7 Nov
2005
7 Nov
'05
4:43 a.m.
uac module configuration is by default without
modparam, and the problem is when
the callee respond the call, the caller hear ring
sound and callee voice, both
of then, and UAC ( caller) don't do final ACK if
reveive OK from UAS, because
OK trace from UAS may be not correct.
We only use uac_replace_from("","usuario(a)domain.com")
for INVITE,ACK,CANCEL or
BYE method in route section.We have use openser
release 1.0.0
Have you a solution or is it a bug ?
Thank in advance
Jose
__________________________________
Yahoo! FareChase: Search multiple travel sites in one click.
http://farechase.yahoo.com
8 Nov
8 Nov
10:43 a.m.
Hi Jose,
try to use "auto" mode for FROM restoring:
modparam("uac","from_restore_mode","auto")
by doing this, you will need to call uac_replace_from() *only* for the
initial INVITE and CANCEL .. all sequential requests (ACK, BYE,
re-INVITEs) will be automatically updated.
If you still have problems, please post a network trace from the proxy.
regards,
bogdan
jltorre(a)yahoo.com wrote:
uac module configuration is by default without
modparam, and the problem is when
the callee respond the call, the caller hear ring
sound and callee voice, both
of then, and UAC ( caller) don't do final ACK if
reveive OK from UAS, because
OK trace from UAS may be not correct.
We only use uac_replace_from("","usuario(a)domain.com")
for INVITE,ACK,CANCEL or
BYE method in route section.We have use openser
release 1.0.0
Have you a solution or is it a bug ?
Thank in advance
Jose
__________________________________
Yahoo! FareChase: Search multiple travel sites in one click.
http://farechase.yahoo.com
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
11 Nov
11 Nov
2:32 a.m.
Hi Bogdan,
I do that :
- I don't put any modparam, because modmodparam by
default is "auto" and in route block put
uac_replace_from() only for INVITE and CANCEL, and the
problem is the same, UAC don't send ACK because OK
from UAS don't restore "FROM" value. The problem is
iqual than the problem solved with replace_from.patch
in SER 0.9.0 with UAC module. the problem is in ACK
--- OK dialog after "RINGING" dialog.
Do you send me a example on how to configure
uac_replace_from and uac_restore.
Another thing, if i have digest authentication, i have
insert uac_auth() or i can insert traditional method
with proxy_authorize or www_authorize method ?
Thanks in advance
Jose
--- Bogdan-Andrei Iancu <bogdan(a)voice-system.ro>
wrote:
Hi Jose,
try to use "auto" mode for FROM restoring:
modparam("uac","from_restore_mode","auto")
by doing this, you will need to call
uac_replace_from() *only* for the
initial INVITE and CANCEL .. all sequential requests
(ACK, BYE,
re-INVITEs) will be automatically updated.
If you still have problems, please post a network
trace from the proxy.
regards,
bogdan
jltorre(a)yahoo.com wrote:
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
uac module configuration is by default without
modparam, and the problem is when
the callee respond the call, the caller hear ring
sound and callee voice, both
of then, and UAC ( caller) don't do final ACK if
reveive OK from UAS, because
OK trace from UAS may be not correct.
We only use
uac_replace_from("","usuario(a)domain.com")
for INVITE,ACK,CANCEL or
BYE method in route section.We have use openser
release 1.0.0
Have you a solution or is it a bug ?
Thank in advance
Jose
__________________________________
Yahoo! FareChase: Search multiple travel sites in
one click.
http://farechase.yahoo.com
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
2:58 a.m.
Please explicitly set the
modparam("uac","from_restore_mode","auto")
it seams to be a documentation error - actually the default value is
"none". Also please attach network traces.
regards,
bogdan
jltorre(a)yahoo.com wrote:
Hi Bogdan,
I do that :
- I don't put any modparam, because modmodparam by
default is "auto" and in route block put
uac_replace_from() only for INVITE and CANCEL, and the
problem is the same, UAC don't send ACK because OK
from UAS don't restore "FROM" value. The problem is
iqual than the problem solved with replace_from.patch
in SER 0.9.0 with UAC module. the problem is in ACK
--- OK dialog after "RINGING" dialog.
Do you send me a example on how to configure
uac_replace_from and uac_restore.
Another thing, if i have digest authentication, i have
insert uac_auth() or i can insert traditional method
with proxy_authorize or www_authorize method ?
Thanks in advance
Jose
--- Bogdan-Andrei Iancu <bogdan(a)voice-system.ro>
wrote:
Hi Jose,
try to use "auto" mode for FROM restoring:
modparam("uac","from_restore_mode","auto")
by doing this, you will need to call
uac_replace_from() *only* for the
initial INVITE and CANCEL .. all sequential requests
(ACK, BYE,
re-INVITEs) will be automatically updated.
If you still have problems, please post a network
trace from the proxy.
regards,
bogdan
jltorre(a)yahoo.com wrote:
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
uac module configuration is by default without
modparam, and the problem is when
the callee respond the call, the caller hear ring
sound and callee voice, both
of then, and UAC ( caller) don't do final ACK if
reveive OK from UAS, because
OK trace from UAS may be not correct.
We only use
uac_replace_from("","usuario(a)domain.com")
for INVITE,ACK,CANCEL or
BYE method in route section.We have use openser
release 1.0.0
Have you a solution or is it a bug ?
Thank in advance
Jose
__________________________________
Yahoo! FareChase: Search multiple travel sites in
one click.
http://farechase.yahoo.com
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
6807
days inactive
6811
days old
3 comments
2 participants
participants (2)
-
Bogdan-Andrei Iancu -
jltorre＠yahoo.com