Re: [Serusers] HELP HELP HELP. I WANT TO USE CISCO GATEWAY!!!! - sr-users

3 Nov 2003

On Monday 03 November 2003 00:37, you wrote:
...
  You are the best alex. You have solved half of my
problems already. I now
 know what to do at the cisco end of things. But I need to know what I
 should do if I only want several cisco gateways to talk to each other.  You'll
have to write all the routing loging into ser.cfg
For example let's say have a gateway terminate 1+ calls (north america) and 
another one terminate international calls, so you could have something like 
this in your ser.cfg

<snip>
if(uri ~= "1[1-9][0-9]+@.*") {
	/* north american call */
	rewritehostport("xxx.xxx.xxx.xxx:5060") /* ip of north american box */
} else if (uri ~="011[0-9][0-9]+@.*") {
	/* international */
	rewritehostport("yyy.yyy.yyy.yyy:5060") /* ip of intl. box */
} else {
	// fall thru logic here
}

/* forward the request to the proper gateway */
if(!t_relay()) {
	sl_reply_error();
	break;
}
</snip>   

...
  How 
 do I put phone numbers on the SIP server and not username and passwords
 especially with the fact that cisco gateway doesn't register with SIP
 server.  Just make the username numeric only or if you prefer add a numeric alias
for 
each of your usernames.
You can always disable authentication in ser.cfg or allow certain IP addresses 
to get thru without authentication. Look at the 
www(proxy)_authorize(challenge)

...
  (How can I be adding phone numbers/IP address listings
of the 
 gateways to the SIP server without creating users) 
Even tho the CISCO boxes don't register on their own, you can manually 
register them on the SER box by using the serctl utility.
That way other UAs can dial-up the CISCO box to listen to an IVR for example.

...
  Thanks,
 AKIN

Hope it helps if not just email me back :)

Alex.