24 Oct
2022
24 Oct
'22
8:55 p.m.
Hi Sir/Madam,
I'm trying to set a Fresswitch as the Voicemail server.
I set the #!define WITH_VOICEMAIL in the kamailio.cfg file to enable the default VoiceMail
configuration.
Set the voicemail server address as following :
voicemail.srv_ip = "10.120.100.179" desc "VoiceMail IP Address"
voicemail.srv_port = "5060" desc "VoiceMail Port"
And the kamailio server address is 10.120.100.180.
Here face the issue, the Subscribe message could NOT be authorized. The SUBSCRIBER message
with token could NOT be forworded to Freeswitch.
The log is also attached.
It's resllay strange. Please help check. Thanks!
BR,
Sparkle Zou
25 Oct
25 Oct
3:46 a.m.
If you are using default kamailio configuration, then Kamailio tries to do
authentication itself, rather then forwarding it to FreeSWITCH. So, you
must adopt the kamailio configuration accordingly.
Kind regards.
--
Muhammad Shahzad Shafi
Tel: +49 176 99 83 10 85
On Tue, Oct 25, 2022 at 9:19 AM SparkleZou <sparklezou(a)126.com> wrote:
Hi Sir/Madam,
I'm trying to set a Fresswitch as the Voicemail server.
I set the #!define WITH_VOICEMAIL in the kamailio.cfg file to enable the
default VoiceMail configuration.
Set the voicemail server address as following :
voicemail.srv_ip = "10.120.100.179" desc "VoiceMail IP Address"
voicemail.srv_port = "5060" desc "VoiceMail Port"
And the kamailio server address is 10.120.100.180.
Here face the issue, the Subscribe message could NOT be authorized. The
SUBSCRIBER message with token could NOT be forworded to Freeswitch.
The log is also attached.
It's resllay strange. Please help check. Thanks!
BR,
Sparkle Zou
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
4:17 a.m.
Hello,
you have to configure freeswitch to allow traffic from kamailio based on
ip address, not with username/password.
Cheers,
Daniel
On 25.10.22 02:55, SparkleZou wrote:
Hi Sir/Madam,
I'm trying to set a Fresswitch as the Voicemail server.
I set the #!define WITH_VOICEMAIL in the kamailio.cfg file to enable
the default VoiceMail configuration.
Set the voicemail server address as following :
voicemail.srv_ip = "10.120.100.179" desc "VoiceMail IP Address"
voicemail.srv_port = "5060" desc "VoiceMail Port"
And the kamailio server address is 10.120.100.180.
Here face the issue, the Subscribe message could NOT be authorized.
The SUBSCRIBER message with token could NOT be forworded to Freeswitch.
The log is also attached.
It's resllay strange. Please help check. Thanks!
BR,
Sparkle Zou
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - Online
Nov 7-10, 2022 (Europe Timezone)
* https://www.asipto.com/sw/kamailio-advanced-training-online/
6:11 a.m.
Hi Daniel,
Thanks!
Already configured on Freeswitch.
/usr/local/freeswitch/conf/vars.xml
<X-PRE-PROCESS cmd="set"
data="internal_auth_calls=false"/>
/usr/local/freeswitch/conf/autoload_configs/acl.conf.xml
<node type="allow" cidr="10.120.100.180/24"/>
For the call INVITE message, it works fine. NO need auth.
But the SUBSCRIBER message, seems different.
Strange.
BR,
Sparkle Zou
At 2022-10-25 16:17:11, "Daniel-Constantin Mierla" <miconda(a)gmail.com>
wrote:
Hello,
you have to configure freeswitch to allow traffic from kamailio based on ip address, not
with username/password.
Cheers,
Daniel
On 25.10.22 02:55, SparkleZou wrote:
Hi Sir/Madam,
I'm trying to set a Fresswitch as the Voicemail server.
I set the #!define WITH_VOICEMAIL in the kamailio.cfg file to enable the default VoiceMail
configuration.
Set the voicemail server address as following :
voicemail.srv_ip = "10.120.100.179" desc "VoiceMail IP Address"
voicemail.srv_port = "5060" desc "VoiceMail Port"
And the kamailio server address is 10.120.100.180.
Here face the issue, the Subscribe message could NOT be authorized. The SUBSCRIBER message
with token could NOT be forworded to Freeswitch.
The log is also attached.
It's resllay strange. Please help check. Thanks!
BR,
Sparkle Zou
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
Kamailio Advanced Training - Online
Nov 7-10, 2022 (Europe Timezone)
* https://www.asipto.com/sw/kamailio-advanced-training-online/
26 Oct
26 Oct
7:06 a.m.
Check if you have,
# IP authorization and user authentication
route[AUTH] {
...
# user authenticated - remove auth header
if(!is_method("REGISTER|PUBLISH"))
consume_credentials();
...
}
This basically allows only REGISTER and PUBLISH to be authenticated by
backend server (FreeSWITCH), so you have to add SUBSCRIBE (and all other
methods that you wish to be authenticated by backend server) to this list.
Hope this helps.
--
Muhammad Shahzad Shafi
Tel: +49 176 99 83 10 85
On Wed, Oct 26, 2022 at 9:39 AM SparkleZou <sparklezou(a)126.com> wrote:
Hi Daniel,
Thanks!
Already configured on Freeswitch.
/usr/local/freeswitch/conf/vars.xml
<X-PRE-PROCESS cmd="set"
data="internal_auth_calls=false"/>
/usr/local/freeswitch/conf/autoload_configs/acl.conf.xml
<node type="allow" cidr="10.120.100.180/24"/>
For the call INVITE message, it works fine. NO need auth.
But the SUBSCRIBER message, seems different.
Strange.
BR,
Sparkle Zou
At 2022-10-25 16:17:11, "Daniel-Constantin Mierla" <miconda(a)gmail.com>
wrote:
Hello,
you have to configure freeswitch to allow traffic from kamailio based on
ip address, not with username/password.
Cheers,
Daniel
On 25.10.22 02:55, SparkleZou wrote:
Hi Sir/Madam,
I'm trying to set a Fresswitch as the Voicemail server.
I set the #!define WITH_VOICEMAIL in the kamailio.cfg file to enable the
default VoiceMail configuration.
Set the voicemail server address as following :
voicemail.srv_ip = "10.120.100.179" desc "VoiceMail IP Address"
voicemail.srv_port = "5060" desc "VoiceMail Port"
And the kamailio server address is 10.120.100.180.
Here face the issue, the Subscribe message could NOT be authorized. The
SUBSCRIBER message with token could NOT be forworded to Freeswitch.
The log is also attached.
It's resllay strange. Please help check. Thanks!
BR,
Sparkle Zou
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussionssr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or
unsubscribe:https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
Kamailio Advanced Training - Online
Nov 7-10, 2022 (Europe Timezone)
* https://www.asipto.com/sw/kamailio-advanced-training-online/
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
798
days inactive
799
days old
4 comments
3 participants
participants (3)
-
Daniel-Constantin Mierla -
M S -
SparkleZou