Alternately, if you dislike any of these paradigms or find the order of operations inconvenient, just roll your own. That's what sqlops is for.
-- This message was painstakingly thumbed out on my mobile, so apologies for brevity, errors, and general sloppiness.
Alex Balashov - Principal Evariste Systems LLC 260 Peachtree Street NW Suite 2200 Atlanta, GA 30303 Tel: +1-678-954-0670 Fax: +1-404-961-1892 Web: http://www.evaristesys.com/
On Oct 1, 2011, at 10:43 AM, "graham@g-rock.net" graham@g-rock.net wrote:
I know I am Auth'ing users, but apparently need to confirm the location of www_authorize. Thanks for the pointers Alex.
Sent from my HTC on the Now Network from Sprint!
----- Reply message ----- From: "Alex Balashov" abalashov@evaristesys.com Date: Sat, Oct 1, 2011 9:07 am Subject: [SR-Users] Setting avp from load_credentials To: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -Users Mailing List" sr-users@lists.sip-router.org
Sure it is, but credentials only get loaded if you are doing proxy/www_authorize() beforehand. Are you?
-- This message was painstakingly thumbed out on my mobile, so apologies for brevity, errors, and general sloppiness.
Alex Balashov - Principal Evariste Systems LLC 260 Peachtree Street NW Suite 2200 Atlanta, GA 30303 Tel: +1-678-954-0670 Fax: +1-404-961-1892 Web: http://www.evaristesys.com/
On Oct 1, 2011, at 9:24 AM, Graham Wooden graham@g-rock.net wrote:
Hi there,
Just doing a quick test and this doesn’t appear to be working. Kamailio 1.5.5-notls. Snippet of code:
modparam("auth_db", "load_credentials", "username") . . . xlog("username is $avp(s:username)\n");
The result is '<null>'. Is this not available in the route{} ?
Thanks,
-graham
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
I believe I have got it going down the right path now ... I have a few users that don¹t auth, as I have them listed as static entries in the location table as well as in the trusted table. I was testing with one of those PBX¹s that don¹t auth, so it was throwing me off. Since its just a few hardcoded trusted, I am doing an if/else on $si and assigning $var(blah) that way, and everyone else has $aU assigned to $var(blah).
ThIs all ties into my previous thread form which I am using $var(blah) on my get_profile_size for my quota/call-limit checks for my outbound call tracking. $rU works across the board for the inbound.
I am now back to determine what is the best way to store the call-limit values ... In the subscriber table as a new column or in the quota table that I was using before.
Thank you again Alex for all the pointers; indeed the dialog module is the best way to handle this.
-graham
On 10/1/11 1:45 PM, "Alex Balashov" abalashov@evaristesys.com wrote:
Alternately, if you dislike any of these paradigms or find the order of operations inconvenient, just roll your own. That's what sqlops is for.
-- This message was painstakingly thumbed out on my mobile, so apologies for brevity, errors, and general sloppiness.
Alex Balashov - Principal Evariste Systems LLC 260 Peachtree Street NW Suite 2200 Atlanta, GA 30303 Tel: +1-678-954-0670 Fax: +1-404-961-1892 Web: http://www.evaristesys.com/ http://www.evaristesys.com/
On Oct 1, 2011, at 10:43 AM, "graham@g-rock.net" graham@g-rock.net wrote:
I know I am Auth'ing users, but apparently need to confirm the location of www_authorize. Thanks for the pointers Alex.
Sent from my HTC on the Now Network from Sprint!
----- Reply message ----- From: "Alex Balashov" abalashov@evaristesys.com Date: Sat, Oct 1, 2011 9:07 am Subject: [SR-Users] Setting avp from load_credentials To: "SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) -Users Mailing List" sr-users@lists.sip-router.org
Sure it is, but credentials only get loaded if you are doing proxy/www_authorize() beforehand. Are you?
-- This message was painstakingly thumbed out on my mobile, so apologies for brevity, errors, and general sloppiness.
Alex Balashov - Principal Evariste Systems LLC 260 Peachtree Street NW Suite 2200 Atlanta, GA 30303 Tel: +1-678-954-0670 Fax: +1-404-961-1892 Web: http://www.evaristesys.com http://www.evaristesys.com /
On Oct 1, 2011, at 9:24 AM, Graham Wooden graham@g-rock.net wrote:
Hi there,
Just doing a quick test and this doesn¹t appear to be working. Kamailio 1.5.5-notls. Snippet of code:
modparam("auth_db", "load_credentials", "username") . . . xlog("username is $avp(s:username)\n");
The result is '<null>'. Is this not available in the route{} ?
Thanks,
-graham
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org mailto:sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-
Alex Balashov -
Graham Wooden