Hi Bogdan, please find attached my ser configuration. I'm using the cvs head version downloaded two days ago (22.06.04). Should be actual enough ;) Thanks a lot. Regards, Oliver # # $Id: ser.cfg,v 1.24 2003/11/11 15:32:36 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ # log into /var/log/messages debug=9 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # Additional Alias alias="sip.et123lab.de" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" # CPL-C module loadmodule "/usr/local/lib/ser/modules/cpl-c.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # -- cpl-c params -- modparam("cpl-c","cpl_db","mysql://xxxx:xxxx@localhost/ser") modparam("cpl-c","cpl_table","cpl") modparam("cpl-c","cpl_dtd_file","/usr/local/etc/ser/cpl-06.dtd") modparam("cpl-c","log_dir","/var/log/ser/cpl") modparam("cpl-c","proxy_recurse",2) modparam("cpl-c","proxy_route",1) modparam("cpl-c","lookup_domain","location") # -- timer settings -- modparam("tm","noisy_ctimer",1) # this will force timeout modparam("tm","fr_inv_timer",30) # sets the timeout for INVITE to 30 sec (default is 120) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("sip.et123lab.de", "subscriber")) { www_challenge("sip.et123lab.de", "0"); break; }; # handle REGISTER messages containing a CPL script cpl_process_register(); save("location"); break; }; # process CPL script log("cpl: start script processing now"); cpl_run_script("incoming","FORCE_STATEFUL"); log("cpl: script processing has been finished"); lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } Bogdan-Andrei IANCU [mailto:iancu@fokus.fraunhofer.de] wrote Hi Oliver, please send me your ser.cfg - it will help me to trace the problem. Also be sure you are using the latest cvs head version - there were some updates 1 or 2 weeks ago. Regards, Bogdan Brinker, Oliver wrote: