13 Jun
2008
13 Jun
'08
5:29 a.m.
Hi,
I have 3 trunk gateways, two are cisco 5300 with 4E1, the other is 16E1 audio codes.
Could I use dispatch module to load balance those gateways based weight I set.
I successfully setup dispatcher module to load 50%, 50% for two gateway.
regards,
Danile
13 Jun
13 Jun
9:45 a.m.
Hello,
On 06/13/08 05:29, Gang Liu (VSC) wrote:
Hi,
I have 3 trunk gateways, two are cisco 5300 with 4E1, the other is
16E1 audio codes.
Could I use dispatch module to load balance those gateways based
weight I set.
I successfully setup dispatcher module to load 50%, 50% for two gateway.
there is a patch on the tracker, but it had some issues and couldn't be
integrated.
If you use round robin, you could add the one with more capacity several
times, so it gets selected more often.
Cheers,
Daniel
regards,
Danile
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
--
http://www.asipto.com
12:03 p.m.
On Friday 13 June 2008, Gang Liu (VSC) wrote:
Hi,
I have 3 trunk gateways, two are cisco 5300 with 4E1, the other is 16E1
audio codes. Could I use dispatch module to load balance those gateways
based weight I set. I successfully setup dispatcher module to load 50%, 50%
for two gateway.
Hi,
you could also use the carrierroute module to configure a arbitrary
loadbalancing probability for each GW. For a simple scenario like this it
don't need a database.
Cheers,
Henning
6012
days inactive
6012
days old
2 comments
3 participants
participants (3)
-
Daniel-Constantin Mierla -
Gang Liu (VSC) -
Henning Westerholt