Dear Teigre: How can I slove this problem? Thanks. Sincerely Caxton 2006/7/11, Greger V. Teigre &lt;greger(a)teigre.com <mailto:greger@teigre.com>>: The BYE is loose routed, thus it will go to route(1). g-) Caxton wrote: Hi all: I have installed radius server, and I also configure the "ser.cfg" for the radius accounting. However, there is a problem confues me. While the sip session have set up, the radiusclient send a Request-Account packet to radius server immediately, than radius server can save the start-up time of the session into database. But after the session terminated, radiusclient do nothing(it should send a Accounting-Stop packet to radius server)!! Therefore, I can not have a complete time record. I try to look up the solution in seruser mailing list, but I can not find what I want. Please help me, thanks. Sincerely Caxton -----ser.cfg----- [cut] # -- acc params -- modparam("acc", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("acc", "log_level", 2) modparam("acc", "radius_flag", 1) modparam("acc", "report_ack", 0) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { log(1, "REGISTER: Authenticating user\n"); # Uncomment this if you want to use digest authentication if (!www_authorize("pc80.s206.tj.mcu.edu.tw <http://pc80.s206.tj.mcu.edu.tw/>", "subscriber")) { log(1, "REGISTER: Chanllenging user\n"); www_challenge(" pc80.s206.tj.mcu.edu.tw <http://pc80.s206.tj.mcu.edu.tw/>", "0"); break; }; save("location"); break; }; if(method=="INVITE") { log(1, "INVITE\n"); setflag(1); } if(method=="MESSAGE") { log(1, "MESSAGE\n"); setflag(1); } if(method=="BYE"||method== "CANCEL") { log(1, "BYE or CANCEL\n"); setflag(1); } [cut] ------------------------------------------------------------------------ _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org <mailto:Serusers@lists.iptel.org> http://lists.iptel.org/mailman/listinfo/serusers