Hi to all!
I'm a new seruser, and I have a problem with SER and a PSTN gw what I can't solve. I have got 2 UAs, 1 SER server, 1 Cisco PSTN gw (by the side of the voip provider). All of them have public IP.
Phone1 -------+ | SER --- PSTN gw | Phone2 -------+
When I call from Phone1 to Phone2 directly, it is working properly. But: If I call from Phone1 to Phone2 via the PSTN gw, then it's ringing out, and when I pick up Phone2 I hear the voice of Phone1, but in Phone1 I can't hear the voice of Phone2. If I call from Phone1 to other telephone numbers, I have the same problem. I would like to proxy the media on the server.
I'm useing SER 0.8.14. ser.cfg attached Thank you very much for your effort, and sorry for my poor English...
Regards, KutiJoe
If your Phone1 or/and Phone2 are behind a NAT you should install SER+MEDIAPROXY or SER+RTPPROXY.
You could check www.onsip.org for reference.
Regards
Alberto Cruz
Kuti Joe wrote:
Hi to all!
I'm a new seruser, and I have a problem with SER and a PSTN gw what I can't solve. I have got 2 UAs, 1 SER server, 1 Cisco PSTN gw (by the side of the voip provider). All of them have public IP.
Phone1 -------+ | SER --- PSTN gw | Phone2 -------+
When I call from Phone1 to Phone2 directly, it is working properly. But: If I call from Phone1 to Phone2 via the PSTN gw, then it's ringing out, and when I pick up Phone2 I hear the voice of Phone1, but in Phone1 I can't hear the voice of Phone2. If I call from Phone1 to other telephone numbers, I have the same problem. I would like to proxy the media on the server.
I'm useing SER 0.8.14. ser.cfg attached Thank you very much for your effort, and sorry for my poor English...
Regards, KutiJoe
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Alberto Cruz -
Kuti Joe