Hi Klaus,
For me the same problem , But problem in Bye message , openser system
didn't recieve the Bye request from the UAC's.....
When its connected Behind the NAT with Different networks...
IN local network its really fine...
that means Not working in outside the world..
On 8/2/06, Klaus Darilion <klaus.mailinglists(a)pernau.at> wrote:
Hi Carsten!
First I would differ between ACK and CANCEL.
If you use statefull forwarding, then it is sufficient to just t_relay,
as tm will take care of hop-by-hop canceling. There is no need to
rewrite the R-URI. There is only one problem: If the INVITE processing
takes more time, than it may happen that the CANCEL hits the tm module
before the tm module created a transaction. Thus, I discard CANCEL
without existing transactions.
ACK: There are 3 kinds of possible ACK.
1. stateless, e.g. if you use sl_send_reply("404",""), then the
client
will send a "stateless" ACK. This ACK will be absorbed by openser as
soon as it is received and will never enter the routing logic. Thus, we
do not have to care about them.
2. statefull, sucessful call: The INVITE was answered with 200, thus the
caller sends an ACK to the callee. This ACK is in-dialog, and thus
should be routed by the loose_route block (no need to rewrite any URI)
3. statefull, unsuccessful call: The call was rejected or cancelled.
Thus, we have hop-by-hop ACKs. Thus, the ACK must be handled to the tm
moudle, which takes care of it (no need to rewrite any URI).
here is how I handle ACK and CANCEL. I did not had any issues with this
(running now since 1 year).
if ( is_method("CANCEL") && !t_check_trans() ) {
# CANCEL without matching INVITE transaction, ignore
# may happen if the INVITE is slower than the CANCEL
# ignore the CANCEL, as the client will retransmit it, and maybe
next time
# the INVITE transaction is already created
xlog("L_WARN","$ci CANCEL without matching transaction ... ignore
and discard.\n");
exit;
}
route(8); # disable mediaproxy (needs to see valid CANCEL
requests)
force_send_socket(83.136.32.160:5060); # force port 5060 as sending
port
if ( is_method("CANCEL") ) {
# CANCEL with matching INVITE transaction, just
# t_relay
xlog("L_INFO","$ci CANCEL with matching transaction ...
t_relay.\n");
t_relay();
exit;
}
# check every message for Remote-Party-Id: header and remove it
if (is_present_hf("Remote-Party-ID")) {
xlog("L_INFO", "$ci Remote-Party-ID header present
...removing\n");
remove_hf("Remote-Party-ID");
}
if (loose_route()) {
# loose route requests are not authenticated
xlog("L_INFO","$ci beginning loose_route processing...\n");
route(32); # handle in-dialog requests
exit;
}
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK; must be an ACK after a 487
xlog("L_INFO","$ci local end-to-end ACK for an existent INVITE
transaction detected ...t_relay()\n");
t_relay();
} else {
xlog("L_WARN","$ci ACK without matching transaction ... ignore
and discard.\n");
}
exit;
}
if ( has_totag() ) {
# in-dialog requests should be handled by loose_route
# this should be fixed in the client or in openser
xlog("L_ERR","$ci in-dialog request was not catched by loose_route
block, 403... \n");
xlog("L_ERR","$ci this is the complete message:\n");
xlog("L_ERR","$ci $mb\n");
sl_send_reply("403","in-dialog request without loose_route is not
allowed, this is a bug in the client or in this proxy\n");
exit;
}
route(7); # proxy authentication
regards
Klaus
Carsten Bock wrote:
Hi everybody,
Short question: Are there any best practices regarding the routing of
ACK Messages?
Currently we have the following logic implemented:
route {
[...]
##################################################################################################################
# Check for Re-Transmissions (not ACK/CANCEL)
###############################################################################################################
if ((method != "CANCEL") && (method != "ACK")) {
if (t_check_trans()) {
log(1, "Re-Transmission detected, message dropped.\n");
# Drop the message silently.
return;
}
}
##################################################################################################################
# Loose-Routing (RFC3261)
###############################################################################################################
if (loose_route()) {
route(10);
return;
}; # if (loose_route()) {
##################################################################################################################
# ACK/CANCEL Messages may be relayed
###############################################################################################################
if ((method == "CANCEL") || (method == "ACK")) {
if (uri != myself) {
# Und das Paket entsprechend weiterleiten
if (!t_relay("udp:outbound_proxy:outbound_proxy_port")) {
log(1, "Not possible to relay\n");
# Fehler melden
sl_reply_error();
return;
}
return;
}
}
[...]
##################################################################################################################
# Rest of "normal" Routing logic with number manipulation / Routing
to different Gateways / User Authorization/Authentication
###############################################################################################################
}
Is there any other method, to improve the routing of ACK/CANCEL
Messages? I would like to avoid all the number manipulation, checking
and choosing of a proper gateway....
I thought, this must (somehow) be possible since from a technical
perspective the ACK and CANCEL Message can be associated with a
corresponding INVITE Message (and the corresponding Transaction).
I've looked in the manual of the TM-Module and found the following
example:
if ( is_method("CANCEL") ) {
if ( t_check_trans() )
t_relay();
exit;
}
(
http://openser.org/docs/modules/1.1.x/tm.html#AEN460)
I guess, this example does not mean, that the URI gets rewritten
properly and the CANCEL-/ACK-Message would get properly relayed to the
destination, where it is supposed to end.
Is there any way to do it best? I've seen, that some clients do proper
loose-routing for ACK-Messages, but not all clients, so this is not a
solution.
Are there any other suggestions?
Thanks in advance,
Carsten
____________
Virus checked by G DATA AntiVirusKit
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
--
Thanks and Regards with cheers
Sunkara Ravi Prakash (Voip Developer)
Hyperion Technology
Kondapur, Hi-tech city,
Hyderabad.