 70..Content-Length: 222..To: sip:351210329169@test.startel.pt..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03 ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866 INVITE..Route: sip:test.startel.pt:5060;lr..Supported: timer. .Remote-Party-ID: sip:114@test.startel.pt;party=calling;screen=no;privacy=off..Remote-Party-ID: <sip:351210329169@test.startel.pt
;party=called..Content-Type: application/sdp..Contact:
sip:114@ppp.ppp.ppp.ppp:5060..Supported: replaces..User-Agen t: Patton SN4634 3BIS UI MxSF v3.2.8.45 00A0BA02689C....v=0..o=MxSIP 0 5 IN IP4 ppp.ppp.ppp.ppp..s=SIP Call..c=IN IP4 pp p.ppp.ppp.ppp..t=0 0..m=audio 4872 RTP/AVP 0 8 101..a=rtpmap:0 PCMU/8000..a=rtpmap:8 PCMA/8000..a=rtpmap:101 telephone-e vent/8000..a=fmtp:101 0-15..a=sendrecv..
# U 2007/06/12 00:36:25.561665 xxx.xxx.xxx.xxx:5060 -> ppp.ppp.ppp.ppp:5060 SIP/2.0 100 Giving a try..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..To: sip:351210329169@test.startel.p t..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 12952786 6 INVITE..Server: OpenSER (1.2.1-tls (i386/linux))..Content-Length: 0.... # U 2007/06/12 00:36:26.018415 xxx.xxx.xxx.xxx:5060 -> 69.90.155.70:5060 INVITE sip:613@fwd.pulver.com SIP/2.0..Record-Route: sip:xxx.xxx.xxx.xxx;lr=on;ftag=717e535f36541f2..Via: SIP/2.0/UDP xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..Max-Forward s: 69..Content-Length: 222..To: sip:351210329169@test.startel.pt..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 0 3ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866 INVITE..Supported: timer..Remote-Party-ID: <sip:114@test.st artel.pt>;party=calling;screen=no;privacy=off..Remote-Party-ID: sip:351210329169@test.startel.pt;party=called..Content-Type: application/sdp..Contact: sip:114@ppp.ppp.ppp.ppp:5060..Supported: replaces..User-Agent: Patton SN4634 3BIS UI MxSF v3. 2.8.45 00A0BA02689C....v=0..o=MxSIP 0 5 IN IP4 ppp.ppp.ppp.ppp..s=SIP Call..c=IN IP4 ppp.ppp.ppp.ppp..t=0 0..m=audio 4872 RTP/AVP 0 8 101..a=rtpmap:0 PCMU/8000..a=rtpmap:8 PCMA/8000..a=rtpmap:101 telephone-event/8000..a=fmtp:101 0-15..a=sen
drecv..
# U 2007/06/12 00:36:26.115398 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060 SIP/2.0 100 Trying..Via: SIP/2.0/UDP xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060 ;branch=z9hG4bK962101c13..To: sip:351210329169@test.startel.pt..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03a c0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866 INVITE..Content-Length: 0.... # U 2007/06/12 00:36:26.115784 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060 SIP/2.0 100 trying -- your call is important to us..Via: SIP/2.0/UDP xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..To: sip:351210329169@test.startel.pt..From: sip:114@test.startel.pt;t ag=717e535f36541f2..Call-ID: 03ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866 INVITE..Content-Length: 0...
.
# U 2007/06/12 00:36:26.118035 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060 SIP/2.0 180 Ringing..Via: SIP/2.0/UDP xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:506 0;branch=z9hG4bK962101c13..From: sip:114@test.startel.pt;tag=717e535f36541f2..To: sip:351210329169@test.startel.pt;tag=as51ccad c7..Call-ID: 03ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866 INVITE..User-Agent: Asterisk PBX..Allow: INV ITE, ACK, CANCEL, OPTIONS, BYE, REFER..Contact: sip:613@69.90.168.13:5028..Content-Length: 0.... # U 2007/06/12 00:36:26.118382 xxx.xxx.xxx.xxx:5060 -> ppp.ppp.ppp.ppp:5060 SIP/2.0 180 Ringing..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..From: sip:114@test.startel.pt;tag=717e53 5f36541f2..To: sip:351210329169@test.startel.pt;tag=as51ccadc7..Call-ID: 03ac0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq : 129527866 INVITE..User-Agent: Asterisk PBX..Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER..Contact: <sip:613@69.90. 168.13:5028>..Content-Length: 0....
