Hi,
Very new to kamailio, following instruction have copied the examples file for pcscf and ran kamaillo. I have installed ims modules, but I don't see to see any connection initiation towards to PCRF? Any clues on what I am doing wrong.
Thanks. Dees
root@kamalio:/etc/bind# more /etc/hosts 127.0.0.1 localhost 10.209.96.85 pcscf.kamailio-ims.org kamalio #10.209.96.92 pcrf.kamailio-ims.org
root@kamalio:/etc/bind# ping pcrf.kamailio-ims.org PING pcrf.kamailio-ims.org (10.209.96.92) 56(84) bytes of data. 64 bytes from 10.209.96.92: icmp_req=1 ttl=64 time=0.392 ms
All,
Is there a way I could check if IMS_qos is correctly loaded?
Looking forward to your suggestions.
thanks.
________________________________ From: Dees motosingh@yahoo.co.uk To: "sr-users@lists.sip-router.org" sr-users@lists.sip-router.org Sent: Sunday, 13 April 2014, 0:03 Subject: [SR-Users] PCSCF configuration towards pcrf Hi, Very new to kamailio, following instruction have copied the examples file for pcscf and ran kamaillo. I have installed ims modules, but I don't see to see any connection initiation towards to PCRF? Any clues on what I am doing wrong. Thanks. Dees
root@kamalio:/etc/bind# more /etc/hosts 127.0.0.1 localhost 10.209.96.85 pcscf.kamailio-ims.org kamalio #10.209.96.92 pcrf.kamailio-ims.org
root@kamalio:/etc/bind# ping pcrf.kamailio-ims.org PING pcrf.kamailio-ims.org (10.209.96.92) 56(84) bytes of data. 64 bytes from 10.209.96.92: icmp_req=1 ttl=64 time=0.392 ms
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi All, I have reached here where cdp module is failing any guidance? kind regards, root@kamalio:/etc/kamailio# /etc/init.d/kamailio start Segmentation fault [FAIL] Not starting Kamailio SIP server: invalid configuration file! ... failed! failed! [....] 0(6591) ERROR: <core> [cfg.y:3272]: yyparse(): cfg. parser: failed to find command Rx_AAR_Register 0(6591) : <core> [cfg.y:3411]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 744, column 28: unknown command, missing loadmodule? 0(6591) ERROR: <core> [cfg.y:3272]: yyparse(): cfg. parser: failed to find command Rx_AAR 0(6591) : <core> [cfg.y:3411]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 834, column 19: unknown command, missing loadmodule? 0(6591) ERROR: <core> [cfg.y:3272]: yyparse(): cfg. parser: failed to find command Rx_AAR 0(6591) : <core> [cfg.y:3411]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 878, column 16: unknown command, missing loadmodule? 0(6591) ERROR: <core> [cfg.y:3272]: yyparse(): cfg. parser: failed to find command Rx_AAR 0(6591) : <core> [cfg.y:3411]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 1024, column 19: unknown command, missing loadmodule? 0(6591) ERROR: <core> [cfg.y:3272]: yyparse(): cfg. parser: failed to find command Rx_AAR 0(6591) : <core> [cfg.y:3411]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 1050, column 21: unknown command, missing loadmodule? ERROR: bad config file (5 errors) 0(6591) WARNING: <core> [mem/q_malloc.c:444]: qm_free(): WARNING:qm_free: free(0) called from cdp_avp: mod.c: cdp_avp_destro[FAIL) 0(6591) INFO: cdp [mod.c:251]: cdp_exit(): CDiameterPeer child stopping ... ... failed! /etc/init.d/kamailio: 55: /etc/init.d/kamailio: log_faiulre_msg: not found
________________________________ From: Dees motosingh@yahoo.co.uk To: Dees motosingh@yahoo.co.uk; "sr-users@lists.sip-router.org" sr-users@lists.sip-router.org; Kamailio (SER) - Users Mailing List sr-users@lists.sip-router.org Sent: Monday, 14 April 2014, 14:05 Subject: Re: [SR-Users] PCSCF configuration towards pcrf
All,
Is there a way I could check if IMS_qos is correctly loaded?
Looking forward to your suggestions.
thanks.
________________________________ From: Dees motosingh@yahoo.co.uk To: "sr-users@lists.sip-router.org" sr-users@lists.sip-router.org Sent: Sunday, 13 April 2014, 0:03 Subject: [SR-Users] PCSCF configuration towards pcrf Hi,
Very new to kamailio, following instruction have copied the examples file for pcscf and ran kamaillo. I have installed ims modules, but I don't see to see any connection initiation towards to PCRF? Any clues on what I am doing wrong.
