RE: [Users] avp_load_radius format - sr-users

27 Apr 2006

This topic is very similar to my question in a past thread
(http://openser.org/pipermail/users/2006-April/004277.html)
I would like to add my experience.
	I'm using RADIATOR as my radius server.  When i was trying to return
3 AVP's from my DB i was using the next syntax.
		SIP-AVP=state1:on
		SIP-AVP=state2:off
		SIP-AVP=state3:sip:12345@mydomain.com

	This was causing an Access-Accept message with the next SIP-AVP
ATTRIBUTE:

	SIP-AVP =
"state1:on<9>SIP-AVP=state2:off<9>SIP-AVP=state3:sip:12345@mydomain.com"

	in Radiator you need to add a "special" syntax (very similar to
FreeRadius)

		SIP-AVP="state1:on"
		SIP-AVP="state2:off"
		SIP-AVP="state3:sip:12345@mydomain.com"

That solve my problem!!!.
Thanks to all.

Best Regards,

Ricardo Martinez.-	   

...
  -----Mensaje original-----
 De: Helge Waastad [mailto:helge@smartnet.no]
 Enviado el: Jueves, 27 de Abril de 2006 6:48
 Para: Klaus Darilion
 CC: users(a)openser.org
 Asunto: Re: [Users] avp_load_radius format

 Yes,
 I was already thinking the same....

 br hw

 tor, 27,.04.2006 kl. 11.49 +0200, skrev Klaus Darilion:
  Maybe you can add your experiences to the Wiki
(or Radius   docs)- there 
  is already a Radius section.

 regards
 klaus

 Helge Waastad wrote:
 > Aha,
 > that's it.
 > 
 > Thank's again.
 > 
 > I had to alter the operator in FreeRADIUS: SIP-AVP +=  
"avp:value"....
  > 
 > This happens when youre not really reading the man pages   thouroughly :-)
  > 
 > 
 > Again,
 > thanks a lot.
 > 
 > br hw
 > 
 > 
 > ons, 26,.04.2006 kl. 17.59 +0300, skrev Bogdan-Andrei Iancu:
 >> Hi Helge,
 >>
 >> I think more lines with SIP-AVP should be placed into   reply. I can say 
  >> this based on the openser code
processing the reply - it   looks for more 
  >> than one SIP-AVP RADIUS avps, each
containing only one SIP avp.
 >>
 >> regards,
 >> bogdan
 >>
 >>
 >> Helge Waastad wrote:
 >>
 >>> Hi,
 >>> and thanks for your answer.
 >>> You'll have to excuse me for not 100% grasping the logic.
 >>> A typical RADIUS answer would be:
 >>>
 >>> rad_recv: Access-Accept packet from host   195.18.134.150:1812,
id=207,
  >>> length=38
 >>> SIP-AVP = "voicemail:111111"
 >>>
 >>> So should more than one Access-Accept be sent with different
 >>> SIP-AVP=.... (I guess not)
 >>>
 >>> Or should the string value of SIP-AVP be consist of   several avps?
  >>>
 >>> I guess you can only respond with distinct attributes   from RADIUS?
  >>>
 >>> Rigth now I'm trying to see if I can do this by default  
FreeRADIUS setup
  >>> or if should move into rlm_perl...
 >>>
 >>> ....probably a revised OpenSER-RADIUS Howto should be made.
 >>> I can, for that sake, help..when I get it working :-)
 >>>
 >>> br hw
 >>>
 >>>
 >>>
 >>> ons, 26,.04.2006 kl. 11.16 +0300, skrev Bogdan-Andrei Iancu:
 >>>  
 >>>
 >>>> Hi Helge,
 >>>>
 >>>> you need to include several RADIUS AVPs into the   radius reply -
one for 
  >>>> each SIP AVP.
 >>>>
 >>>> regards,
 >>>> bogdan
 >>>>
 >>>> Helge Waastad wrote:
 >>>>
 >>>>    
 >>>>
 >>>>> Hi,
 >>>>> I just wonder if someone could give me a hint on how   to load
several
  >>>>> AVP's from RADIUS.
 >>>>>
 >>>>> I'm currently reponding with:
 >>>>> SIP-AVP=rpid:1111111
 >>>>> which parses the rpid avp.
 >>>>>
 >>>>> But what should the response look like if I want to   load
several avps?

>>>> (For group checking, ACl etc)?
>>>>
>>>> br hw
>>>>
>>>>
>>>>
>>>>      
>>>> 
   -- 
 Helge Waastad
 Senior Konsulent
 Smartnet

 _______________________________________________
 Users mailing list
 Users(a)openser.org
 http://openser.org/cgi-bin/mailman/listinfo/users