# U 2007/06/12 00:36:29.367666 ppp.ppp.ppp.ppp:5060 -> xxx.xxx.xxx.xxx:5060 CANCEL sip:351210329169@test.startel.pt SIP/2.0..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..Max-Forwards : 70..Content-Length: 0..To: sip:351210329169@test.startel.pt..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03ac 0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866 CANCEL..Route: sip:test.startel.pt:5060;lr..Supported: timer..S upported: replaces..User-Agent: Patton SN4634 3BIS UI MxSF v3.2.8.45 00A0BA02689C.... # U 2007/06/12 00:36:29.368573 xxx.xxx.xxx.xxx:5060 -> 69.90.155.70:5060 CANCEL sip:613@fwd.pulver.com SIP/2.0..Record-Route: sip:xxx.xxx.xxx.xxx;lr=on;ftag=717e535f36541f2..Via: SIP/2.0/UDP xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..Max-Forward s: 69..Content-Length: 0..To: sip:351210329169@test.startel.pt..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03a c0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866 CANCEL..Supported: timer..Supported: replaces..User-Agent: P atton SN4634 3BIS UI MxSF v3.2.8.45 00A0BA02689C....
# U 2007/06/12 00:36:29.369009 xxx.xxx.xxx.xxx:5060 -> ppp.ppp.ppp.ppp:5060 SIP/2.0 200 canceling..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..To: sip:351210329169@test.startel.pt;t ag=eeea4be47e7c0c3a22d00fc0f271945c-878f..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03ac0b65b0cced8f6d5bf fccf1ce5761@test.startel.pt..CSeq: 129527866 CANCEL..Server: OpenSER (1.2.1-tls (i386/linux))..Content-Length: 0.... # U 2007/06/12 00:36:29.465000 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060 SIP/2.0 100 Trying..Via: SIP/2.0/UDP xxx.xxx.xxx.xxx;branch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060 ;branch=z9hG4bK962101c13..To: sip:351210329169@test.startel.pt..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03a c0b65b0cced8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866 CANCEL..Content-Length: 0.... # U 2007/06/12 00:36:29.465433 69.90.155.70:5060 -> xxx.xxx.xxx.xxx:5060 SIP/2.0 200 canceling..Record-Route: sip:xxx.xxx.xxx.xxx;lr=on;ftag=717e535f36541f2..Via: SIP/2.0/UDP xxx.xxx.xxx.xxx;b ranch=z9hG4bK6ebf.f15d8c06.0..Via: SIP/2.0/UDP ppp.ppp.ppp.ppp:5060;branch=z9hG4bK962101c13..To: sip:351210329169@startel .pt;tag=43d6c08305a5580073ddc395327059a9-73f0..From: sip:114@test.startel.pt;tag=717e535f36541f2..Call-ID: 03ac0b65b0cced 8f6d5bffccf1ce5761@test.startel.pt..CSeq: 129527866 CANCEL..Content-Length: 0....
Sorry for the long post Thanks a lot for the help Joao Pereira
tele wrote:
Hi,
You use rewritehost() for route call to specific IP or host so it's correct, the uac_redirect is a module able to handler 3xx Redirect messages from other gw, you can also generate 3xx messages from OpenSER. depends on your requirements.
What problem happens with the Patton GW ?
:tele
On Mon, 2007-06-11 at 14:43 +0100, Joao Pereira wrote:
Hello My question is: Does OpenSER needs some special configuration to redirect calls? Im just using "rewritehost" and it works with X-Lite without problems. The problem just appeared with the Patton Gateway.... I just need to know in which situations do I need to configure OpenSER with "uac_redirect" module.
Thanks regards Joao Pereira
tele wrote:
Hi Joao,
It's not clear want you want to do, you need OpenSER handling 3xx messages coming from asterisk or the patton gw? If yes look the "uac_redirect" module.
:tele
On Fri, 2007-06-08 at 10:46 +0100, Joao Pereira wrote:
Hello I'm using a Patton gateway with my Openser and everything works fine, except when OpenSER has to redirect a call to Asterisk. If I use X-Lite, OpenSER can redirect the call to Asterisk, but with the Patton gateway it doesnt work.
In the moment Im just using rewritehost(".....");
The problem could be in the Patton gateway configuration, but I just want to be sure... does OpenSER needs some special configuration in order to the redirects to work?
Thanks Joao Pereira
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-
Joao Pereira -
tele