Thanks. Dees
root@kamalio:/etc/bind# more /etc/hosts 127.0.0.1 localhost 10.209.96.85 pcscf.kamailio-ims.org kamalio #10.209.96.92 pcrf.kamailio-ims.org
root@kamalio:/etc/bind# ping pcrf.kamailio-ims.org PING pcrf.kamailio-ims.org (10.209.96.92) 56(84) bytes of data. 64 bytes from 10.209.96.92: icmp_req=1 ttl=64 time=0.392 ms
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi I am seeing this core when I startup with cdp, cdp_avp modules, any clues
root@pcscf:/etc/kamailio# gdb /usr/sbin/kamailio core GNU gdb (GDB) 7.4.1-debian Copyright (C) 2012 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu". For bug reporting instructions, please see: http://www.gnu.org/software/gdb/bugs/... Reading symbols from /usr/sbin/kamailio...(no debugging symbols found)...done. [New LWP 9964]
warning: Can't read pathname for load map: Input/output error. [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `/usr/sbin/kamailio -f /etc/kamailio/kamailio.cfg -M 4 -c'. Program terminated with signal 11, Segmentation fault. #0 0x00007f08d9348d61 in ?? () from /usr/lib/kamailio/modules/cdp.so (gdb) backtrace #0 0x00007f08d9348d61 in ?? () from /usr/lib/kamailio/modules/cdp.so #1 0x00007f08d9348dae in ?? () from /usr/lib/kamailio/modules/cdp.so #2 0x00007f08d934b8f7 in diameter_peer_destroy () from /usr/lib/kamailio/modules/cdp.so #3 0x00007f08d934d1bc in ?? () from /usr/lib/kamailio/modules/cdp.so #4 0x00000000004fa5e0 in destroy_modules () #5 0x00000000004697db in cleanup () #6 0x000000000046a8dd in ?? () #7 0x0000000000472e9e in main ()
Best regards, Dees
________________________________ From: Dees motosingh@yahoo.co.uk To: Dees motosingh@yahoo.co.uk; "sr-users@lists.sip-router.org" sr-users@lists.sip-router.org Sent: Wednesday, 16 April 2014, 0:28 Subject: Re: [SR-Users] PCSCF configuration towards pcrf
Hi All, I have reached here where cdp module is failing any guidance? kind regards, root@kamalio:/etc/kamailio# /etc/init.d/kamailio start Segmentation fault [FAIL] Not starting Kamailio SIP server: invalid configuration file! ... failed! failed! [....] 0(6591) ERROR: <core> [cfg.y:3272]: yyparse(): cfg. parser: failed to find command Rx_AAR_Register 0(6591) : <core> [cfg.y:3411]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 744, column 28: unknown command, missing loadmodule? 0(6591) ERROR: <core> [cfg.y:3272]: yyparse(): cfg. parser: failed to find command Rx_AAR 0(6591) : <core> [cfg.y:3411]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 834, column 19: unknown command, missing loadmodule? 0(6591) ERROR: <core> [cfg.y:3272]: yyparse(): cfg. parser: failed to find command Rx_AAR 0(6591) : <core> [cfg.y:3411]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 878, column 16: unknown command, missing loadmodule? 0(6591) ERROR: <core> [cfg.y:3272]: yyparse(): cfg. parser: failed to find command Rx_AAR 0(6591) : <core> [cfg.y:3411]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 1024, column 19: unknown command, missing loadmodule? 0(6591) ERROR: <core> [cfg.y:3272]: yyparse(): cfg. parser: failed to find command Rx_AAR 0(6591) : <core> [cfg.y:3411]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 1050, column 21: unknown command, missing loadmodule? ERROR: bad config file (5 errors) 0(6591) WARNING: <core> [mem/q_malloc.c:444]: qm_free(): WARNING:qm_free: free(0) called from cdp_avp: mod.c: cdp_avp_destro[FAIL) 0(6591) INFO: cdp [mod.c:251]: cdp_exit(): CDiameterPeer child stopping ... ... failed! /etc/init.d/kamailio: 55: /etc/init.d/kamailio: log_faiulre_msg: not found
From: Dees motosingh@yahoo.co.uk To: Dees motosingh@yahoo.co.uk; "sr-users@lists.sip-router.org" sr-users@lists.sip-router.org; Kamailio (SER) - Users Mailing List sr-users@lists.sip-router.org Sent: Monday, 14 April 2014, 14:05 Subject: Re: [SR-Users] PCSCF configuration towards pcrf
All,
Is there a way I could check if IMS_qos is correctly loaded?
Looking forward to your suggestions.
thanks.
From: Dees motosingh@yahoo.co.uk To: "sr-users@lists.sip-router.org" sr-users@lists.sip-router.org Sent: Sunday, 13 April 2014, 0:03 Subject: [SR-Users] PCSCF configuration towards pcrf Hi, Very new to kamailio, following instruction have copied the examples file for pcscf and ran kamaillo. I have installed ims modules, but I don't see to see any connection initiation towards to PCRF? Any clues on what I am doing wrong. Thanks. Dees
root@kamalio:/etc/bind# more /etc/hosts 127.0.0.1 localhost 10.209.96.85 pcscf.kamailio-ims.org kamalio #10.209.96.92 pcrf.kamailio-ims.org
root@kamalio:/etc/bind# ping pcrf.kamailio-ims.org PING pcrf.kamailio-ims.org (10.209.96.92) 56(84) bytes of data. 64 bytes from 10.209.96.92: icmp_req=1 ttl=64 time=0.392 ms
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-
Dees