Thanks it worked.. I added the lines you had extra

________________________________

From: David Villasmil [mailto:david.villasmil.work@gmail.com] Sent: Tuesday, June 17, 2008 3:35 PM To: Ali Jawad Cc: users@lists.openser.org Subject: Re: [OpenSER-Users] Enter Dialog info to database

Are you sure? that's strange... here's my cfg:

modparam("dialog","db_url","mysql://openser:xxxxxxx@localhost/openser")

modparam("dialog", "enable_stats", 0) modparam("dialog", "dlg_flag", 5) modparam("dialog", "default_timeout", 21600) modparam("dialog", "dlg_match_mode", 1) modparam("dialog", "db_mode", 1)

if (method=="INVITE") { # Store Dialog in db setflag(5);

You have to look at the table while the call is online.

----- Original Message -----

From: Ali Jawad mailto:ali.jawad@splendor.net

To: David Villasmil mailto:david.villasmil.work@gmail.com

Cc: users@lists.openser.org

Sent: Tuesday, June 17, 2008 2:28 PM

Subject: RE: [OpenSER-Users] Enter Dialog info to database

Well I did :-) and it did not work, no info is written into the db

With Regards

Ali Jawad

System Administrator

Splendor Telecom (www.splendor.net)

Beirut, Lebanon

Phone: +961 1 373725

Fax: + 961 1 375554

________________________________

From: David Villasmil [mailto:david.villasmil.work@gmail.com] Sent: Tuesday, June 17, 2008 3:27 PM To: Ali Jawad Subject: Re: [OpenSER-Users] Enter Dialog info to database

try it and you'll see ;)

On Tue, Jun 17, 2008 at 2:22 PM, Ali Jawad ali.jawad@splendor.net wrote:

Hi I am setting the flag as follows

if (is_method("INVITE")) {

setflag(4);

}

Is that the correct way ?

With Regards

________________________________

From: David Villasmil [mailto:david.villasmil.work@gmail.com] Sent: Tuesday, June 17, 2008 3:21 PM To: Ali Jawad Subject: Re: [OpenSER-Users] Enter Dialog info to database

You have to set the flag on incoming INVITEs to enable db on the dialog.

On Tue, Jun 17, 2008 at 2:18 PM, Ali Jawad ali.jawad@splendor.net wrote:

Hi All

I have the following dialog module setup

# ----- Dialog -----------

modparam("dialog", "db_url","mysql://openser:xxxxxxxxxxxxx@localhost/openser")

modparam("dialog", "db_mode", 1)

modparam("dialog", "dlg_flag", 4)

modparam("dialog", "enable_stats", 1)

modparam("dialog", "rr_param", "did")

If I execute

/usr/local/sbin/openserctl fifo dlg_list

I get the dialogs that are taking place. However there is nothing written into the database even for calls longer than 2 minute

Anything I missed here?

Thanks

_______________________________________________ Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users

-- This message has been scanned for viruses and dangerous content by MailScanner http://www.mailscanner.info/ , and is believed to be clean.

-- This message has been scanned for viruses and dangerous content by MailScanner http://www.mailscanner.info/ , and is believed to be clean.