20 May
2011
20 May
'11
10:14 a.m.
Dear all,
I'm trying to change the From uri and Dsplay but without sucess.
My config is as follow:
if(dp_translate("1111",
"$avp(s:frm_user_name)/$avp(s:test_frm_user_name)"))
--> i'm sending 2112202701 and I get back corectly 701
{
$avp(s:display) = $avp(s:test_frm_user_name);
$avp(s:fu_uri) = "sip:"
+ $avp(s:test_frm_user_name) + "@" + $fd;
xlog("alx ------- The avp(s:display):
$avp(s:display) ---- avp(s:fu_uri)=$avp(s:fu_uri) ----------\n"); --> I
see values 701 and sip:701@my_IP_address
uac_replace_from("$avp(s:display)","$avp(s:fu_uri)");
Here I log the fu and I see that nothing has
changed..
}
Do you have any ideas on that ?
I use Kamailio 3.1.3
Thank you in advance
Alex
23 May
23 May
4:45 a.m.
On Friday 20 May 2011, alex pappas wrote:
I'm trying to change the From uri and Dsplay but
without sucess.
My config is as follow:
if(dp_translate("1111",
"$avp(s:frm_user_name)/$avp(s:test_frm_user_name)")) --> i'm sending
2112202701 and I get back corectly 701 {
$avp(s:display) = $avp(s:test_frm_user_name);
$avp(s:fu_uri) = "sip:" +
$avp(s:test_frm_user_name) + "@" + $fd;
xlog("alx ------- The avp(s:display):
$avp(s:display) ---- avp(s:fu_uri)=$avp(s:fu_uri) ----------\n"); --> I
see values 701 and sip:701@my_IP_address
uac_replace_from("$avp(s:display)","$avp(s:fu_uri)"); Here I log the
fu
and I see that nothing has changed..
}
Hi Alex,
i guess your changes to the from header are not visible because they are not
applied yet. They should be visible on the message that is send out to the
network, have you looked to a trace? Otherwise you could use the
apply_msg_change method, then it should be also visible:
http://www.kamailio.org/docs/modules/3.1.x/modules/textopsx.html#msg_apply_…
Cheers,
Henning
25 May
25 May
3:19 a.m.
Henning hi,
I did looked the trace and the headers were the same.
In Kamailio-1.5.3 it worked. In Kamailio 3.x.x it seems to not behave
properly and I dont understand why since it does not require any special
configuration.
Any other ideas ?
Cheers
Alex
2011/5/23 Henning Westerholt <henning.westerholt(a)1und1.de>
On Friday 20 May 2011, alex pappas wrote:
I'm trying to change the From uri and Dsplay
but without sucess.
My config is as follow:
if(dp_translate("1111",
"$avp(s:frm_user_name)/$avp(s:test_frm_user_name)")) --> i'm sending
2112202701 and I get back corectly 701 {
$avp(s:display) = $avp(s:test_frm_user_name);
$avp(s:fu_uri) = "sip:" +
$avp(s:test_frm_user_name) + "@" + $fd;
xlog("alx ------- The avp(s:display):
$avp(s:display) ---- avp(s:fu_uri)=$avp(s:fu_uri) ----------\n"); --> I
see values 701 and sip:701@my_IP_address
uac_replace_from("$avp(s:display)","$avp(s:fu_uri)"); Here I log the
fu
and I see that nothing has changed..
}
Hi Alex,
i guess your changes to the from header are not visible because they are
not
applied yet. They should be visible on the message that is send out to the
network, have you looked to a trace? Otherwise you could use the
apply_msg_change method, then it should be also visible:
http://www.kamailio.org/docs/modules/3.1.x/modules/textopsx.html#msg_apply_…
Cheers,
Henning
4965
days inactive
4970
days old
2 comments
2 participants
participants (2)
-
alex pappas -
Henning Westerholt